Abstract
Passive multichannel analysis of surface wave (MASW) is a nondestructive technique capable of exploring soil subsurface to a great depth by utilizing ambient long-wavelength passive surface waves without requiring an active source. The method yields subsurface information in terms of shear wave velocity (Vs) profile of the surveyed area. Vs is a vital dynamic property of soil which has numerous applications in various geotechnical and earthquake engineering problems. The accuracy of final Vs profile obtained by MASW technique primarily depends upon the resolution of the dispersion curve which is plot of frequency-dependent phase velocity of the propagating Rayleigh wave. The present study critically reviews the effects and influences of various geometrical parameters (such as the shape and size of receiver arrays) and the recording and processing parameters (such as acquisition time, sampling frequency, and vertical stacking) that control the quality of raw wavefield data and subsequent dispersion imaging. The study reveals that there is no fixed recommendation for any of the mentioned parameters to be used to obtain a high-resolution dispersion image in case of passive MASW survey. Therefore, extensive experimentations are required to further understand and develop standard guidelines for field experimentation and data processing so as to reinforce the method as a stand-alone technique.
Similar content being viewed by others
References
Park CB, Miller RD, Xia J (1996) Multi-channel analysis of surface waves using Vibroseis. In: 66th annual meeting of society of exploration geophysics, Denver, Expanded abstracts, pp 68–71
Park CB, Miller RD, Xia J (1999) Multichannel analysis of surface waves. Geophysics 64(3):800–808
Park CB, Miller RD, Xia J, Ivanov J (2007) Multichannel analysis of surface waves (MASW)—active and passive methods. Lead Edge 26(1):01–06
Dikmen U, Arisoy MO, Akkaya I (2010) Offset and linear spread geometry in the MASW method. J Geophys Eng 7:211–222
Imai T, Tonouchi K (1982) Correlation of N-value with S-wave velocity and shear modulus. In: Proceedings of the 2nd European symposium of penetration testing, Amsterdam, pp 67–72
Dikmen U (2009) Statistical correlations of shear wave velocity and penetration resistance for soils. J Geophys Eng 6(1):61–72
Uma Maheswari R, Boominathan A, Dodagoudarm GR (2010) Use of surface waves in statistical correlations of shear wave velocity and penetration resistance of Chennai soils. Geotech Geol Eng 28(2):119–137
Anbazhagan P, Kumar A, Sitharam TG (2013) Seismic site classification and correlation between standard penetration test N value and shear wave velocity for Lucknow city in Indo-Gangetic Basin. Pure Appl Geophys 170:299–318
Fauzi A, Irsyam M, Fauzi UJ (2014) Empirical correlation of shear wave velocity and N-SPT value for Jakarta. Int J GEOMATE 7(1):980–984
Lin CP, Chang CC, Chang TS (2004) The use of MASW method in the assessment of soil liquefaction potential. Soil Dyn Earthq Eng 24:689–698
Kanli AI, Tildy P, Pronay Z, Pinar A, Hermann L (2006) Vs30 mapping and soil classification for seismic site effect evaluation in Dinar region, SW Turkey. Geophys J Int 165:223–235
Picozzi M, Strollo A, Parolai S, Durukal E, Ozel O, Karabulut S, Zschau J, Erdik M (2009) Site characterization by seismic noise in Istanbul, Turkey. Soil Dyn Earthq Eng 29:469–482
Eker AM, Akgün H, Kockar MK (2012) Local site characterization and seismic zonation study by utilizing active and passive surface wave methods: a case study for the northern side of Ankara, Turkey. Eng Geol 151:64–81
