Preemptive spectral graph protection strategies on multiplex social networks
Abstract
Constructing effective and scalable protection strategies over epidemic propagation is a challenging issue. It has been attracting interests in both theoretical and empirical studies. However, most of the recent developments are limited to the simplified singlelayered networks. Multiplex social networks are social networks with multiple
layers where the same set of nodes appear in different layers. Consequently, a single attack can trigger simultaneous propagation in all corresponding layers. Therefore, suppressing propagation in multiplex topologies is more challenging given the fact that each layer also has a different structure. In this paper, we address the problem of suppressing the epidemic propagation in multiplex social networks by allocating protection resources throughout different layers. Given a multiplex graph, such as a social network, and k budget of protection resources, we aim to protect a set of nodes such that the percentage of survived nodes at the end of epidemics is maximized. We propose MultiplexShield, which employs the role of graph spectral properties, degree centrality and layerwise stochastic propagation rate to preemptively select k nodes for protection. We also comprehensively evaluate our proposal in two different approaches: multiplexbased and layerbased node protection schemes. Furthermore, two kinds of common attacks are also evaluated: random and targeted attack. Experimental results show the effectiveness of our proposal on realworld datasets.
Keywords
Multiplex networks Graph mining Epidemic contagion Node immunizationIntroduction
Realworld networks reveal the existence of multiple levels relationships. For instance, in social networks, an individual can possess membership of several communities which range in different functionalities from intimate (e.g., families, friends, clubs) to more serious (e.g., businesses, schools). In social networks, one can categorize edges based on the nature of the relationships (i.e., ties) or actions that they represent (Kivela et al. 2014). Reducing a social system to a network in which actors are connected in a pairwise fashion by only a single type of relationship is often a crude approximation of reality. Furthermore, the current insights in complex network analysis does not only consider networks as isolated graphs, but also characterizes how a network interacts with other networks and how this interaction affects epidemic spreading that occur on top of them (Kivela et al. 2014).
Multiplex social networks are social networks with multiple layers where the same set of nodes appears in different layers (Abraham et al. 2013). Each layer describes the different types of interactions. An example of a multiplex network is a social network in which the different layers represent different types of social relationships. For instance, we can assign friendship ties, family ties, and coworker ties in three different layers.
The main contributions of our paper can be summarized as the following three points:
Problem formulations
We formalize the problem of suppressing propagation spreading in multiplex network by allocating protection resources throughout the different network layers. We define the Multiplex Graph Protection Problem as a discrete combinatorial optimization. We also introduce that the problem is NPHard. To the best of our knowledge, we are the first to analyze the hardness of this multiplex graph protection problem. Furthermore, we also specify two different protection scheme to consider different epidemic spreading scenario in multiplex networks.
Effective and scalable algorithm
We develop an effective and scalable algorithm to suppress the epidemics spreading on multiplex networks, called MULTIPLEXSHIELD. We find that MULTIPLEXSHIELD is scalable for large graphs and gives more effective protection compared with other competing methods such as Acquaintance Vaccination (AV) (Wang et al. 2015), Targeted Immunization Method (TIM) (Buono and Braunstein 2015), SpreadingDegree (Zhao et al. 2014) and Random Immunization (Zuzek et al. 2015; Wu et al. 2016; Zhao et al. 2014). In addition, we also show the analysis of our proposal, including the complexity of memory allocation and computational complexity. To the best of our knowledge, we are also the first to develop multiplex graph protection strategy by considering and evaluating not only the effectiveness but also the scalability of method for large size graph application.
Extensive evaluations
We perform comprehensive experiments on multiple realworld network datasets. Our proposed algorithms outperform other competing methods. We also show that MULTIPLEXSHIELD is scalable with respect to the changing of graph size in terms of number of nodes and edges, which means it is suitable for large size graphs.
The remainder of this paper is organized in the following manner: We review the recent most related studies in “Related work” section. We formalized the problem and definition in Problem Formulation section. We present and analyze our proposed methods in “MULTIPLEXSHIELD: preEmptive spectral graph protection” section. The result of experimental simulations are provided in Evaluations section. Finally, we elaborate the limitation and possible future challenges of our work in the “Discussions” section and provide concluding remarks in “Conclusions”.
Related work
In this section, we review the related work, which can be categorized into three parts: graph protection, influence maximization, and influence blocking maximization.
Graph protection
Most of the recent work in graph protection focused on the singlelayered graph and does not provide much consideration on multiplex topologies. In singlelayered graph protection scheme, there are two common approaches: preemptive and postemptive protection. Two preemptive algorithms have been proposed, called NetShield (Tong et al. 2010) and Netshield+ (Chen et al. 2016) which employ the properties of matrix perturbation to find a set of nodes to be immunized (Tong et al. 2010). Later, in 2016, Chen et al. improved the batching strategy of NetShield and demonstrated a better performance using Netshield+ (Chen et al. 2016). In 2017, GraphShield method was proposed by taking into account the role of infection flow, graph connectivity, and outdegree centrality (Wijayanto and Murata 2017). Meanwhile, some approaches to postemptive graph protection also have been proposed in (Zhang and Prakash 2014; 2015; Song et al. 2015). Zhang and Prakash (2014; 2015) introduced DAVA and DAVAfast, two polynomialtime heuristics algorithms. NIIP (Song et al. 2015) extracts a maximum directed acyclic graph from the graph then performs a Monte Carlo simulation to estimate the distribution of k over each time point t given the probability of a healthy node being infected. Nevertheless, compared to these simplified singlelayered isolated assumptions, the multilayered approach is more realistic due to the common interconnected properties of human social network.
The most related work to ours is multiplex graph protection. Zuzek et al. investigated random immunization method to protect k random functional nodes (Zuzek et al. 2015; Wu et al. 2016; Zhao et al. 2014). Wang et al. proposed acquaintance method which selects a set of random neighbor of a randomly chosen node (Wang et al. 2015). Later, Buono et al employed top k highdegree nodes for protection, termed Targeted Immunization Method (TIM) (Buono and Braunstein 2015). Similarly, Zhao et al. introduced an improvement of TIM, called Spreading Degree (Zhao et al. 2014). More recently, two independent work investigated several protection methods and concluded in favor of Explosive Immunization (EI) and Simulated Annealing (SA) methods (Osat et al. 2017;Zhao et al. 2017). The former method removed all the vertices the gradually reinserted to the network but aiming to prevent the formation of the giant connected component (GCC), until a stage where the GCC formation is inevitable. To add a new node, each node is measured and then chosen by a predefined kernel function. A major disadvantage of this method is that its total iteration get computationally costly, especially for large size network (Osat et al. 2017). The later method reintroduced one type of a traditional metaheuristic, which unfortunately not scalable and required a significant amount of running time to converge (Nourani and Andresen 1998;Du and Swamy 2016). Thus, both of EI and SA are not promising for large size network application.
All of these works on multiplex graph protection assumed that the infection would start from a random node, which called random attack. In contrast, our work enhances this assumption by also investigating the more powerful type of attack, targeted highdegree attack. Also, contrary to previous approaches which accomplish protection strategy without scalability objective, we aim to develop a more effective and faster method that scales to large size network. Furthermore, the elaboration of spectral properties of the graph as our proposal has not been considered in these recent literatures.
Influence maximization
The influence maximization task in multilayered topology shares a similar goal with ours. It aims to find a set of vertices to control the influence propagation in the network. However, while the influence maximization task aims to maximize the influence spreading (Nguyen et al. 2013;Zhang et al. 2016;Zhang and Zhang 2015), the graph protection tries to encounter and limit those spreading process. Nguyen et al. (2013) demonstrated a coupling scheme to reduce the multiplex graphs into a single layer graph by maintaining the influence properties, therefore applying influence maximization task in the reduced network. Despite the benefit of that lossless coupling scheme, Zhang et al. (2016) introduced a lossy coupling scheme of multiplex influence maximization to overcome the running time and memory consumption issues.
Influence blocking maximization
He et al. (2012) introduced the influence blocking maximization (IBM) problem to elaborate the competitive influence propagation in social networks under the competitive linear threshold (CLT) model. In IBM problem, one entity aims to block the influence propagation of its opposing counterpart as much as possible by strategically selecting a set of seed nodes to initialize its own influence. IBM problem is another type of competitive influence maximization under the constraint of opposing effect of each party’s influence. For instance, when a negative rumor spreads in the social network about an institution, the institution needs to respond quickly by choosing other seed nodes to inject positive opinions about the institution. The positive opinions spreading are expected to fight against the negative rumor. Thus, in IBM problem, the positive opinions also spread over the network with a certain infection probability. While in our graph protection problem, each protected set of nodes are selected preemptively and have no probability to transmit the protection attributes to their neighbors.
To summarize, none of these literatures focused on the study of suppressing the epidemic spreading via preemptive spectral graph protection in multiplex networks.
Problem formulation
Summary of terms and notations
Notation  Definition and description 

