References
Grunwald, C.; Vallée, T.; Fecht, S.; Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Scholz, R.; Walther, F.: Rods glued in engineered hardwood products part I: Experimental results under quasi-static loading. International Journal of Adhesion and Adhesives, 2018, in press. Doi: https://doi.org/10.1016/j.ijadhadh.2018.05.003
Tlustochowicz, G.; Serrano, E.; Steiger, R.: State-of-the-art review on timber connections with glued-in steel rods. Mechanics of Structures and Materials, 44 (5), 2011, 997–1020
Stepinac, M.; Rajčić, V.; Hunger, F.; van de Kuilen, J.W.G.: Glued-in rods in beech laminated veneer lumber. European Journal of Wood and Wood Products 74 (3), 2016, 463–6. Doi: https://doi.org/10.1007/s00107-016-1037-y.
Grunwald, C.; Vallée, T.; Fecht, S.; Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L.; Myslicki, S.; Scholz, R.; Walther, F.: Rods glued in engineered hardwood products part II: Numerical modelling and capacity prediction. International Journal of Adhesion and Adhesives, 2018, in press. Doi: https://doi.org/10.1016/j.ijadhadh.2018.05.003
Stepinac, M.; Hunger, F.; Tomasi, R.; Serrano, E.; Rajcic, V.; van de Kuilen, J.W.G.: Comparison of design rules for glued-in rods and design rule proposal for implementation in European standards: Working Commission W18 - Timber Structures. CIB-W18/46-7-10. Karlsruhe: Timber Scientific Publishing (2013)
Acknowledgments and outlook
The research project TACITUS (18266 N) was supported by research agency iVTH (Internationaler Verein für Technische Holzfragen e. V.) and funded by the Federal Ministry of Economics and Energy (BMWi) through the AiF within the framework of the programme for the promotion of joint industrial research (IGF) on the basis of a decision of the German Bundestag, which the authors want to acknowledge. Similarly, the authors want to acknowledge the significant material and intellectual contribution of the cooperation partners involved and the members of the industrial committee accompanying the project for their excellent cooperation. The final report with all results can be obtained from the iVTH. In the meantime, inquiries can also be made to the research centres (project coordination: Oliver Bletz-Mühldorfer). A follow-up project, TACITUS FAQs 2018, is currently being initiated, in which the long-term behaviour of engineered hardwood GiR subjected to environmental loading is focused.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bletz-Mühldorfer, O., Diehl, F., Bathon, L. et al. Load-Bearing Behaviour of Rods Glued in Hardwood . Adhes Adhes Sealants 15, 10–15 (2018). https://doi.org/10.1007/s35784-018-0025-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s35784-018-0025-5