Trupti S, Srinivas KNSSS, Kishore PP, Seshunarayana T (2012) Site characterization studies along coastal Andhra Pradesh-India using multichannel analysis of surface waves. J Appl Geophys 79:82–89
Uyanik O, Ekinci B, Uyanik NA (2013) Liquefaction analysis from seismic velocities and determination of lagoon limits Kumluca/Antalya example. J Appl Geophys 95:90–103
Anbazhagan P, Sitharam TG (2006) Evaluation of dynamic properties and ground profiles using MASW: correlation between Vs and N60. In: Proceedings at 13th symposium earthquake engineering, Indian Institute of Technology Roorkee
Tokimatsu K, Kuwayama S, Tamura S, Miyadera Y (1991) Vs determination from steady state Rayleigh wave method. Soil Found 31(2):153–163
Xia J, Miller RD, Park CB (2000) Advantages of calculating shear wave velocity from surface waves with higher modes. Society of Exploration Geophysics, Expanded abstract, Houston, pp 1295–1298
Park CB (2013) MASW for geotechnical site investigation. Lead Edge 32(6):656–662
Beaty KS, Schmitt DR, Sacchi M (2002) Simulated annealing inversion of multimode Rayleigh wave dispersion curves for geological structure. Geophys J Int 151:622–631
Xia J, Miller RD, Park CB, Tian G (2002) Determining Q of near surface materials from Rayleigh waves. J Appl Geophys 51:121–129
Xia J, Chen C, Li PH, Lewis MJ (2004) Delineation of a collapse feature in a noisy environment using MASW. Geotechnique 54(1):17–27
Gosar A, Stopar R, Roser J (2008) Comparative test of active and passive multichannel analysis of surface waves (MASW) methods and microtremor HVSR method. RMZ Mater Geoenviron 55:41–66
Tokimatsu K, Shinzawa K, Kuwayama S (1992) Use of short-period microtremors for Vs profiling. J Geotech Eng 118(10):1544–1558
Park CB, Miller, RD, Xia J (1998) Ground roll as a tool to image near-surface anomaly. In: 68th annual international meeting of the society of exploration geophysics, Expanded abstracts, pp 874–877
Miller RD, Xia J, Park CB, Ivanov J (1999) Multichannel Analysis of surface waves to map bedrock. Lead Edge 18(12):1392–1396
Xia J, Miller RD, Park CB (1999) Estimation of near-surface shear-wave velocity by inversion of Rayleigh waves. Geophysics 64:691–700
Moura R, Umaraliev R, Almeida F, Moro DG (2012) Vs measurements through dispersive wave methods in the urban environment of Porto (North Portugal). In: Proceedings at 15th world conference of earthquake engineering, Lisbon, Portugal
Dorman J, Ewing M (1962) Numerical inversion of seismic surface wave dispersion data and crust mantle structure in the New-York-Pennsylvania area. J Geophys Res 67:5227–5241
Park CB, Miller RD, Xia J (1998) Imaging dispersion curves of surface waves on multi-channel record. In: Proceedings of the 68th annual international meeting of the society of exploration geophysicists, Extended abstracts, pp 1377–1380
Comina C, Foti S, Boiero D, Socco LV (2011) Reliability of VS,30 evaluation from surface wave tests. J Geotech Geoenviron Eng ASCE 137(6):579–586
Aki (1965) A note on the use of microseisms in determining the shallow structures of the Earth’s crust. Geophysics 30:665–666
Okada H (2003) The microtremor survey method. Geophysical monograph series, no. 12. Society of Exploration Geophysicists (SEG), Tulsa
Kühn D, Ohrnberger M, Dahm T (2011) Imaging a shallow salt diapir using ambient seismic vibrations beneath the densely built-up city area of Hamburg, Northern Germany. J Seismolog 15:507–531
Jones R (1958) In-situ measurement of the dynamic properties of soil by vibration methods. Geotechnique 8(1):1–21
Jones R (1962) Surface wave technique for measuring the elastic properties and thickness of roads: theoretical development. Br J Appl Phys 13:21–29
