Abstract
The present attempt in this project is to reduce the vibrations, temperature due to friction, noise and weight of I C engine valve guide by replacing conventional metal valve guide with composite valve guide. Composite materials have been used in automotive components because of their properties such as low weight, high specific stiffness, corrosion resistance, ability to produce complex shapes, high specific strength and good impact energy absorption etc. The Internal combustion engine valve guides are the parts that support the valves in the cylinder head, besides this it keeps lubricating oil from getting sucked into the combustion chamber past the intake valve stem, it keeps exhaust gases from getting into the crankcase past the exhaust valve stem and it also keeps the valve face in perfect alignment with the valve seat. A valve guide test rig is indigenously fabricated. Valve guides are manufactured using the developed composite material (Resin ARL-136, Hardener AH-126 and 4 vol% WS2), on a CNC lathe. The performance of the developed composite guide under varied conditions of speeds, that is, fixed change in rpm and modulated changes in rpm is assessed. Noise, temperature and vibrations are measured. The experimental data revealed that contribution of composite guide in respect of acceleration, velocity and displacement components of vibration is not substantial. A substantial reduction in noise levels is seen. As far as temperature rise due to friction is concerned maximum components fail at elevated temperatures, with composite guides the temperature generated due to friction at higher speeds is less, a considerable weight reduction is also observed.
Similar content being viewed by others
References
D. Parshuram, S. Mangsetty, Design and analysis of composites/hybrid drive shaft for automotives. IJES 2, 160–171 (2013)
M. Kawakame, J.D. Bressan, Study of wear in self-lubricating composites for application in seals of electric motors. J. Mater. Technol. 179, 74–80 (2006)
M.J. Hodgin, R.H. Estes, Advanced boron nitride epoxy formulations excel in thermal management applications, Nepcon West 1999 conference, Feb 23–25th, pp 359–366, Anaheim, CA
P.V. Vasconcelos, F.J. Lino, R.J. Neto, R. Paiva, Design epoxy resins based composites for rapid tooling applications. 5th International conference on mechanics and materials in design, chapter 10
G.C. Jacob, J.M. Starbuck, J.F. Fellers, S. Simunovic, R.G. Boeman, Strain rate effects on the mechanical properties of polymer composite materials. J. Appl. Polym. Sci. (2004). https://doi.org/10.1002/app.20901.
A. Khamlichi, M. Bezzazi, A. Jabbouri, P. Reis, J.P. Davim, Optimizing friction behavior of clutch facings using Pin-on-disc test. Int. J. Phys. Sci. 3(2), 65–70 (2008)
D. Chan, G.W. Stachowiak, Review of Automotive brake friction materials. Proc. Inst. Mech. Eng. 218(Part D), 953–966 (2004)
A. Ganguly, R. George, Asbestos free friction composition for brake linings. Bull. Mater. Sci. 31(1), 19–22 (2008)
D. Marsella, R.S. Williams, Polymer Bearings for Today’s Automotive Applications (Sovereign Publications Limited, Automotive Purchasing International, Manta, 2005)
G E Oil & Gas, Nuovo Pignone S.P.A. Pumps, Valves and System Headquaters, 70123, Bari, Italy
J.S. Sidhu, G.S. Lathkar, S.B. Sharma, Mechanical properties of micro tungsten disulphide particles filled epoxy composite and it’s resistance against sliding wear. Malayas. Polym. J. 9(1), 24–32 (2014)
W.H. Crouse, D.L. Anglin, Automotive Engines (Tata Mc Graw Hill, New York, 1985)
K. Singh, Automobile Engineering, vol. 1, 2, 12th edn. (Standard Publishers Distributors, Delhi, 2009)
P.S. Gill, Automobile Engineering, vol. 1, 2, 2nd edn. (S K Kataria and Sons, Delhi, 2012)
M K Impex Canada, Tungsten Disulphide, 6382 Lisgar Drive, Mississauga, Ontario L5N6X1, Canada
M.S.Bhatnagar, in Epoxy Resins (Overview). The Polymeric Materials Encyclopedia, 1996, CRC Press
Understanding Epoxy, Industrial Formulators, 3824, William Street, Burnaby, BC, Canada, V5c3H9 (2000)
M. Singla, V. Chawla, Mechanical properties of epoxy resin—fly ash composite. JMMCE 9(3), 199–210 (2010)
B. Suresha, G. ChandraMohan, P.R. Sadananda Rao, P. Sampathkumarau, S. Seetharumu, V. Venkateswarlu, Friction and slide wear characteristics of glass epoxy and glass-epoxy filled SiCp composites. Indian J. Eng. Mater. Sci. 13, 535–541 (2006)
M.S. Bhagyashekar, R. Rao, Effect of material and test parameters on the wear behavior of particulate filled composites Part I. J. Reinf. Plast. Compos. 26(17), 1753–1768 (2007)
D. Lingaraju, K. Ramji, M. Pramila, U. Deviand, R. Lakshmi, Mechanical and tribological studies of polymer hybrid nano-composites with nano reinforcements. Bull. Mater. Sci. 34(4), 705–712 (2011)
L.C. Zhang, I. Zarudi, K.Q. Xiao, Novel behavior of friction and wear of Epoxy Composites Reinforced by carbon nanotubes. Wear 261, 806–811 (2006)
Vasile Bria et.al, Mechanical Properties of filled Epoxy Based Reinforced Composites‖, Technologies in Machine Building, ISSN 1221–4566, (2009)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sidhu, J.S., Lathkar, G.S. & Sharma, S.B. Design of Epoxy based Resin Composites for Automotive Applications: A Case Study on IC Engine Valve Guide. J. Inst. Eng. India Ser. C 100, 283–288 (2019). https://doi.org/10.1007/s40032-017-0439-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40032-017-0439-x