References
Nezami, F. N.: Automatisiertes Preforming von Kohlefaserhalbzeugen mit aktiven Materialführungssystemen zur Herstellung komplexer Faserverbundstrukturen. (Automated preforming of carbon-fiber semifinished products with active material guidance systems for the production of complex fiber composite structures.) Dissertation, TU Dresden, Faculty of Mechanical Science and engineering, 2015
Owston, C. N.: Eddy current methods for the examination of carbon-fibre-reinforced epoxy resins. In: Materials Evaluation 34 (1976), pp. 37–244
Schulze, M. H.; Heuer, H.; Küttner, M.; Meyendorf, N.: High-resolution eddy current sensor system for quality assessment of carbon-fiber materials. In: Microsystem Technologies 16 (2010), No. 5, pp. 791–797
Bardl, G.; Nocke, A.; Cherif, C.; Pooch, M.; Schulze, M.; Heuer, H.; Schiller, M.; Kupke, R.; Klein, M.: Automated detection of yarn orientation in 3-D-draped carbon-fiber fabrics and preforms from eddy current data. In: Composites Part B: Engineering 96 (2016), pp. 312–324
Mizukami, K.; Mizutani, Y.; Todoroki, A.; Suzuki, Y.: Detection of in-plane and out-of-plane fiber waviness in unidirectional carbon-fiber-reinforced composites using eddy current testing. In: Composites Part B: Engineering 86 (2016), pp. 84–94
Heuer, H.; Schulze, M.; Pooch, M.; Gäbler, S.; et al.: Review on quality assurance along the CFRP value chain — Non-destructive testing of fabrics, preforms and CFRP by HF radio wave techniques. In: Composites Part B: Engineering 77 (2015), pp. 494–501
Gäbler, S.: Untersuchung des Anwendungspotenzials der Hochfrequenzwirbelstrommesstechnik zur Charakterisierung dielektrischer Eigenschaften von Epoxidharzen und Faserverbundmaterialien. Dissertation, TU Dresden, Faculty of Electrical Engineering
Thanks
The work on 3-D fiber orientation detection described here is part of the “3-D Fast” project that is funded by the European Regional Development Fund (ERDF) and the Free State of Saxony (funding code 100224749). The authors would like to thank the aforementioned institutions for the provision of financial resources. Parts of the findings represented here are based on work performed by Martin Schulze and Matthias Pooch (Fraunhofer IKTS) and Matthias Hübner and Andreas Nocke (TU Dresden), whom the authors wish to thank for kindly making them available.
Author information
Authors and Affiliations
About this article
Cite this article
Bardl, G., Kupke, R., Heuer, H. et al. Eddy current testing in CFRP production. Lightweight des worldw 11, 48–53 (2018). https://doi.org/10.1007/s41777-017-0061-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41777-017-0061-x