G=(V,E_{1},…,E_{ L })  Multiplex graph G with the node set V and the edge set E_{1,…,L} 
A  Multiplex supra adjacency matrix of graph G 
\(\mathcal {L}(A)\)  Combinatorial Laplacian matrix of A 
\(\mathcal {L}_{sym}(A)\)  Symmetric normalized Laplacian matrix of A 
\(\mathcal {L}_{rw}(A)\)  Random walk normalized Laplacian matrix of A 
n  Number of nodes in each multiplex layer 
m  Number of edges in each multiplex layer 
N  Number of nodes in graph G 
M  Number of edges in graph G 
L  Number of layers in graph G 
d(i)  Degree value (or outdegree value in directed graph) of node i 
PV(i)  Protection Value of node i 
α  Algebraic connectivity of \(\mathcal {L}_{rw}\) 
μ(i)  Corresponding Fiedler vector of \(\mathcal {L}_{rw}\) for node i 
β(i)  Infection probability at layer i 
δ(i)  Recovery probability at layer i 
ϕ  Number of initial infected nodes in a graph 
k  Number of available protection resources 
S  Set of nodes selected for protection 
η_{ G }(S)  Number of survived nodes of graph G at the end of epidemics 
θ_{ G }(S)  Percentage of survived nodes of graph G at the end of epidemics 
θ _{ ave }  Average of θ_{ G }(S) 
θ _{ std }  Standard deviation of θ_{ G }(S) 
Definition 1
where A_{ l }=a_{ij,l} be the adjacency matrix of layer l, with a_{ij,l}>0 if node i and j in layer l share a relationship type of l and a_{ij,l}=0 otherwise. Let consider the coupling matrices or interlayer adjacency matrices as identity matrix I, when all nodes in graph G participate in all multiplex layer or commonly defined as the fullyaligned multiplex network (Kivela et al. 2014). Thus, we can also obtain the multiplex supraadjacency matrix of G as
To maintain consistency and brevity, unless specified otherwise, we define G as the undirected network for all proofs and explanations in this paper. However, the generalization to the directed case can be performed without difficulty.
Definition 2
Susceptibleinfectedsusceptible (SIS) propagation model. SIS model defined that each node in graph G=(V,E) with N number of nodes, would be in one of the following two states: susceptible and infected. Let \(\mathcal {S}(t)\) be the number of susceptible nodes, and let \(\mathcal {I}(t)\) be the number of infected individuals at time t. At each timestamp t, susceptible nodes can be infected by their infected neighbors with probability β. Also, each infected node can get recovered to susceptible state with recovery probability δ. This model can be formalized as nonlinear differential equations:
being \(s(t) = \mathcal {S}(t)/N\) and \(i(t) = \mathcal {I}(t)/N\) the respective proportions of states at time t.
Definition 3
Multiplex graph protection problem. The input is given as follows: an undirected multiplex graph G=(V,E_{1},…,E_{ L }) with node set V and edge set E, SIS propagation model with infection probability β and recovery probability δ and an integer budget of k protection. Let us denote S, a subset of k nodes from graph G selected for protection. We define θ_{ G }(S) to be the percentage of survived nodes of graph G at the end of epidemics given that S was protected. Our goal is to find S∈V such that θ_{ G }(S) is maximized, subject to the size of S is equal to constraint k, i.e. calculating the following discrete combinatorial optimization:
Theorem 1
Multiplex graph protection problem is NPHard.
Proof
Zhang and Prakash (2014) have presented that DataAware Vaccination (DAV) problem is NPHard by reducing Minimum KUnion (MinKU) set problem (Vinterbo 2004) which was proven to be hard. In Wijayanto and Murata (2017), the authors proved the special case of MinKU, called FAVP, to be hard. They reduced the MinKU problem to an instance of FAVP problem with δ=1 and β=1, given that MinKU has instance a set S where S_{ i }⊆V and positive integer k. The Multiplex Graph Protection problem can be derived as a generalization of FAVP problem where L>1 for any given δ and β.
In the minimum kunion (MinKU) problem, we are given a set system with s sets and have to select k sets to minimize the size of their union. As in MinKU problem there is no specification of changing the state of each set as well as no transmission of state be specified, then we can reduce MinKU to an instance of multiplex graph protection problem in SIS model with β=1, δ=1, and the number of layer L=1. We can specify that this MinKU problem as a special case of multiplex graph protection problem. However, in the multiplex graph protection problem, the value of β and δ may vary as well as the number of layer L>1. While MinKU problem has proven to be NPHard (Vinterbo 2004), we can demonstrate that multiplex graph protection problem under SIS propagation model with any values of β and δ and consists of multiple layers is also NPHard. □
Protection scheme
Here we will specify the classification of protection scheme in multiplex networks. Recall that due to the interconnected properties of a multiplex network, the epidemic spreading can occur along the link of all corresponding layer of the network. Hence, the node protection scheme can be classified into two basic classes:

Layerbased Node Protection Scheme, where each protected node is uninfectable by its neighbors in a certain layer and meanwhile, its corresponding nodes in other layers still can get infected by their neighbors. This scheme can approximate the situation when the protection means an isolated state from infection spreading (Wu et al. 2016;Zhao et al. 2014). Thus, the isolation is only applicable in such layer. For instance, in a multiplex social network of neighborhood and colleague relationship, a person who is isolated from his/her office will lose connections to all of his/her colleagues, but still likely keeps connected with his/her neighbors. Thus the person is still infectable by his/her neighbors. In computer virus spreading, the office may provide personalized proxy or firewall for some of their employees’ notebook under WiFi connection. However, his/her notebook may still got infected at home or somewhere else. Another example, for a certain type disease without any proven vaccination, one student may got instructed to wear face mask at school. But, he/she may still got the disease from his/her neighbors.

