Skip to main content

Advertisement

SpringerLink
Log in

Rheological and Microstructural Investigation of the Effects of Rejuvenators on Reclaimed Asphalt Pavement Bitumen by DSR and AFM

  • Research paper
  • Published:
International Journal of Civil Engineering Aims and scope Submit manuscript

Abstract

Utilization of RAP in asphalt pavements may lead to severe quality problems, mostly due to asphalt aging phenomenon. Within the scope of this study, the use of rejuvenators to improve the properties of RAP is investigated. Two different types of waste oils together with a commercial rejuvenator are used. The rejuvenated bitumen samples are evaluated from both rheological and microstructural aspects. In addition, mixture testing also employed to investigate the effectiveness of used rejuvenators. Experimental studies on bitumen samples included conventional and Dynamic Shear Rheometer (DSR) testing and Atomic Force Microscopy (AFM) imagings. The results unveiled that, the utilization of rejuvenators can significantly improve the quality of recycled asphalt and threatened the aged bitumen quality. Missing bee-structures of aged bitumen samples evolve in a different type of surface topography while the mixtures performance evolves in terms of workability. The rejuvenation process provides viscous behavior to aged bitumen. The Rejuvenation Index (RI) which is a dimensionless value, simply evolves this fact. While the RI of the non-rejuvenated aged bitumen is taken as 1 (one) as per RI definition, the neat bitumen RI is calculated as 0.79, the RI of waste oils are calculated as 0.74 and 0.79 while the commercial sample RI is calculated as 0.60. Among the rejuvenators, waste oils showed similar results with almost same volume of peri- and para-phase since the commercial rejuvenator behaved more similar to neat bitumen. The rejuvenated samples workability performance improves using rejuvenating additives. Binder and mixture testing demonstrated high consistency and conformity with each other in terms of performance and aging characteristics. The results proved that, waste oils can be used as rejuvenating agents within RAP. Rejuvenators can significantly restore the properties of aged RAP bitumen and increase the amount of RAP in bituminous mixtures.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Chesner WH, Collins RJ, MacKay MH, Emery J (2002) User guidelines for waste and by-product materials in pavement construction. Federal Highway Administration (FHWA). FHWA-RD-97-148

  2. Kandhal PS, Mallick RB (1998) Pavement recycling guidelines for state and local governments participant’s reference book. Publication Numbers: FHWA-SA-98-042, Washington DC, USA

    Google Scholar 

  3. Tebaldi G, Dave EV, Marsac P, Muraya P, Hugener M, Pasetto M, Graziani A, Grilli A, Bocci M, Marradi A (2014) Synthesis of standards and procedures for specimen preparation and in-field evaluation of cold-recycled asphalt mixtures. Road Mater Pavement Des 15(2):272–299

    Article  Google Scholar 

  4. Soleimanbeigi A, Edil TB (2015) Compressibility of recycled materials for use as highway embankment fill. J Geotech Geoenviron Eng 141(5):04015011

    Article  Google Scholar 

  5. Puppala AJ, Saride S, Williammee R (2012) Sustainable reuse of limestone quarry fines and RAP in pavement base/subbase layers. J Mater Civ Eng 24(4):418–429

    Article  Google Scholar 

  6. Su K, Hachiya Y, Maekawa R (2009) Study on recycled asphalt concrete for use in surface course in airport pavement. Resour Conserv Recycl 54(1):37–44

    Article  Google Scholar 

  7. Kumari M, Ransinchung G, Singh S (2018) A laboratory investigation on Dense Bituminous Macadam containing different fractions of coarse and fine RAP. Constr Build Mater 191:655–666

    Article  Google Scholar 

  8. Zaumanis M, Mallick RB (2015) Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art. Int J Pavement Eng 16(1):39–55

    Article  Google Scholar 

  9. Kim Y, Im S, Lee HD (2011) Impacts of curing time and moisture content on engineering properties of cold in-place recycling mixtures using foamed or emulsified asphalt. J Mater Civ Eng 23(5):542–553

    Article  Google Scholar 

  10. Hansen KR, Copeland A, Association NAP (2013) Annual asphalt pavement industry survey on recycled materials and warm-mix asphalt usage: 2009–2012. National Asphalt Pavement Association

  11. Tao M, Mallick RB (2009) Effects of warm-mix asphalt additives on workability and mechanical properties of reclaimed asphalt pavement material. Transp Res Rec 2126(1):151–160

    Article  Google Scholar 

  12. Sonmez I, Topcu A, Yildirim S, Eren B, Gunay E, Kara M, Kavakli B (2011) "Recycling and reuse of old asphalt coatings in hot bituminous mixtures". 24th World Road CongressWorld Road Association (PIARC), pp 26–30. Mexico City, Mexico

  13. Fernández-Gómez WD, Rondón Quintana H, Reyes Lizcano F (2013) A review of asphalt and asphalt mixture aging: Una revisión. Ingenieria e investigacion 33(1):5–12

    Google Scholar 

  14. ASTM D (2013) Standard test method for penetration of bituminous materials. ASTM International, West Conshohocken

    Google Scholar 

  15. ASTM D (2014) Standard test method for softening point of bitumen (ring-and-ball apparatus). American Society for Testing and Materials, West Conshohocken, PA

    Google Scholar 

  16. ASTM D (2015) Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. American Societyfor Testing and Materials, West Conshohocken, PA, USA