Asten MW, Hentridge JD (1984) Array estimators and the use of microseisms for reconnaissance of sedimentary basins. Geophysics 40:1828–1837
Asten MW, Dhu T, Lam N (2004) Optimized array design for microtremor array studies applied to site classification; comparison of results with SCPT logs. In: 13th world conference on earthquake engineering, Canada
Molnar S, Cassidy JF, Monahan PA, Dosso SE (2007) Comparison of geophysical shear-wave velocity methods. In: Proceedings of the 9th Canadian conference on earthquake engineering, Ottawa, Canada, pp 390–400
Rosas RV, Aguirre J, Estrella HF, Arellano HM (2011) Microtremor studies using SPAC method: experiences and applications to four sites in Maxico. Geofis Int 50(3):295–312
Foti S, Comina C, Boiero D (2007) Reliability of combined active and passive surface wave methods. Riv Ital Di Geotec 41(2):39–47
Louie NJ (2001) Faster, better: shear wave velocity to 100 meters depth from refraction microtremor arrays. Bull Seismol Soc Am 91(2):347–364
Cox BR, Beekman AN (2011) Intra method variability in ReMi dispersion measurements and Vs estimates at shallow bedrock sites. J Geotech Geoenviron Eng ASCE 137:354–362
Cheng F, Xia J, Luo Y, Xu Z, Wang L, Shen C, Liu R, Pan Y, Mi B, Hu Y (2016) Multichannel analysis of passive surface waves based on cross correlations. Geophysics 81(5):1–10
Coccia S, Gaudio DV, Venisti N, Wasowski J (2010) Application of Refraction Microtremor (ReMi) technique for determination of 1-D shear wave velocity in a landslide area. J Appl Geophys 71:71–89
Panzera F, Lombardo G (2013) Seismic property characterization of lithotypes cropping out in the Siracusa urban area, Italy. Eng Geol 153:12–24
Heisey JS, Stokoe KH, Meyer AH (1982) Moduli of pavement systems from spectral analysis of surface waves. Transportation research record 852. Transportation Research Board, Washington, DC, pp 22–31
Nazarian S, Stokoe KH, Hudson WR (1983) Use of spectral analysis of surface waves method for determination of moduli and thicknesses of pavement systems. Transportation research record 930. National Research Council, Washington, DC, pp 38–45
Rix GJ, Bay JA, Stokoe KH (1990) Assessing in situ stiffness of curing Portland cement concrete with seismic tests. Transp Res Rec 1284:8–15
Ismail MA, Samsudin AR, Rafek AG, Nayan KAM (2012) Road pavement stiffness determination using SASW method. UNIMAS E J Civil Eng 3:9–16
Goh TL, Samsudin AR, Rafek AG (2011) Application of spectral analysis of surface waves (SASW) method: rock mass characterization. Sains Malays 40(5):425–430
Pamuk E, Ozdag OC, Ozyalın S, Akgun M (2017) Soil characterization of Tinaztepe region (Izmir/Turkey) using surface wave methods and Nakamura (HVSR) technique. Earthq Eng Eng Vib 16(2):447–458
Ryden N, Park CB, Ulriksen P, Miller RD (2004) Multimodal approach to seismic pavement testing. J Geotech Geoenviron Eng ASCE 130:636–645
McMechan GA, Yedlin MJ (1981) Analysis of dispersive waves by wave field transformation. Geophysics 46:869–874
Gabriels P, Snieder R, Nolet G (1987) In situ measurement of shear wave velocity in sediments with higher-mode Rayleigh waves. Geophys Prospect 35:187–196
Park CB, Miller RD, Laflen D, Neb C, Ivanov J, Bennett B, Huggins R (2004) Imaging dispersion curves of passive surface waves. In: 79th annual international meeting, society of exploration geophysics, Expanded abstracts, pp 1357–1360
Park CB, Miller RD (2005) Multichannel analysis of passive surface waves- modeling and processing schemes. In: Proceedings of ASCE/GeoInstitute geo-frontiers, pp 23–26
Roma V, Moura RMM (2009) The combined MASW and ReMi methods for seismic geotechnical site characterization. In: 13th conference of ANIDIS Bologna, Italy