Multiplexbased Node Protection Scheme, where each protected node is uninfectable during the contamination spreading in all corresponding layers. This scheme is most suitable for multilayer graph where each individual nodes are in the same certain awareness (Wu et al. 2016;Zhao et al. 2014). Thus, giving a protection to a certain node will change its states of corresponding nodes in all layers.
We illustrated these protection schemes in Fig. 1. In Fig. 1a, we are given a multiplex graph as input for Layerbased Node Protection Scheme. Let the number of available protection resources k=2 and the number of initial infected nodes ϕ=2 which are equally allocated at each layer, we got the current epidemics spreading and protection at timestamp t=0 as illustrated in Fig. 1b. Since it is layerbased node protection scheme, all of corresponding nodes of the protected nodes in other layers are still remain functional, i.e. not protected. Then, each of infected nodes has β probability of infecting its neighbors. Fig. 1c shows the example of current epidemics at timestamp t=1.
On the other hand, we provide the schematic illustration of the Multiplexbased Node Protection Scheme in Fig. 1df. For comparability, we are also given the same multiplex graph as input, as shown in Fig 1d. Additionally, we also use the same setting of k and ϕ to be equally allocated at each layer. As illustrated in Fig. 1e, each protected node is uninfectable during the contamination spreading in all corresponding layers, which give more protection benefit.
In this paper, we consider and investigate both of these protection schemes.
MULTIPLEXSHIELD: preEmptive spectral graph protection
In this section, we will describe our proposed preemptive spectral graph protection and justify our approach. Recall that our goal is to develop an effective and efficient method that is scalable for protecting multiplex networks. We introduce a novel nodes importance ranking score as a basis for determining k set of protected nodes S. Specifically, this ranking score intent to quantify the importance of set S, and the impact of their protection to the rest of the graph. With consideration of the spectral properties of multiplex topologies and epidemic propagation rate, we introduce this ranking based on three objectives.
Firstly, we aim to determine the nodes having the role as bridges connecting sub structures or spectral clusters in graph. Inspired by the benefit of algebraic connectivity of graph, graph partitioning task and spectral clustering problem, we propose the random walk normalized Fiedler vector to find such nodes in multiplex graph.
Secondly, we aim to find the nodes have the centers role in multiplex graph. We assume that this role can be determined based on the highest degree centrality value of nodes.
Thirdly, we aim to anticipate the different epidemic propagation rate in multiplex topologies. We propose to calculate the layerwise stochastic propagation rate from the ratio between the infection probability of one node to infect its neighbor and the recovery probability of infected node. This rate represents the strength of propagation and exhibits how quick the epidemics will spread.
Figure 2 illustrates the simplified example of schematic representation to implement our first and second objectives. Let an initial epidemic graph in Fig. 2a is given as input, which we may assume as a subset of a layer in an arbitrary multiplex graph. Intuitively, we want to localize any incoming epidemic spreading in the future by disconnecting spectral clusters of graph. In Fig. 2b, we select node v_{6}, which has the highest value of the random walk normalized Fiedler vector, to be protected. Specifically, all corresponding edges of v_{6} in graph are removed. This means v_{6} is effectively isolated during epidemic. Thus, also localized the future epidemic spreading into three disconnected clusters. Then, in Fig. 2c, we aim to protect the centers by selecting the nodes with highest value of degree centrality. Subsequently, we combine the Fig. 2bc objectives to protect the whole given graph.
Next we will describe the key components of our proposed method and clarify the justification in more detail.
Protecting bridges: random walk normalized Fiedler vector
To determine most suitable nodes for protection, we can intuitively localize any epidemic spreading by disconnecting substructures or clusters of the network. Motivated by the insight in graph partitioning and spectral clustering (Brouwer and Haemers 2012;von Luxburg et al. 2008), we introduce random walk normalized Fiedler vector to obtain the nodes having the role as bridges in a graph.
Let G=(V,E) be an undirected graph with nonnegative weights, N number of nodes and an adjacency matrix A. We can denote the degree matrix D as the diagonal matrix with the degree values d_{1},…,d_{ N } on the diagonal, I as the identity matrix and define the combinatorial Laplacian matrix as \(\mathcal {L} = D  A \). We order the eigenvalues of \(\mathcal {L}\) so that 0=λ_{1}≤λ_{2}≤λ_{3}≤…≤λ_{ N } with corresponding mutually orthonormal eigenvectors v_{1},v_{2},…,v_{ N }. We refer to λ_{2} and v_{2} as the algebraic connectivity and the Fiedler vector of the Laplacian, respectively.
Assuming that D is invertible, we can define two different normalized Laplacian matrices: the symmetric normalized Laplacian matrix \(\mathcal {L}_{sym}\) and the random walk normalized Laplacian matrix \(\mathcal {L}_{rw}\), as follow:
We denote the symmetric normalized Laplacian matrix \(\mathcal {L}_{sym}\) as it is a symmetric matrix, and the random walk normalized Laplacian matrix \(\mathcal {L}_{rw}\) as it is associated with the transition matrix of stochastic graph random walk, P=D^{−1}A.
The \(\mathcal {L}_{rw}\) has the nonnegative realvalued eigenvalues which can be ordered so that 0=α_{1}≤α_{2}≤α_{3}≤…≤α_{ N } with corresponding mutually orthonormal eigenvectors μ_{1},μ_{2},…,μ_{ N }. We refer to α_{2} and μ_{2} as the random walk normalized algebraic connectivity and the random walk normalized Fiedler vector, respectively. For simplicity, we will use the notation α and μ to denote α_{2} and μ_{2}.
The multiplicity ω of the eigenvalue 0 of both \(\mathcal {L}_{sym}\) and \(\mathcal {L}_{rw}\) are equivalent to the number of connected components in graph (von Luxburg 2007). While, the Fiedler vector of all \(\mathcal {L}, \mathcal {L}_{sym}\) and \(\mathcal {L}_{rw}\) can be used to separate graph G (Driessche and Roose 1995;von Luxburg et al. 2008), in the sense of selecting separator among clusters or subgraphs. An essential question then arises, which of the three Laplacian matrices should be used to compute the Fiedler vector? We clarify our proposal of involving the random walk normalized Fiedler vector as follows:
1. Graph partition point of view
In graph partitioning task, a graph G=(V,E) can be partitioned into two disjoint subsets, X,Y, where X∪Y=V,X∩Y=∅, by removing edges connecting the two subsets. A straightforward approach to construct this partition is by solving the mincut problem. Let denote the weighted adjacency matrix of the graph is the matrix W. In the mincut problem, we denote \(W(X,Y):= {\sum \nolimits }_{i \in X, j \in Y} w_{ij}\), where w_{ ij } is the weight of edges connecting node i and j. We also denote the complement of a subset X⊂V as \(\bar {X}\). The mincut problem aims to choose partitions X_{1},…,X_{ k } for a given number k of subsets which minimizes
Even though the mincut problem is obviously solvable, it does not guarantee satisfactory partitions. In many practical cases, the solution simply separates a single node from the rest of the graph. To overcome this issue, two common objectives functions had been proposed to improve the partition quality: RatioCut and NCut. Given that X denote the size of a subset X measured by its number of nodes, we can also denote vol(X) as the weights of all edges in X. These objective functions aim to minimize:
Using the RayleighRitz theorem, the solution of RatioCut minimization can be approximated by the Fiedler vector of \(\mathcal {L}\) unnormalized Laplacian of graph G. And by applying the similar approximation to NCut minimization, we can achieve both the Fiedler vector of \(\mathcal {L}_{sym}\) symmetric normalized and \(\mathcal {L}_{rw}\) random normalized Laplacian of graph G (von Luxburg 2007).
Recall that in Eq. 8, the minimization of RatioCut which employs unnormalized Laplacian can specify partitions such that nodes in the different cluster are dissimilar to each other. This means that RatioCut can minimize the similarities between clusters. While the NCut, as stated in Eq. 9, which employ the normalized Laplacian not only can achieve the same objective as RatioCut, but also able to maximize the similarities within clusters. The best partition of graph has low similarities between clusters and high similarities within clusters. To this end, \(\mathcal {L}_{rw}\) and \(\mathcal {L}_{sym}\) are in favor as the Fiedler vector base, than \(\mathcal {L}\).
