Abstract
With the increasingly complex business environment, supply chain managers are required to mitigate both upstream (supply-side) and downstream (demand-side) barriers in order to remain competitive. Failure to address both supply- and demand-side barriers carries far reaching consequences which can have a significant impact on the performance of the whole supply chain. While a substantial number of studies have been undertaken on supply chain barriers to performance, research on prioritizing supply-side barriers to select best mitigation strategies is rare, especially in the context of sourcing from low-cost countries. Hence, the objective of this research is to identify the supply-side barriers and the corresponding mitigation strategies in the context of the apparel industry in Bangladesh by applying an analytical hierarchy process and quality function deployment method. This study finds that long lead time, interruption in utility supply as well as on-time supply problems are the most prioritized supply-side barriers. In order to address these barriers, the most important strategies are efficiency in planning, quick response and commitment for meeting on-time delivery. The implications of findings of the research are also discussed.
Similar content being viewed by others
References
Ahmed, N., & Peerlings, J. H. M. (2009). Addressing workers’ rights in the textile and apparel industries: Consequences for the Bangladesh economy. World Development, 37(3), 661–675.
Akao, Y. (1990). Quality function deployment (QFD): Integrating customer requirements into product design. Cambridge, MA: Productivity Press.
Bevilacqua, M., Ciarapica, F. E., et al. (2006). A fuzzy-QFD approach to supplier selection. Journal of Purchasing and Supply Management, 12(1), 14–27.
BGMEA. (2012). Bangladesh apparel and textiles exposition. Bangladesg Garment Manufacturer Exporters Association. Accessed April 04, 2013 from http://www.bgmea.com.bd/batexpo/index.htm.
Blackhurst, J., Craighead, C. W., et al. (2005). An empirically derived agenda of critical research issues for managing supply-chain disruptions. International Journal of Production Research, 43(19), 4067–4081.
Bottani, E., & Rizzi, A. (2006). Strategic management of logistics service: A fuzzy QFD approach. International Journal of Production Economics, 103(2), 585–599.
Bruce, M., Daly, L., & Towers, N. (2004). Lean or agile: A solution for supply chain management in the textiles and clothing industry? International Journal of Operations and Production Management, 24(2), 151–170.
Buxey, G. (2005). Globalisation and manufacturing strategy in the TCF industry. International Journal of Operations and Production Management, 25(2), 100–113.
Cao, N., Zhang, Z., To, M. K., & Keng, P. (2008). How are supply chains coordinated? An empirical observation in textile-apparel businesses. Journal of Fashion Marketing and Management, 12(3), 384–397.
Chowdhury, M. H., Dewan, M. N. A., & Quaddus, M. A. (2012). Supply chain resilience to mitigate disruptions: A QFD approach. In The 16th Pacific Asia conference on information systems (PACIS 2012), Ho Chi Minh City, Vietnam (pp. 11–15).
Chowdhury, M. M. H., & Quaddus, M. (2015). A multiple objective optimization based QFD approach for efficient resilient strategies to mitigate supply chain vulnerabilities: The case of garment industry of Bangladesh. Omega, 57, 5–21.
Chowdhury, M. M. H., & Quaddus, M. (2016). Supply chain readiness, response and recovery for resilience. Supply Chain Management an International Journal, 21(6), 709–731.
Chowdhury, M. M. H., & Quaddus, M. (2017). Supply chain resilience: Conceptualization and scale development using dynamic capability theory. International Journal of Production Economics, 188, 185–204.
Christopher, M., & Lee, H. (2004). Mitigating supply chain risk through improved confidence. International Journal of Physical Distribution and Logistics Management, 34(5), 388.
Dauvergne, Peter, & Lister, J. (2012). Big brand sustainability: Governance prospects and environmental limits. Global Environmental Change, 22(1), 36–45.
de Brito, P., Valentina, C., & Corinne, B. M. (2008). Towards a sustainable fashion retail supply chain in Europe: Organisation and performance. International Journal of Production Economics, 114(2), 534–553.
Ferdousi, F., & Ahmed, A. (2009). An investigation of manufacturing performance improvement through lean production: A study on Bangladeshi garment firms. International Journal of Business and Management, 4(9), 106–116.
Fibre2fashion News Desk. 2013. US suspends GSP facility to Bangladesh. Accessed April 06, 2013 from http://www.fibre2fashion.com/news/apparel-news/newsdetails.aspx?news_id=147897.
González, M. E., Quesada, G., et al. (2004). Customer satisfaction using QFD: An e-banking case. Managing Service Quality, 14(4), 317–330.
Gunasekaran, A., Hong, P., & Fujimoto, T. (2014). Building supply chain system capabilities in the age of global complexity: Emerging theories and practices. Editorial International Journal of Production Economics, 147, 189–197.
Habib, M. R. I. (2009). Backward linkages in readymade garment industry of Bangladesh: Appraisal and policy implications. Journal of Textile and Apparel Technology and Management, 6(2), 1–10.
Haider, M. Z. (2007). Competitiveness of the Bangladesh ready-made garment industry in major international markets. Asia Pacific Trade and Investment Review, 3(1), 3–27.
Halder, S. J., & Kim, W. (2012). A developed system for business management. Business Economics Finanacial Sciences and Management Advances in Intelligent and Soft Computing, 143, 277–284.
Hendricks, K. B., & Singhal, V. R. (2005). An empirical analysis of the effect of supply chain disruptions on long-run stock price performance and equity risk of the firm. Production and Operations Management, 14(1), 35–52.
Hossan, C. G., Sarker, M. A. R., & Afroze, R. (2012). Recent unrest in the RMG sector of Bangladesh: Is this an outcome of poor labour practices? International Journal of Business and Management, 7, 206–218.
