Abstract
Strength and deformation modulus are two basic parameters in rock engineering designs. So far, many studies have been done on the effect of the water content on the foregoing two parameters all of which emphasize on the reduction of them by increase of water. In spite of performing many studies carried out in this field, two important questions have been remained unanswered: (1) Is there any degree of saturation in which the greatest variations in compressive strength and deformation modulus occur? (2) Does the saturation have more effect on the strength or on the deformation modulus? This matter has been discussed in this paper by conducting uniaxial compressive strength tests on 78 rock samples from 4 different lithologies in two dry and saturated conditions. The results showed that the compressive strength and the modulus of deformation have the highest losses in the saturation water content ranging between 0.2 and 2%, and the modulus of deformability decreases more than the compressive strength. In addition, the loss of compressive strength and deformation modulus is independent of the rock strength class proportionate to the saturation.
Similar content being viewed by others
References
AL-Bazali T (2013) The impact of water content and ionic diffusion on the uniaxial compressive strength of shale. Egypt J Pet 22(2):249–260. https://doi.org/10.1016/j.ejpe.2013.06.004
Baud P, Wenlu Z, Teng-fong W (2000) Failure mode and weakening effect of water on sandstone. J Geophys Res Solid Earth 105(B7):16371–16389
Brown ET (1981) Rock characterization, testing and monitoring—ISRM suggested methods. Pergamon, Oxford, pp 171–183
Cherblanc F, Berthonneau J, Bromblet P, Huon V (2016) Influence of water content on the mechanical behaviour of limestone: role of the clay minerals content. Rock Mech Rock Eng 49(6):2033–2042. https://doi.org/10.1007/s00603-015-0911-y
Daraei A, Zare S (2018a) Effect of water content variations on critical and failure strains of rock. KSCE J Civ Eng. https://doi.org/10.1007/s12205-018-0592-7
Daraei A, Zare S (2018b) Prediction of overbreak depth in Ghalaje road tunnel using strength factor. Int J Min Sci Technol. https://doi.org/10.1016/j.ijmst.2018.04.013
Erguler ZA, Ulusay R (2009) Water-induced variations in mechanical properties of clay-bearing rocks. Int J Rock Mech Min Sci 46(2):355–370. https://doi.org/10.1016/j.ijrmms.2008.07.002
Gilson Co., Available in https://www.globalgilson.com/250-series-concrete-compression-machine
Hawkins AB, McConnel BJ (1992) Sensitivity of sandstone strength and deformability to changes in moisture content. Q J Eng GeolHydrogeol 25:115–130. https://doi.org/10.1144/GSL.QJEG.1992.025.02.05
Hoek E, Diederichs MS (2006) Empirical estimation of rock mass modulus. Int J Rock Mech Min Sci 43(2):203–215. https://doi.org/10.1016/j.ijrmms.2005.06.005
Hoek E, Carranza-Torres CT, Corkum B (2002) Hoek- Brown failure criterion—2002 edition. In: Proc. NARMS-TAC conference, Toronto, Canada. pp 267–273
Karaman K, Cihangir F, Kesimal A (2015) A comparative assessment of rock mass deformation modulus. Int J Min Sci Technol 25(5):735–740. https://doi.org/10.1016/j.ijmst.2015.07.006
Kim E, Changani H (2016) Effect of water saturation and loading rate on the mechanical properties of Red and Buff Sandstones. Int J Rock Mech Min Sci 88:23–28. https://doi.org/10.1016/j.ijrmms.2016.07.005
Li D, Wong LAY, Liu G, Zhang X (2012) Influence of water content and anisotropy on the strength and deformability of low porosity meta-sedimentary rocks under triaxial compression. Eng Geol 126:46–66. https://doi.org/10.1016/j.enggeo.2011.12.009