2. Statistical consistency
Looking at the statistical consistency differences between the two normalized Fiedler vector of \(\mathcal {L}_{rw}\) and \(\mathcal {L}_{sym}\), von Luxburg (2007); von Luxburg et al. (2008) investigated the spectral clustering algorithms results of \(\mathcal {L}_{rw}\) and \(\mathcal {L}_{sym}\). The eigenvectors of \(\mathcal {L}_{rw}\) are cluster indicator vectors \(\mathbb {1}_{A_{i}}\). However, the eigenvectors of \(\mathcal {L}_{sym}\) are additionally multiplied with D^{1/2}, which might lead to undesired convergences. Empirical results of spectral clustering are also in favor of \(\mathcal {L}_{rw}\). As using \(\mathcal {L}_{sym}\) does not have any computational benefits, selecting \(\mathcal {L}_{rw}\) is more preferable.
3. Regular and irregular graph applicability
Let us consider the degree distribution of the similarity graph. The utilization of Laplacian matrix \(\mathcal {L}\) can provide a satisfactory result for partitioning the regular graphs. If the graph G=(V,E) is very regular and most nodes have approximately the same degree, then all the Laplacians \(\mathcal {L}\), \(\mathcal {L}_{rw}\) and \(\mathcal {L}_{sym}\) will deliver similar and consistent result. In contrary, if the degree distribution of graph G are very broadly distributed, the partitions of using Fiedler vector of \(\mathcal {L}\) are considerably worse than that of \(\mathcal {L}_{rw}\). Therefore, the random walk normalized Laplacian \(\mathcal {L}_{rw}\) are applicable in irregular graphs as well as in regular graphs (von Luxburg 2007).
Protecting centers: degree centrality
The role of degree centrality in networks has been discussed by some recent studies (SoléRibalta et al. 2014;Buono and Braunstein 2015;Zhao et al. 2014). There are many benefits of prioritizing the high degree nodes among others. In this work, we incorporate the benefit of this centralization to our method. Regard to the directed multiplex networks, the outdegree centrality is preferable. Outdegree centrality counts the number of neighbors that a certain node can infect.
Layerwise epidemic stochastic propagation rate
Given an arbitrary epidemic network, nodes can possess different states depending on the epidemic model. The model we simulate in this work is SIS model. In the SIS model, each node would belong to either susceptible or infected state. Susceptible nodes can be infected by their neighbors with infection probability β at each time stamp, and each infected node can recover to susceptible state with recovery probability δ.
In multiplex networks, different infections spread along different layer with specific stochastic propagation rate. Intuitively, this is the speed of spreading infection. In our work, we consider \(\frac {\beta (i)}{\delta (i)}\) as stochastic propagation rate at layer i.
Lemma 1
In multiplex network, stochastic propagation rate of layerwise epidemic spreading is defined by \(\frac {\beta }{\delta }\)
Proof
We consider a multiplex network G=(V,E_{1},…,E_{ L }) with L number of layer. Let us recall the nonlinear differential equations of SIS, \(\frac {ds}{dt} = \beta i s, \frac {di}{dt} = \beta i s  \delta i\). In any particular layer l, given that s+i=1, we can reformulate s as a function of i as follows:
This is an instance of a logistic equation. We can show that \(\frac {\beta }{\delta }\) determine i(t) using this logistic equation. If i(0)>0, it can be inferred that when \(\frac {\beta }{\delta } \leq 1\), then \({\lim }_{t \to + \infty } i(t) = 0\). If \(\frac {\beta }{\delta }>1\), then \({\lim }_{t \to + \infty } i(t) = 1  \frac {\delta }{\beta }\). □
Prakash et al. also demonstrated in empirical simulations that the \(\frac {\delta }{\beta }\) takes the role as constant dependent of epidemic threshold not only in SIS, but also in SIR, SIRS, and SEIR model (Prakash et al. 2011). Epidemic threshold is an intrinsic property of a network. When the strength of the virus is greater than the epidemic threshold, then the epidemic would breakout (Prakash et al. 2011).
MultiplexShield algorithms
Let us recall our goal to develop an effective and efficient method that scalable for protecting multiplex networks. Here we will describe our proposal, MULTIPLEXSHIELD algorithms. We define a novel nodes importance ranking score, called Protection Value (PV), as a basis for determining k set of nodes S to be preemptively protected. The higher score of the ranking, the higher importance of nodes to be selected under MULTIPLEXSHIELD. Protection Value is composed by considering the three previously explained objectives: protecting bridges of graph by random walk normalized Fiedler vector value; protecting centers of graph by degree centrality value; and layerwise epidemic propagation rate.
being β(j) and δ(j) the respective infection probability and recovery probability at layer j, while μ(i) is the ith element of μ vector.
μ vector consists of n elements at size of the number of nodes in the graph. The corresponding eigenvector of second smallest Laplacian of the graph dictates the optimal partition of the graph, which each element determine each node belong to a certain subpartition (Shi and Malik2000; Ng et al.2001). Using the nature of μ vector which approximates the minimization of normalized cut (Ncut), it forces nodes to create natural subpartition of graph based on μ(i) value (Shi and Malik 2000).
The more detail of \(\textsc {MultiplexShield}\mathbb {M}\) is given in Algorithm 1. It requires the adjacency matrix A and an integer k as the input and provides a set S of k vertices as the output. We compute the random walk normalized Fiedler vector in step 45. The positive and negative values of the random walk normalized Fiedler vector are treated equally. Then we initialize empty set S in step 6. The Nx1 vector PV measures Protection Value of each individual node. Then, in each iteration of steps 1416, we select top k nodes and add it into set S according to PV (step 11).
Furthermore, our implementation versions of layerbased protection scheme is \(\textsc {MultiplexShield}\mathbb {L}\) Algorithm. Assuming that the graph G has n number of nodes in each multiplex layer, we calculate layerwise PV of node i in layer j as:
Algorithm 2 explains the detailed procedure of \(\textsc {MultiplexShield}\mathbb {L}\). Given the adjacency matrix A and an integer k as the input, it results a set S of k nodes.
Next, we will provide the analysis of MULTIPLEXSHIELD algorithm in terms of computational complexity and cost of space.
Computational time complexity analysis
We will analyze first the computational time complexity of \(\textsc {MultiplexShield}\mathbb {M}\) algorithm (for MultiplexBased Protection Scheme). In Algorithm 1, the cost of calculating the second smallest eigenvalue of random walk normalized Laplacian (step 4) is O((N+M).(logN)^{O(1)}) using the Power method approximation (Trevisan 2014). If the graph is sparse and approximation error threshold (ε) is defined small, then the time needed will be almost linear, \(O\left (\frac {1}{\epsilon } m \log n \right)\). We know that the cost of step 1,3,5, and 6 are constant. Steps 813 cost O(n). For steps 1416, its cost is O(k).
Consequently, akin to Algorithm 1, we can also infer the computational time complexity of Algorithm 2
Memory allocation complexity analysis
The required memory allocation or space cost of steps 15 in Algorithm 1 are O(N+M+1):O(M) for storing the graph, O(M) for storing the degree matrix, O(N+M) for running the eigendecomposition algorithm, O(1) for storing α, O(N) for storing μ, and O(N) for storing the degree (d). The cost for step 6 is O(1). The space cost of steps 813 is O(N) which reusable during the iteration. Lastly, to store the output S set of nodes, we need O(k). By ignoring the constant term, we can summarize that the space cost of Algorithm 1
Similarly, we can also infer the space cost of Algorithm 2
Evaluations
In this section, we will provide experimental evaluation of MULTIPLEXSHIELD. The goal of this evaluation was to answer the following questions:
1. (Effectiveness) How effective is the proposed MULTIPLEXSHIELD in suppressing propagation spreading of real multiplex graphs? We define the measurement of effectiveness using the percentage of survived nodes of graph at the end of epidemics (θ_{ G }(S)).
2. (Scalability) How scalable is the proposed MULTIPLEXSHIELD with respect to the changing of graph size (n and m) and different k budget size?
Datasets
Statistics of dataset
Name  #Layers  #Nodes  #Edges  Density  Type 