Huang, L.-S., Quaddus, M., et al. (2011). An investigation into the factors affecting knowledge management adoption and practice in the life insurance business. Knowledge Management Research and Practical, 9(1), 58–72.
Ila, M., & John, T. M. (2008). Global supply chain risk management strategies. International Journal of Physical Distribution and Logistics Management, 38(3), 192–223.
Islam, M. A., Begum, M. N., & Rashed, C. A. A. (2012). Operational disturbances and their impact on the manufacturing business-an empirical study in the RMG sector of Bangladesh. International Journal of Research in Management and Technology, 2(2), 184–191.
Islam, M. A., & Deegan, C. (2008). Motivations for an organisation within a developing country to report social responsibility information: Evidence from Bangladesh. Accounting Auditing and Accountability Journal, 21(6), 850–874.
Jin, B. (2004). Apparel industry in East Asian newly industrialized countries: Competitive advantage, challenge and implications. Journal of Fashion Marketing and Management, 8(2), 230–244.
Joarder, M. A. M., Hossain, A. K. M. N., & Hakim, M. M. (2010). Post-MFA performance of Bangladesh apparel sector. International Review of Business Research Papers, 6(4), 134–144.
Jüttner, U. (2005). Supply chain risk management: Understanding the business requirements from a practitioner perspective. International Journal of Logistics Management, 16(1), 120–141.
Jüttner, U., & Maklan, S. (2011). Supply chain resilience in the global financial crisis: An empirical study. Supply Chain Management an International Journal, 16(4), 246–259.
Khandker, A. (2010). Trends in the growth rate of RMG exports of Bangladesh—an analysis of the trends with special emphasis on the RMG exports of Bangladesh to the US market. AIUB Journal of Business and Economics, 10(1), 90–107.
Mason-Jones, R., & Towill, D. R. (1999). Total cycle time compression and the agile supply chain. International Journal of Production Economics, 62(1), 61–73.
Moon, K. K. L., Yi, C. Y., & Ngai, E. W. T. (2012). An instrument for measuring supply chain flexibility for the textile and clothing companies. European Journal of Operational Research, 222(2), 191–203.
Naeem, M. Asghar, & Welford, R. (2009). A comparative study of corporate social responsibility in Bangladesh and Pakistan. Corporate Social Responsibility and Environmental Management, 16(2), 108–122.
Nejatian, M., & Zarei, M. H. (2013). Moving towards organizational agility: Are we improving in the right direction? Global Journal of Flexible Systems Management, 14(4), 241–253.
Nuruzzaman, A. H. (2009). Lead time management in the garment sector of Bangladesh: An avenues for survival and growth. European Journal of Scientific Research, 33(4), 617–629.
Nuruzzaman, A. H., & Azad, R. (2010). Is Bangladeshi RMG sector fit in the global apparel business? Analyses the supply chain management. The South East Asian Journal of Management, 4(1), 53–72.
Nuruzzaman, M. (2001). Global market challenges and opportunities for the readymade garments industry of Bangladesh—an appraisal of impacts and future requirements. Rajshahi University Studies (Part-C), 9, 119–126.
Nuruzzaman, M. (2007). Developing export of RMG products in Bangladesh: Analysisng the lead time. Management Trends, 4(1), 1–9.
Nuruzzaman, M. (2008). Lead time reduction and the application of process management—a study on selected RMG units in Bangladesh. Journal of Business Research, 10, 63–74.
Nuruzzaman, M. (2015). Improving Competitiveness in Manufacturing-Wholesaling-Retailing Supply Chains. In Sustaining competitive advantage via business intelligence, knowledge management, and system dynamics (pp. 221–457). Emerald Group Publishing Limited.
Pal, R., Torstensson, H., & Mattila, H. (2014). Antecedents of organizational resilience in economic crises: an empirical study of Swedish textile and clothing SMEs. International Journal of Production Economics, 147, 410–428.
Park, T., & Kim, K. J. (1998). Determination of an optimal set of design requirements using house of quality. Journal of Operations Management, 16(5), 569–581.
Pettit, T. J., Fiksel, J., et al. (2010). Ensuring supply chain resilience: Development of a conceptual framework. Journal of Business Logistics, 31(1), 1–21.
Ponomarov, S. Y., & Holcomb, M. C. (2009). Understanding the concept of supply chain resilience. International Journal of Logistics Management, 20(1), 124–143.
Quddus, M. (2001). Bureaucratic corruption and business ethics: The case of the garment exports from Bangladesh. Journal of Bangladesh Studies, 3(1), 16–24.
Quddus, M., & Rashid, S. (1999). Garment exports from Bangladesh: An update and evaluation. Journal of International Business Studies, 1(1), 28–38.
Saaty, T. L. (1980). AHP: The analytic hierarchy process. New York: McGraw-Hill.
Singh, R. K., & Acharya, P. (2013). Supply chain flexibility: A frame work of research dimensions. Global Journal of Flexible Systems Management, 14(3), 157–166.
Wagner, S. M., & Bode, C. (2006). An empirical investigation into supply chain vulnerability. Journal of Purchasing and Supply Management, 12(6), 301–312.
Wernerfelt, B. (1984). A resource-based view of the firm. Strategic Management Journal, 5, 171–180.
Zhao, X., Huo, B., et al. (2008). The impact of power and relationship commitment on the integration between manufacturers and customers in a supply chain. Journal of Operations Management, 26(3), 368–388.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chowdhury, M.M.H., Umme, N.J. & Nuruzzaman, M. Strategies for Mitigating Supply-Side Barriers in the Apparel Supply Chain: A Study on the Apparel Industry of Bangladesh. Glob J Flex Syst Manag 19 (Suppl 1), 41–52 (2018). https://doi.org/10.1007/s40171-017-0180-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40171-017-0180-6