Abstract
This paper presents part of the results of an experimental campaign for the development of a strengthening technique, aimed at retrofitting old buildings by the application of exterior reinforcing render layers to their masonry walls. The experimental campaign comprised tests with out-of-plane loading on both strengthened and non-strengthened masonry walls. The strengthening layer material, hereby designated as CFRP (Carbon Fibre Reinforced Polymer) reinforcing render, is an innovative material for the seismic retrofitting of masonry walls. The reinforcing render material consists of a lime-based mortar reinforced with a carbon fibre mesh, applied on one or both facings of a masonry wall. This solution was developed to provide the masonry wall with improved mechanical properties, while respecting the main principles for a proper rehabilitation of old buildings.
Similar content being viewed by others
References
Lagomarsino S, Brencich A, Bussolino F, Moretti A, Pagnini L, Podestà S (1997) Una nuova metodologia per il rilievo del danno alle chiese: prime considerazioni sui meccanismi attivati dal sisma. Ingegneria Sismica; No. 3
Binda L, Gambarotta L, Lagomarsino S, Modena C (1999) A multilevel approach to the damage assessment and seismic improvement of masonry buildings in Italy. CRC press / Balkema; seismic damage to masonry buildings; Rotterdam, The Netherlands
Borri A, Avorio A, Cangi G (1999) Considerazioni sui cinematismi di collasso osservati per edifici in muratura. IX Convegno Nazionale “L’ingegneria Sismica in Italia”, ANIDIS; Turin, Italy
D’Ayala D (1999) Correlation of seismic vulnerability and damages between classes of buildings: churches and houses, in seismic damage to masonry buildings. CRC press / Balkema; seismic damage to masonry buildings; Rotterdam, The Netherlands
Giuffrè A (1993) Sicurezza e conservazione dei centri storici in area sismica, il caso Ortigia. Editora Laterza; Bari
Doglioni F, Moretti A, Petrini V (1994) Le chiese ed il terremoto. Editoriale Lint; Trieste
Binda L, Baronio G, Gambarotta L, Lagomarsino S, Modena C (1999) Masonry constructions in seismic areas of central Italy: a multi-level approach to conservation. VIII north American masonry conference - 8NAMC; Austin
D'Ayala D, Speranza E. (1999) Identificazione dei meccanismi di collasso per la stima della vulnerabilità sismica di edifici nei centri storici. IX Convegno Nazionale “L’ingegneria Sismica in Italia”, ANIDIS; Turin
Zuccaro G, Papa F. (2003) CD Multimediale MEDEA - Manuale di Esercitazioni sul Danno Ed Agibilità per edifici ordinari in muratura. Dipartimento Protezione Civile; Rome
Borri A, Cangi G (2004) Vulnerabilità ed interventi di prevenzione sismica nei centri storici umbri dell’alta Val Tiberina. XI Congresso Nazionale “L’ingegneria Sismica in Italia”, ANIDIS; Genoa
Doglioni F (1999) Codice di pratica (linee guida) per la progettazione degli interventi di riparazione, miglioramento sismico e restauro dei beni architettonici danneggiati dal terremoto umbro-marchigiano del 1997. Bollettino Ufficiale della Regione Marche
Costa A, Penna A, Arêde A, Costa A (2015) Simulation of masonry out-of-plane failure modes by multi-body dynamics. Earthq Eng Struct Dyn. https://doi.org/10.1002/eqe.2596
Ferreira T, Costa A, Arêde A, Varum H, Costa A (2016) In-situ out-of-plane testing of original and strengthened traditional stone masonry walls using airbags. J Earthq Eng 20:749–772. https://doi.org/10.1080/13632469.2015.1107662
Poletti E, Vasconcelos G, Jorge M (2015) Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls. Constr Build Mater 76:34–50. https://doi.org/10.1016/j.conbuildmat.2014.11.022
Ferreira J, Teixeira M, Dutu A, Branco F, Gonçalves M (2012) Experimental Evaluation and Numerical modelling of timber-framed walls. Exp Tech 38:45–53. https://doi.org/10.1111/j.1747-1567.2012.00820.x
Binda L, Anzani A, Cantini L, Cardani G, Tedeschi C, Saisi A (2006) On site and laboratory investigation on some churches hit by a recent earthquakes, in Order to assess the damages to materials and structures. I international conference on restoration of heritage masonry structures; Cairo
Avorio A, Borri A, De Maria A (2002) Sisma umbro-marchigiano del settembre 1997 e successivi a Sellano: comportamento di una schiera di edifici consolidati. Ingegneria Sismica 2:54–71
Drei A, Milani G, Sincraian G (2017) DEM numerical approach for masonry aqueducts in seismic zone: two valuable Portuguese examples. Int J Masonry Res Innov 1(2). https://doi.org/10.1504/IJMRI.2017.082392
Dutu A, Ferreira J, Sandu C (2013) Incremental seismic rehabilitation concept for Romanian civil buildings integrated in natural hazards prevention management. Int J Emerg Manag 9(3):248–257. https://doi.org/10.1504/IJEM.2013.058545
Ismail A, Ingham J (2016) In-plane and out-of-plane testing of unreinforced masonry walls strengthened using polymer textile reinforced mortar. Eng Struct 118:167–177. https://doi.org/10.1016/j.engstruct.2016.03.041
Guerreiro J, Proença M, Ferreira J, Gago A. (2017) Bonding and anchoring of a CFRP reinforced render for external strengthening of old masonry buildings. Construction and Building Materials. Under review
Colen I, Brito J, Branco F (2008) Situ adherence evaluation of coating materials. Exp Tech 33:51–60. https://doi.org/10.1111/j.1747-1567.2008.00372.x
Giaretton M, Dizhur D, Porto F, Ingham Z (2015) Constituent material properties of New Zealand unreinforced stone masonry buildings. J Building Eng 4:75–85. https://doi.org/10.1016/j.jobe.2015.08.005
Gago A, Proença A, Cardoso J, Cóias V, Paula R (2009) Seismic strengthening of stone masonry walls with glass fiber reinforced polymer strips and mechanical anchorages. Exp Tech 35:45–53. https://doi.org/10.1111/j.1747-1567.2009.00544.x
EN 12390:3. (2009) Testing hardened concrete; Part 3: Compressive strength of test specimens
EN 206:1. (2000) Concrete. Specification, performance, production and conformity
EN 12390:13. (2013) Testing hardened concrete. Part 13: Determination of secant modulus of elasticity in compression
ASTM E2126:05. (2005) Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
Gonçalves AM, Gomes-Ferreira J, Guerreiro L, Branco F (2014) Seismic retrofitting of timber framed walls. Mater Constr 64(316):e040. https://doi.org/10.3989/mc.2014.06913
Acknowledgements
The authors gratefully acknowledge STAP, S.A, promoter of the R&D project Rehab Toolbox, sponsored by FEDER through the POR Lisboa – QREN – Sistemas de Incentivos I&DT, for allowing the disclosure of the data presented in this paper.
The authors also gratefully acknowledge the participation of S&P, S.A in the same R&D project.
The authors would like to thank the Ministério da Ciência, Tecnologia e Ensino Superior (Ministry of Science, Technology and Higher Education), FCT, Portugal [grant number SFRH/BD/79339/2011].
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Guerreiro, J., Ferreira, J.G., Proença, J. et al. Strengthening of Old Masonry Walls for out-of-Plane Seismic Loading with a CFRP Reinforced Render. Exp Tech 42, 355–369 (2018). https://doi.org/10.1007/s40799-018-0239-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40799-018-0239-0