Florentine Families  2  16  35  0.0726  undirected 
Krackhardt HighTech  3  21  312  0.1470  directed 
Vicker 7thGrader  3  29  740  0.1211  directed 
Lazega LawFirm  3  71  2,223  0.0589  directed 
Physician Innovation  3  246  1,551  0.0062  directed 
C.Elegans  3  279  5,863  0.0064  undirected 
Kapferer TailorShop  4  39  1,018  0.0572  directed 
CS Aarhus  5  61  620  0.0223  undirected 
Structure of each layer  
Name  #Edges of layer  Average degree of layer  
Florentine families  20; 15  1.3333; 1.0000  
Krackhardt HighTech  190; 102; 20  9.0476; 4.8571; 0.9524  
Vicker 7th grader  361; 181; 198  12.4483; 6.2414; 6.8276  
Lazega LawFirm  892; 575; 1104  12.5634; 8.0986; 15.5493  
Physician innovation  480; 565; 506  1.9917; 2.3444; 2.0996  
C.Elegans  1031; 1639; 3193  3.6953; 5.8746; 11.4444  
Kapferer TailorShop  316; 446; 109; 147  8.1026; 11.4359; 2.7949; 3.7692  
CS Aarhus  193; 124; 21; 88; 194  3.1639; 2.0328; 0.3443; 1.4426; 3.1803 