Roma V, Tononi C, Karsli H (2011) Seismic geotechnical site characterization by MASW–ReMi method: importance of higher modes of Rayleigh waves. In: 6th congress of Balkan geophysical society Budapest, Hungary
Foti S, Lai CG, Rix GJ, Strobbia C (2014) Surface wave methods for near-surface site characterization. CRC Press, Boca Raton
Strobbia C, Foti S (2006) Multi-offset phase analysis of surface wave data (MOPA). J Appl Geophys 59(4):300–313
Foti S, Parolai S, Albarello D, Picozzi M (2011) Application of surface wave methods for seismic site characterization. Surv Geophys 32:777–825
Park CB, Miller RD (2008) Roadside passive multichannel analysis of surface waves (MASW). J Environ Eng Geophys 13:1–11
Weaver RL (1982) On diffuse waves in solid media. J Acoust Soc Am 71:1608–1623
Karray M, Lefebvre G (2008) Techniques for mode separation in Rayleigh wave testing. Soil Dyn Earthq Eng 29:607–619
Gucunski N, Wood RD (1992) Numerical simulation of the SASW test. Soil Dyn Earthq Eng 11:213–227
Tokimatsu S, Tamura H, Kojima (1992) Effects of multiple modes on Rayleigh wave dispersion characteristics. J Geotech Eng 118(10):1529–1543
Boaga J, Vignoli G, Deiana R, Cassiani G (2014) The influence of subsoil structure and acquisition parameters in MASW mode mis-identification. J Environ Eng Geophys 19:87–99
Park CB, Miller RD, Ryden N, Xia J, Ivanov J (2005) Combined use of active and passive surface waves. J Environ Eng Geophys 10:323–334
Moro DG, Pipan M, Forte E, Finnetti I (2003) Determination of Rayleigh wave dispersion curves for near surface applications in unconsolidated sediments. Expanded abstracts, Society of Exploration Geophysicists, Houston, pp 1247–1250
Luo Y, Xia J, Miller RD, Xu Y, Liu J, Liu Q (2008) Rayleigh wave dispersive energy imaging by high resolution linear Radon transform. Pure Appl Geophys 165:903–922
Yilmaz O (1987) Sesimic data processing. SEG, Houston
Yin X, Xu H, Wang L, Hu Y, Shen C, Sun S (2006) Improving horizontal resolution of high frequency surface wave methods using travel time tomography. J Appl Geophys 126:42–51
Mi B, Xia J, Shen C, Wang L, Hu Y, Cheng F (2017) Horizontal resolution of multichannel analysis of surface waves. Geophysics 82(3):51–66
Xia J, Chen C, Tian G, Miller RD, Ivanov J (2005) Resolution of high frequency Rayleigh wave data. J Environ Eng Geophys 10(2):25–36
Park CB (2005) MASW-horizontal resolution in 2-D shear-velocity (Vs) mapping. Kansas geological survey, open file report, No. 2005-4
Stokoe II KH, Wright GW, James AB, Jose MR (1994) Characterization of geotechnical sites by SASW method. In: Woods RD (ed) Geophysical characterization of sites. Oxford Publishers, Oxford
Xia J, Miller RD, Park CB, Ivanov J, Tian G, Chen C (2004) Utilization of high-frequency Rayleigh waves in near-surface geophysics. Lead Edge 23(8):753–759
Mohamed AME, Abu El Ata ASA, Abdel Azim F, Taha MA (2013) Site-specific shear wave velocity investigation for geotechnical engineering applications using seismic refraction and 2D multichannel analysis of surface waves. NRIAG J Astron Geophys 2:88–101
Banab KK, Motazedian D (2010) On the efficiency of the multichannel analysis of surface wave method for shallow and semideep loose soil layers. Int J Geophys 2010:1–14
Ariffin J, Ismail MAM, Tan CG, Murtadza NM (2015) Site characterization of marine clay deposits in South Seberang Prai, Penang using combined active and passive multichannel analysis of surface wave (MASW). IOP Conf Ser Mater Sci Eng 136:012032
