Lubricant flow in thin-film elastohydrodynamic contact under extreme conditions
- 322 Downloads
To further extend knowledge about fluid film friction in elastohydrodynamic contact, it is important to examine how lubricant flows. In this paper, several film thickness results obtained by interferometry technique for different kinds of experiments were analyzed and discussed based on lubricant flow continuity. Results of two steady-state and two transient experiments are presented. Possible speed profiles that can explain observed film thickness distributions were suggested. It is shown that major part of present experiments can be explained by a single speed profile known as a plug flow. This finding is in contradiction to usual linear speed profile predicted by Reynolds equation.
Keywordsfluid film friction speed profile flow rate continuity lubricant rheology plug flow
The research leading to these results has received funding from the Ministry of Education, Youth and Sports of Czech Republic under the National Sustainability Program I (Project LO1202).
- Bair S, Winer W O, Distin K W. Experimental investigations into shear localization in an operating EHD contact. In Tribology Series, Proc. 19th Leeds-Lyon Symposium on Tribology, Leeds, UK, 1993: 383–388.Google Scholar
- Kaneta M. For the establishment of a new EHL theory. In Tribology Series, Proc. 25th Leeds-Lyon Symposium on Tribology, Lyon, France, 1999: 25–36.Google Scholar
Open Access: The research leading to these results has received funding from the Ministry of Education, Youth and Sports of Czech Republic under the National Sustainability Program I (Project LO1202).