Florentine Families consists of 2 layers (marriage alliances and business relationships) describing Florentine families in the Renaissance (Padgett and Ansell 1993).

Krackhardt HighTech is the multiplex social network between managers of a hightech company consists of 3 kinds of relationships (Advice, Friendship, and “Reports to”) (Krackhardt 1987).

Vicker 7thGrader is the multiplex social network of 29 seventh grade students in a school in Victoria, Australia (Vickers and Chan 1981).

Lazega LawFirm dataset is the multiplex social network consists of 3 kinds of (Cowork, Friendship and Advice) between partners and associates of a corporate law partnership (Lazega 2001).

Physicians Innovation is the dataset representing the multiplex social network of a sample of physicians in 4 US towns: Illinois, Peoria, Bloomington, Quincy, and Galesburg (Coleman et al. 1957).

C.Elegans represents the multiplex neuronal network of the nematode (“Caenorhabditis Elegans”) which consists of 3 layers corresponding to different synaptic junctions: electric (“ElectrJ”), chemical monadic (“MonoSyn”), and polyadic (“PolySyn”) (Chen et al. 2006).

Kapferer TailorShop is the dataset of interactions in a tailor shop in Zambia (then Northern Rhodesia) over a period of ten months. Layers represent two different types of interaction, recorded at two different times (seven months apart) over a period of one month (Kapferer 1972).

CS Aarhus is the multiplex social network consists of five kinds of online and offline relationships (Facebook, Leisure, Work, Coauthorship, Lunch) between the employees of Computer Science department at Aarhus (Magnani et al. 2013).
Method comparisons
Recall that we consider two different stochastic propagation settings in multiplex protection: multiplexbased and layerbased node protection schemes. Here we compare the performance of the following methods:

Random Immunization: this method gives protection to k uniformly random functional nodes. This method was introduced in multiplexbased (Zhao et al. 2014;Wu et al. 2016) and layerbased protection scheme (Zuzek et al. 2015)

Acquaintance Vaccination (AV): this methods picks a set of random neighbor of a randomly chosen node (Wang et al. 2015).

Targetted Immunization Strategies (TIM): this method chooses k based on their degree ranking and combine the corresponding degree values of node in all layer (Buono and Braunstein 2015). Basically, TIM is introduced for multiplexbased protection scheme, but in this evaluation, we also implement the methods for layerbased scheme by selecting top k highdegree nodes.

Spreading Degree: which select k nodes having the highest multiplication of degree values and transmissibility of epidemics (β) in all layer (Zhao et al. 2014). This method can be implemented in multiplexbased and layerbased protection scheme. This is the current stateoftheart method in multiplex graph protection.