Ozturk CA, Nasuf E, Kahraman S (2014) Estimation of rock strength from quantitative assessment of rock texture. J South Afr Inst Min Metall 114(6):471–480
Panthee S, Singh PK, Kainthola A, Das R, Singh TN (2018) Comparative study of the deformation modulus of rock mass. Bull Eng Geol Env 77(2):751–760. https://doi.org/10.1007/s10064-016-0974-3
Romana M, Vásárhelyi B (2007) A discussion on the decrease of unconfined compressive strength between saturated and dry rock samples. 11th ISRM Cong. Lisboa, Vol: I 1:39–142
Roy DG, Singh TN, Kodikara J, Das R (2017) Effect of water saturation on the fracture and mechanical properties of sedimentary rocks. Rock Mech Rock Eng 50:2585. https://doi.org/10.1007/s00603-017-1253-8
Shafiei Bafti S, Mohajjel M (2014) Structural evidence for slip partitioning and inclined dextral transpression along the SE Sanandaj-Sirjan zone, Iran. Int J Earth Sci (Geol Rundsch) 104(3):587–601. https://doi.org/10.1007/s00531-014-1106-6
Shakoor A, Barefield EH (2009) Relationship between unconfined compressive strength and degree of saturation for selected sandstones. Environ Eng Geosci 15(1):29–40. https://doi.org/10.2113/gseegeosci.15.1.29
Török A, Vásárhelyi B (2010) The influence of fabric and water content on selected rock mechanical parameters of travertine, examples from Hungary. Eng Geol 115(3–4):237–245. https://doi.org/10.1016/j.enggeo.2010.01.005
Vasarhelyi B (2005) Statistical analysis of the influence of water content on the strength of the Miocene limestone. Rock Mech Rock Eng 38:69–76. https://doi.org/10.1007/s00603-004-0034-3
Vásárhelyi B, Ván P (2006) Influence of water content on the strength of rock. Eng Geol 84(1–2):70–74. https://doi.org/10.1016/j.enggeo.2005.11.011
Wang SR, Hagan P, Li YC, Zhang CG, Liu XL (2017) Experimental study on deformation and strength characteristics of sandstone with different water contents. J Eng Sci Technol Rev 10(4):199–203. https://doi.org/10.25103/jestr.104.24
Wong L, Maruvanchery V, Liu G (2016) Water effects on rock strength and stiffness degradation. Acta Geotech 11(4):713. https://doi.org/10.1007/s11440-015-0407-7
Yilmaz I (2010) Influence of water content on the strength and deformability of gypsum. Int J Rock Mech Min Sci 47:342–347. https://doi.org/10.1016/j.ijrmms.2009.09.002
Zhang CH, Zhao QS (2014) Triaxial tests of effects of varied saturation and modulus for sandstone. Rock Soil Mech 35(4):951–958
Zhang D, Gamage RP, Perera MSA, Zhang C, Wanniarachchi WAM (2017) Influence of water saturation on the mechanical behaviour of low-permeability reservoir rocks. Energies 10(2):236. https://doi.org/10.3390/en10020236
Zhang H, Elsworth D, Wan Z (2018) Failure response of composite rock-coal samples. Geomech Geophys Geo-energy Geo-resour 4(2):175–192. https://doi.org/10.1007/s40948-018-0082-x
Zhou Z, Cai X, Cao W, Li X, Xiong C (2016a) Influence of water content on mechanical properties of rock in both saturation and drying processes. Rock Mech Rock Eng 49:3009–3025. https://doi.org/10.1007/s00603-016-0987-z
Zhou Z, Cai Z, Zhao Y, Chen L, Xiong C, Li X (2016b) Strength characteristics of dry and saturated rock at different strain rates. Trans Nonferrous Met Soc China 26(7):1919–1925. https://doi.org/10.1016/S1003-6326(16)64314-5
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Daraei, A., Zare, S. Determination of critical saturation degree in rocks based on maximum loss of uniaxial compression strength and deformation modulus. Geomech. Geophys. Geo-energ. Geo-resour. 4, 343–353 (2018). https://doi.org/10.1007/s40948-018-0091-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40948-018-0091-9