Xia J, Miller RD, Park CB, Ivanov J (2000) Construction of 2-D vertical shear wave velocity field by the multichannel analysis of surface wave technique. In: Symposium on the application of geophysics to engineering and environmental problems, Arlington, pp. 1197–1206
Kanli AI, Kang TS, Pinar A, Tildy P, Pronay Z (2008) A systematic geophysical approach for site response of the Dinar region, Southwestern Turkey. J Earthq Eng 12(S2):165–174
Foti S, Parolai S, Bergamo P, Di Giulio G, Maraschini M, Milana G, Picozzi M, Puglia R (2011) Surface wave surveys for seismic site characterization of accelerometric stations in ITACA. Bull Earthq Eng 9:1797–1820
Park CB (2008) Imaging dispersion of passive surface waves with active scheme In: Symposium on the application of geophysics to engineering and environmental problems, Philadelphia
Park CB (2010) Roadside passive survey—dynamic detection of source location. In: Symposium on the application of geophysics to engineering and environmental problems, Colorado, pp 528–535
Yoon S (2011) Combined active–passive surface wave measurements at five sites in the western and southern US. KSCE J Civil Eng 15(5):823–830
MASW Home (2018) http://www.masw.com/ACQ-PassiveRoadside.html. Accessed 26 July 2018
Baglari D, Dey A (2017) Effects of source characteristics in passive roadside MASW survey. In: 52nd Indian geotechnical conference, Guwahati
Zekkos D, Sahadewa A, Woods RD, Stokoe KH (2014) Development of model for shear wave velocity of municipal solid waste. J Geotech Geoenviron Eng ASCE 140:04013030–04013031
Baglari D, Biswas S, Taipodia J, Dey A (2015) Aspects of dispersion imaging scheme of passive MASW survey for subsurface characterization. In: 50th Indian geotechnical conference, Pune
Tokimatsu K (1995) Geotechnical site characterization using surface waves. In: 1st international conference on earthquake geotechnical engineering, Japanese Geotechnical Society, pp 1333–1368
Rix GJ, Hebeler GL, Orozco MC (2002) Near surface Vs profiling in the New Madrid Seismic Zone using surface wave methods. Seismol Res Lett 73(3):380–392
Liu Y, Luke B, Pullammanappallil S, Louie J, Bay J (2005) Combining active and passive source measurements to profile shear wave velocities for seismic microzonation. In: Proceedings at geofrontiers 2005 congress, earthquake engineering and soil dynamics, ASCE geotechnical special publication (GSP), vol 133, p 14
Yoon S, Rix GJ (2004) Combined active–passive surface wave measurements for near-surface site characterization. In: Proceedings of symposium on the application of geophysics to engineering and environmental problems, pp 1156–1164
Brandes HG, Robertson IN, Johnson GP (2011) Soil and rock properties in a young volcanic deposit on the island of Hawaii. J Geotech Geoenviron Eng ASCE 137(6):597–610
Mahajan AK, Galiana-Merino JJ, Lindholm C, Arora BR, Mundepi AK, Rai N, Chauhan N (2011) Characterization of the sedimentary cover at the Himalayan foothills using active and passive seismic techniques. J Appl Geophys 73:196–206
Savvaidis A, Margaris B, Theodoulidis N, Lekidis V, Karakostas Ch, Loupasakis C, Rozos D, Soupios P, Mangriotis MD, Dikmen U, Tsangaratos P, Kokinou E, Vafidis A, Rondoyanni Th, Kalogeras I, Koutrakis S, Sarris A, Papadopoulos N (2014) Geo-characterization at selected accelerometric stations in Crete (Greece) and comparison of earthquake data recordings with EC8 elastic spectra. Cent Eur J Geosci 6:88–103
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Baglari, D., Dey, A. & Taipodia, J. A state-of-the-art review of passive MASW survey for subsurface profiling. Innov. Infrastruct. Solut. 3, 66 (2018). https://doi.org/10.1007/s41062-018-0171-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41062-018-0171-2