MultiplexShield: our proposed method to select k nodes based on spectral properties, degree ranking and stochastic propagation rate in each layer. We use \(\textsc {MultiplexShield}\mathbb {M}\) in multiplexbased protection scheme and \(\textsc {MultiplexShield}\mathbb {M}\) in layerbased protection scheme.
Evaluation metric
We measure the protection effectiveness result using a percentage of survived nodes of graph at the end of epidemics (θ_{ G }(S)). We compare the effectiveness of our proposed MULTIPLEXSHIELD methods against the baseline algorithms (Random Immunization, AV, TIM, and SpreadingDegree). On the other hand, we measure the scalability by evaluating the computational time of MULTIPLEXSHIELD on various value of the budget k to check how it scales with the changing of graph size (n and m).
Effectiveness evaluation
Here we will evaluate the effectiveness of our proposed methods. To comprehensively evaluate and compare methods, we provide simulations for 4 different settings: random nodes attack scenario (both for multiplexbased and layerbased protection scheme) and targeted highdegree nodes attack (both for multiplexbased and layerbased protection scheme as well). In random nodes attack, nodes are picked randomly, while in targeted highdegree nodes attack, the nodes with highest degree values are selected. Note that, common to previous literatures, they only evaluate on random attack scenario and do not consider the targeted attack (Wu et al. 2016;Zuzek et al. 2015;Buono and Braunstein 2015;Zhao et al. 2014). Even the evaluation in singlelayered graph protection literatures (Chen et al. 2016;Zhang and Prakash 2014;Wijayanto and Murata 2017;Song et al. 2015;Zhang and Prakash 2014), which are more mature, were still limited to random attack.
For the sake of comparability and repeatability, we use the common settings in singlelayered graph protection literatures (Chen et al.2016; Zhang and Prakash2014a, b; Wijayanto and Murata2017; Song et al.2015). Number of budget k=0.25 of n, stochastic infection probability (β) and recovery probability (δ) were set incrementally in all layers under range 0.5≤β≤0.9 similarly 0.5≤δ≤0.9 as commonly used by (Chen et al.2016; Zhang and Prakash2014a, b; Wijayanto and Murata2017; Song et al.2015). Note that in multilayer network the stochastic probability may be different in all layers. Here we will report the result of average and standard deviation of 100 times simulations equally for all comparison methods.

Random nodes attack scenario
In random nodes attack scenario, a set of ϕ nodes are randomly infected to initialize the epidemics spreading. Refer to previous literatures (Wijayanto and Murata 2017;Chen et al. 2016), we also set ϕ=k to initialize the epidemic process. The result can be described as follows:
Firstly, in MultiplexBased Protection Scheme, it can be seen from Table 3, that in all datasets MultiplexShield can achieve better performance than other competing methods. Note that the three last methods: TIM, SpreadingDegree, and MultiplexShield can consistently select the same k set of nodes in all 100 times simulations. This is due to their consistent selection criteria. On the other hand, Random Immunization and AV, due to their randomness nature, resulted different set of nodes which leads to it worst performance.Table 3Multiplexbased protection scheme, random nodes attack scenario
Methods
Florentine Families
Krackhardt HighTech
Vicker 7thGrader
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
82.09
5.60
76.94
2.20
77.99
1.89
AV
80.59
2.96
76.81
2.91
78.07
1.30
TIM
86.31
3.74
78.40
1.59
78.60
1.77
SpreadingDegree
86.38
4.86
78.44
1.47
78.56
1.26
MultiplexShield
88.22
4.88
80.11
2.11
80.85
1.25
Methods
Lazega LawFirm
Physician Innovation
C.Elegans
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
77.85
1.01
78.94
0.49
78.90
0.35
AV
77.95
1.04
78.86
0.38
78.96
0.41
TIM
78.51
0.83
79.23
0.38
80.13
0.62
SpreadingDegree
78.51
0.76
79.63
0.32
80.20
0.70
MultiplexShield
79.43
0.68
80.01
0.43
81.05
0.44
Methods
Kapferer TailorShop
CS Aarhus
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
80.78
0.72
82.32
0.57
AV
81.19
0.70
82.48
0.55
TIM
81.31
0.67
82.71
0.60
SpreadingDegree
81.42
0.71
82.72
0.55
MultiplexShield
82.07
0.75
83.21
0.74
Secondly, under LayerBased Protection Scheme, our proposed MultiplexShield also outperform other competing methods, as can be inferred from Table 4. Interestingly, we can analyze that under the same settings, multiplexbased protection scheme provides a better environment for all methods to achieve better effectiveness performance than in layerbased scheme.Table 4Layerbased protection scheme, random nodes attack scenario
Methods
Florentine Families
Krackhardt HighTech
Vicker 7thGrader
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
74.88
2.47
73.49
2.73
73.87
1.49
AV
77.38
3.05
73.92
1.38
74.24
1.29
TIM
85.34
5.79
74.63
1.63
74.18
1.51
SpreadingDegree
85.41
5.12
74.94
1.55
74.26
1.96
MultiplexShield
87.25
8.98
76.25
2.04
76.05
1.33
Methods
Lazega LawFirm
Physician Innovation
C.Elegans
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
73.53
0.80
73.96
0.33
73.97
0.47
AV
74.12
0.74
74.41
0.33
73.81
0.29
TIM
74.27
0.69
74.76
0.46
74.73
0.78
SpreadingDegree
74.49
0.90
74.52
0.70
74.85
0.66
MultiplexShield
75.15
0.71
75.72
0.56
75.36
0.52
Methods
Kapferer TailorShop
CS Aarhus
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
75.95
0.84
78.70
0.71
AV
76.17
1.02
78.69
0.74
TIM
76.42
0.82
78.82
0.83
SpreadingDegree
76.46
0.75
78.86
0.70
MultiplexShield
77.12
0.94
79.33
0.61