  17. ASTM D (2009) Standard test method for effects of heat and air on asphaltic materials (thin-film oven test). American Society for Testing and Materials, West Conshohocken, PA, USA

  18. ASTM S (2009) Standard test method for density of semi-solid bituminous materials (pycnometer method). American Society for Testing and Materials, West Conshohocken, PA, USA

  19. ASTM D (2002) 92Standard test method for flash and fire points by Cleveland open cup. American Society for Testing and Materials, West Conshohocken, PA

    Google Scholar 

  20. Asli H, Ahmadinia E, Zargar M, Karim MR (2012) Investigation on physical properties of waste cooking oil–Rejuvenated bitumen binder. Constr Build Mater 37:398–405

    Article  Google Scholar 

  21. Shen J, Ohne Y (2002) Determining rejuvenator content for recycling reclaimed asphalt pavement by SHRP binder specifications. Int J Pavement Eng 3(4):261–268

    Article  Google Scholar 

  22. Zaumanis M, Mallick RB, Frank R (2014) Determining optimum rejuvenator dose for asphalt recycling based on Superpave performance grade specifications. Constr Build Mater 69:159–166

    Article  Google Scholar 

  23. Jia X, Huang B, Moore JA, Zhao S (2015) Influence of waste engine oil on asphalt mixtures containing reclaimed asphalt pavement. J Mater Civ Eng 27(12):04015042

    Article  Google Scholar 

  24. Siddiqui MN, Ali MF (1999) Studies on the aging behavior of the Arabian asphalts. Fuel 78(9):1005–1015

    Article  Google Scholar 

  25. Apeagyei AK (2011) Laboratory evaluation of antioxidants for asphalt binders. Constr Build Mater 25(1):47–53

    Article  Google Scholar 

  26. Sengoz B, Isikyakar G (2008) Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Constr Build Mater 22(9):1897–1905

    Article  Google Scholar 

  27. Standard AASHTO T315–10 (2011) 315–10 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR). American Association of State and Highway Transportation Officials: Washington DC, USA

  28. Masson JF, Leblond V, Margeson J (2006) Bitumen morphologies by phase-detection atomic force microscopy. J Microsc 221(1):17–29

    Article  MathSciNet  Google Scholar 

  29. De Moraes M, Pereira R, Simão R, Leite L (2010) High temperature AFM study of CAP 30/45 pen grade bitumen. J Microsc 239(1):46–53

    Article  Google Scholar 

  30. Fischer HR, Dillingh E, Hermse C (2014) On the microstructure of bituminous binders. Road Mater Pavement Des 15(1):1–15

    Article  Google Scholar 

  31. Ganter D, Mielke T, Maier M, Lupascu DC (2019) Bitumen rheology and the impact of rejuvenators. Constr Build Mater 222:414–423

    Article  Google Scholar 

  32. Rebelo LM, De Sousa J, Abreu A, Baroni M, Alencar A, Soares S, Mendes Filho J, Soares J (2014) Aging of asphaltic binders investigated with atomic force microscopy. Fuel 117:15–25

    Article  Google Scholar 

  33. Allen RG, Little DN, Bhasin A (2012) Structural characterization of micromechanical properties in asphalt using atomic force microscopy. J Mater Civ Eng 24(10):1317–1327

    Article  Google Scholar 

  34. Cavalli M, Partl M, Poulikakos L (2019) Effect of ageing on the microstructure of reclaimed asphalt binder with bio-based rejuvenators. Road Mater Pavement Des 20(7):1683–1694

    Article  Google Scholar 

  35. Ozdemir DK, Topal A, McNally T (2020) Relationship between microstructure and phase morphology of SBS modified bitumen with processing parameters studied using atomic force microscopy. Constr Build Materi 268:121061

    Article  Google Scholar 

  36. Ortega F, Roman C, Navarro F, García-Morales M, McNally T (2016) Physico-chemistry control of the linear viscoelastic behaviour of bitumen/montmorillonite/MDI ternary composites: effect of the modification sequence. Fuel Process Technol 143:195–203

    Article  Google Scholar 

  37. Soenen H, Besamusca J, Fischer HR, Poulikakos LD, Planche J-P, Das PK, Kringos N, Grenfell JR, Lu X, Chailleux E (2014) Laboratory investigation of bitumen based on round robin DSC and AFM tests. Mater Struct 47(7):1205–1220

    Article  Google Scholar 

Download references

Acknowledgements

This study prepared as a concise essay from the scope of the Doctor of Philosophy dissertation submitted to the Graduate School of Natural and Applied Sciences of Dokuz Eylul University.

Author information

Authors and Affiliations

  1. Dokuz Eylul University Graduate School of Natural and Applied Sciences, Buca, Izmir, Turkey

    Peyman Aghazadeh Dokandari

  2. Faculty of Engineering, Department of Civil Engineering, Dokuz Eylul University, 35160, Buca, Izmir, Turkey

    Ali Topal & Derya Kaya Ozdemir

Authors
  1. Peyman Aghazadeh Dokandari
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ali Topal
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Derya Kaya Ozdemir
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ali Topal.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Aghazadeh Dokandari, P., Topal, A. & Kaya Ozdemir, D. Rheological and Microstructural Investigation of the Effects of Rejuvenators on Reclaimed Asphalt Pavement Bitumen by DSR and AFM. Int J Civ Eng 19, 749–758 (2021). https://doi.org/10.1007/s40999-021-00605-z

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40999-021-00605-z

Keywords

Search

Navigation