Targeted highdegree nodes attack scenario
While random attacks are commonly evaluated, we should note that scalefree networks are more vulnerable to highdegree attack due to its powerlaw degree distribution (Albert et al. 2000). Here we simulate a set of ϕ=k highdegree nodes as targeted initial infection. Also note that the aforementioned insight in random attack scenario also occurs in this scheme. MultiplexShield gives the consistent selection of k set protected nodes. The result of simulation in targeted highdegree attack can be summarized as follows:
Under MultiplexBased Protection Scheme, Table 5 depicted that our proposed MultiplexShield shows higher effectiveness than other competing methods in almost all of the datasets. In C.Elegans datasets, despite its slightly lower performance compared to degreeoriented methods (TIM and SpreadingDegree), our MultiplexShield is still competitive. The intuition of MultiplexShield result on this dataset under multiplexbased scheme is that the combination of all layer protection value for each node (which covers equally findings of best centers and bridges) are not suitable. This issue left us future investigation. Instead of equally assigned, what is the most suitable proportion of weighting for centers and bridges weight for each different graphs in our methods.Table 5Multiplexbased protection scheme, targeted highdegree nodes attack scenario
Methods
Florentine Families
Krackhardt HighTech
Vicker 7thGrader
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
83.28
3.06
76.86
1.28
77.97
1.18
AV
78.56
2.22
77.46
2.08
78.43
1.22
TIM
87.91
1.06
78.90
1.43
78.46
1.23
SpreadingDegree
88.13
1.26
78.67
1.43
78.62
1.34
MultiplexShield
89.66
1.45
80.25
1.44
80.10
1.35
Methods
Lazega LawFirm
Physician Innovation
C.Elegans
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
78.60
0.81
78.99
0.43
79.42
0.41
AV
78.68
0.85
79.23
0.34
78.82
0.32
TIM
78.85
0.69
79.37
0.45
81.44
0.40
SpreadingDegree
78.93
0.67
79.57
0.52
81.96
0.46
MultiplexShield
79.21
0.59
80.03
0.36
81.20
0.34
Methods
Kapferer TailorShop
CS Aarhus
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
80.74
0.94
82.73
0.65
AV
80.95
0.75
82.81
0.32
TIM
81.25
0.70
82.82
0.53
SpreadingDegree
81.30
0.69
82.88
0.46
MultiplexShield
82.41
0.89
83.11
0.51
Under LayerBased Protection Scheme, the average result of percentage of survived nodes at the end of epidemics shows the higher effectiveness of the MultiplexShield, as depicted in Table 6. We know that the layerbased protection scheme has similar properties of structure with singlelayered except the stochastic epidemic transmission probability.Table 6Layerbased protection scheme, targeted highdegree nodes attack scenario
Methods
Florentine Families
Krackhardt HighTech
Vicker 7thGrader
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
77.03
3.12
74.84
1.55
73.80
1.91
AV
77.09
1.99
73.92
2.08
73.78
1.81
TIM
87.78
0.90
75.08
1.33
74.16
1.49
SpreadingDegree
87.88
1.02
75.11
1.41
74.77
1.18
MultiplexShield
85.66
2.31
76.13
1.43
76.06
1.75
Methods
Lazega LawFirm
Physician Innovation
C.Elegans
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
72.94
0.90
74.36
0.45
74.56
0.41
AV
73.92
0.57
74.78
0.34
74.31
0.34
TIM
74.36
0.66
75.13
0.66
75.88
0.33
SpreadingDegree
74.37
0.94
75.18
0.47
76.11
0.26
MultiplexShield
75.14
0.70
76.03
0.31
76.60
0.42
Methods
Kapferer TailorShop
CS Aarhus
θ _{ ave }
θ _{ stdev }
θ _{ ave }
θ _{ stdev }
Random immunization
75.46
1.01
78.72
0.47
AV
76.03
1.16
78.73
0.49
TIM
76.47
0.80
78.77
0.53
SpreadingDegree
76.53
0.91
78.80
0.71
MultiplexShield
77.32
0.92
79.58
0.69
Scalability evaluation
Let us recall our second evaluation goal, which aims to measure how scalable is the proposed MULTIPLEXSHIELD with respect to the changing of graph size and different k budget size. Here we report the result of scalability evaluation. All of the experiments were simulated on the same machine with Intel i52520M CPU @ 2.50GHz x 4 and 4 GB memory, running Linux (2.6 kernel) 64bit. The computational running time is used for this scalability evaluation of MULTIPLEXSHIELD with respect to n (number of nodes) and m (number of edges), respectively. We evaluate on multiplex graph consisting of synthetic random graph in such a way that we can change the number of nodes but still maintain the number of edges and vice versa. Different values of k were used to evaluate the scalability in different scale of protection set.
To perform simulation by changing the number of nodes with a fixed number of edges (and vice versa), we generate multiplex networks using Erdos Renyi G(n,m) model (Erdos and Renyi 1959). The degree distribution of each generated layer follows the normal distribution.
Discussions
We have analyzed and evaluated our proposed methods to suppress the propagation of epidemic in multiplex social networks. In substance, our approaches may have limitations which rely on two essential assumptions: static network and preemptive protection scheme.
Firstly, we assume that the underlying network structure is static and remains unchanged as the contamination spreading arises. However, realworld social networks evolve dynamically with some users joining and leaving the networks, and relationships among users being formed and removed over time. This condition requires more complex analysis and modeling to incorporate the network evolution.
Secondly, we focus on the preemptive scheme by protecting the most critical nodes in a network before the epidemic started, aiming to inhibit its spreading. Given a limited k budget, we spend all the available budget prior any infection occurs. Despite its effective prevention, in existing large social networks such as Facebook and Twitter, protecting a particular set of nodes adaptively against the occurring contamination is more realistic. Instead of determining the set of protected nodes in a single time point, we can gradually select a node to respond adaptively the new incoming contaminant which changes over time. In this setting, a different contaminant may receive different protection scheme as a response.
Therefore, extending our algorithms into an adaptive scheme and accommodating the temporal dynamics of propagation into our analysis and model will become an interesting future direction.
Conclusions
In this paper, we have addressed the problem of suppressing the epidemic propagation in multiplex social networks using the preemptive spectral graph protection. We consider the role of graph spectral properties, degree centrality and layerwise stochastic propagation rate to preemptively select k most suitable nodes for protection. Thus, we proposed an effective and scalable algorithm, called MULTIPLEXSHIELD. We have evaluated our proposal in two different approaches: multiplexbased and layerbased node protection schemes. Besides, two kinds of common attacks have also evaluated: random and targeted attack. Results on various realworld multiplex datasets show that our proposed MULTIPLEXSHIELD not only effective but also scalable to suppress the epidemic spreading in multiplex networks.
Notes
Acknowledgements
A.W.W. thanks to Indonesia Endowment Fund for Education (LPDP) for the educational scholarship.
Funding
This work was supported by Tokyo Tech  Fuji Xerox Cooperative Research (Project Code KY260195), JSPS GrantinAid for Scientific Research(B) (Grant Number 17H01785) and JST CREST (Grant Number JPMJCR1687).
Availability of data and materials
All of the datasets used in this paper are publicly accessible online in their respective references. The code of MultiplexShield is available at http://bit.ly/MultiplexShield.
Authors’ contributions
All authors contribute to the writing of the paper. All authors read and approved the final manuscript.
Competing interests
The authors declare that they have no competing interests.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
 Albert, R, Jeong H, Barabasi AL (2000) Error and attack tolerance of complex networks. Nature 406:378–382.ADSCrossRefGoogle Scholar
 Abraham, I, Chechik S, Kempe D, Slivkins A (2013) Lowdistortion inference of latent similarities from a multiplex social network In: Proceedings of the Twentyfourth Annual ACMSIAM Symposium on Discrete Algorithms. SODA 2013, 1853–1883.. Society for Industrial and Applied Mathematics, Philadelphia, PA, USA.CrossRefGoogle Scholar
 Brouwer, AE, Haemers WH (2012) Spectra of Graphs. Springer, New York.CrossRefzbMATHGoogle Scholar
 Buono, C, Braunstein LA (2015) Immunization strategy for epidemic spreading on multilayer networks. EPL (Europhysics Letters) 109(2):26001.ADSCrossRefGoogle Scholar
 Du, KL, Swamy MNS (2016) Simulated Annealing. Springer, Cham.CrossRefGoogle Scholar
 Chen, BL, Hall DH, Chklovskii DB (2006) Wiring optimization can relate neuronal structure and function. Proc Natl Acad Sci USA 103(12):4723–4728.ADSCrossRefGoogle Scholar
 Chen, C, Tong H, Prakash BA, Tsourakakis CE, EliassiRad T, Faloutsos C, Chau DH (2016) Node immunization on large graphs: Theory and algorithms. IEEE Trans Knowl Data Eng 28(1):113–126.CrossRefGoogle Scholar
 Coleman, J, Katz E, Menzel H (1957) The diffusion of an innovation among physicians. Sociometry 20:253–270.CrossRefGoogle Scholar
 Driessche, RV, Roose D (1995) An improved spectral bisection algorithm and its application to dynamic load balancing. Parallel Comput 21(1):29–48.MathSciNetCrossRefzbMATHGoogle Scholar
 Erdos, P, Renyi A (1959) On random graphs i. Publ Math 6:290–297.MathSciNetzbMATHGoogle Scholar
 Gray, A, Greenhalgh D, Hu L, Mao X, Pan J (2011) A stochastic differential equation sis epidemic model. SIAM J Appl Math 71(3):876–902.MathSciNetCrossRefzbMATHGoogle Scholar
 He, X, Song G, Chen W, Jiang Q (2012) Influence Blocking Maximization in Social Networks under the Competitive Linear Threshold Model In: Proceedings of the 2012 SIAM International Conference on Data Mining, 463–474.. Society for Industrial and Applied Mathematics, Philadelphia, PA.CrossRefGoogle Scholar
 Kapferer, B (1972) Strategy and Transaction in an African Factory. Manchester University Press, Manchester.Google Scholar
 Kivela, M, Arenas A, Barthelemy M, Gleeson JP, Moreno Y, Porter MA (2014) Multilayer networks. J Complex Netw 2(3):203–271.CrossRefGoogle Scholar
 Krackhardt, D (1987) Cognitive social structures. Social Networks 9:104–134.MathSciNetCrossRefGoogle Scholar
 Magnani, M, Micenková B, Rossi L (2013) Combinatorial analysis of multiple networks. arXiv:1303.4986.Google Scholar
 Nguyen, DT, Das S, Thai MT (2013) Influence maximization in multiple online social networks In: 2013 IEEE Global Communications Conference (GLOBECOM), 3060–3065.Google Scholar
 Lazega, E (2001) The Collegial Phenomenon: The Social Mechanisms of Cooperation Among Peers in a Corporate Law Partnership. Oxford University Press, Oxford.CrossRefGoogle Scholar
 Nourani, Y, Andresen B (1998) A comparison of simulated annealing cooling strategies. J Phys A Math Gen 31(41):8373.ADSCrossRefzbMATHGoogle Scholar
 Osat, S, Faqeeh A, Radicchi F (2017) Optimal percolation on multiplex networks. Nat Commun 8(1):1540. http://arxiv.org/abs/1707.01401.ADSCrossRefGoogle Scholar
 Ng, AY, Jordan MI, Weiss Y (2001) On spectral clustering: Analysis and an algorithm In: Proceedings of the 14th International Conference on Neural Information Processing Systems: Natural and Synthetic. NIPS’01, 849–856.. MIT Press, Cambridge, MA, USA.Google Scholar
 Padgett, J, Ansell C (1993) Robust action and the rise of the medici, 14001434. Am J Sociol.:1259–1319.Google Scholar
 Prakash, BA, Chakrabarti D, Faloutsos M, Valler N, Faloutsos C (2011) Threshold conditions for arbitrary cascade models on arbitrary networks In: 2011 IEEE 11th International Conference on Data Mining, 537–546.Google Scholar
 Shi, J, Malik J (2000) Normalized cuts and image segmentation. IEEE Trans Pattern Anal Mach Intell 22(8):888–905.CrossRefGoogle Scholar
 SoléRibalta, A, De Domenico M, Gómez S, Arenas A (2014) Centrality rankings in multiplex networks In: Proceedings of the 2014 ACM Conference on Web Science. WebSci ’14, 149–155.. ACM, New York, NY, USA.Google Scholar
 Song, C, Hsu W, Lee ML (2015) Node immunization over infectious period In: Proceedings of the 24th ACM International on Conference on Information and Knowledge Management. CIKM ’15, 831–840.. ACM, New York, NY, USA.Google Scholar
 Tong, H, Prakash BA, Tsourakakis C, EliassiRad T, Faloutsos C, Chau DH (2010) On the vulnerability of large graphs In: 2010 IEEE International Conference on Data Mining, 1091–1096.Google Scholar
 Trevisan, L (2014) Lecture Notes on Expansion, Sparsest Cut, and Spectral Graph Theory. University of California, Berkeley, San Francisco.Google Scholar
 Vickers, M, Chan S (1981) Representing Classroom Social Structure. Victoria Institute of Secondary Education, Melbourne.Google Scholar
 Vinterbo, SA (2004) Privacy: a machine learning view. IEEE Trans Knowl Data Eng 16(8):939–948.CrossRefGoogle Scholar
 von Luxburg, U (2007) A tutorial on spectral clustering. Stat Comput 17(4):395–416.MathSciNetCrossRefGoogle Scholar
 von Luxburg, U, Belkin M, Bousquet O (2008) Consistency of spectral clustering. Ann Stat 36(2):555–586.MathSciNetCrossRefzbMATHGoogle Scholar
 Wang, Z, Zhao DW, Wang L, Sun GQ, Jin Z (2015) Immunity of multiplex networks via acquaintance vaccination. EPL (Europhysics Letters) 112(4):48002.ADSCrossRefGoogle Scholar
 Wijayanto, AW, Murata T (2017) Flowaware vertex protection strategy on large social networks In: The 2017 IEEE/ACM International Conference on Advances in Social Networks Analysis and Mining (ASONAM 2017). ASONAM 2017, 58–63.Google Scholar
 Wu, Q, Lou Y, Zhu W (2016) Epidemic outbreak for an sis model in multiplex networks with immunization. Math Biosci 277:38–46.MathSciNetCrossRefzbMATHGoogle Scholar
 Zhang, H, Nguyen DT, Zhang H, Thai MT (2016) Least cost influence maximization across multiple social networks. IEEE/ACM Trans Networking 24(2):929–939.CrossRefGoogle Scholar
 Zhang, Y, Prakash BA (2014) Dava: Distributing vaccines over networks under prior information In: Proceedings of the 2014 SIAM International Conference on Data Mining, 46–54.. SIAM, Philadelphia, PA, USA.CrossRefGoogle Scholar
 Zhang, Y, Prakash BA (2015) Dataaware vaccine allocation over large networks. ACM Trans Knowl Discov Data 10(2):20–12032.Google Scholar
 Zhang, Y, Prakash BA (2014) Scalable vaccine distribution in large graphs given uncertain data In: Proceedings of the 23rd ACM International Conference on Conference on Information and Knowledge Management. CIKM ’14, 1719–1728.. ACM, New York, NY, USA.Google Scholar
 Zhang, Y, Zhang S (2015) Influence maximization on multiphased multilayered network.Google Scholar
 Zhao, D, Wang L, Li S, Wang Z, Wang L, Gao B (2014) Immunization of epidemics in multiplex networks. PLOS ONE 9(11):1–5.Google Scholar
 Zhao, D, Wang L, Xu S, Liu G, Han X, Li S (2017) Vital layer nodes of multiplex networks for immunization and attack. Chaos, Solitons Fractals 105:169–175.ADSMathSciNetCrossRefzbMATHGoogle Scholar
 Zuzek, LGA, Buono C, Braunstein LA (2015) Epidemic spreading and immunization strategy in multiplex networks. J Phys Conf Ser 640(1):012007.CrossRefGoogle Scholar
Copyright information
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.