Correlation Between Hardness and Loading Transformation Stress of Superelastic NiTi

  • Mohammad J. Mahtabi
  • Aref Yadollahi
  • Monireh Rahmati
  • Tonya W. Stone
Technical Note - Mechanical Engineering
  • 11 Downloads

Abstract

The relationship between the microhardness and the loading transformation stress of superelastic NiTi is investigated at room temperature. Superelastic NiTi shows a loading stress plateau under mechanical loading due to austenite-to-martensite microstructural phase transformation. The stress level at which the transformation from austenite to martensite occurs is a key mechanical property that dominates the design of several mechanical and biomedical components. Experiments in this study indicate a direct relationship between the loading transformation stress of superelastic NiTi and the value of Vickers hardness for this material. Regression analysis was conducted to investigate the correlation between the microhardness values and loading transformation stress of superelastic NiTi and determine the appropriate form of relation between these two mechanical properties. Based on the analyses, a linear relation was found to appropriately represent the relationship between the microhardness and loading transformation stress.

Keywords

Nitinol Shape memory alloy Microhardness Mechanical behavior Transformation stress 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

Authors would like to acknowledge the support of Center for Advanced Vehicular Systems (CAVS) at Mississippi State University.

References

  1. 1.
    Otsuka, K.; Wayman, C.M.: Shape Memory Materials. Cambridge University Press, Cambridge (1999)Google Scholar
  2. 2.
    Mohd Jani, J.; Leary, M.; Subic, A.; Gibson, M.A.: A review of shape memory alloy research, applications and opportunities. Mater. Des. 56, 1078–1113 (2014).  https://doi.org/10.1016/j.matdes.2013.11.084 CrossRefGoogle Scholar
  3. 3.
    Kaya, A.; Kaya, I.; Karaca, H.E.: U-shape slot antenna design with high-strength \(\text{ Ni }_{54}\text{ Ti }_{46}\) alloy. Arab. J. Sci. Eng. 41(9), 3297–3307 (2016).  https://doi.org/10.1007/s13369-015-1819-2 CrossRefGoogle Scholar
  4. 4.
    Pelton, A.R.; Dicello, J.; Miyazaki, S.: Optimisation of processing and properties of medical grade Nitinol wire. Minim. Invasive Ther. Allied Technol. 9, 107–118 (2000).  https://doi.org/10.3109/13645700009063057 CrossRefGoogle Scholar
  5. 5.
    Bucsek, A.N.; Paranjape, H.M.; Stebner, A.P.: Myths and truths of Nitinol mechanics: elasticity and tension-compression asymmetry. Shap. Mem. Superelasticity 2, 264–271 (2016).  https://doi.org/10.1007/s40830-016-0074-z CrossRefGoogle Scholar
  6. 6.
    Mahtabi, M.J.; Shamsaei, N.; Rutherford, B.: Mean strain effects on the fatigue behavior of superelastic Nitinol alloys: an experimental investigation. Procedia Eng. 133, 646–654 (2015).  https://doi.org/10.1016/j.proeng.2015.12.645 CrossRefGoogle Scholar
  7. 7.
    Mahtabi, M.J.; Shamsaei, N.; Mitchell, M.R.: Fatigue of Nitinol: the state-of-the-art and ongoing challenges. J. Mech. Behav. Biomed. Mater. 50, 228–254 (2015).  https://doi.org/10.1016/j.jmbbm.2015.06.010 CrossRefGoogle Scholar
  8. 8.
    Mahtabi, M.J.; Shamsaei, N.: Fatigue modeling for superelastic NiTi considering cyclic deformation and load ratio effects. Shap. Mem. Superelasticity 3, 250–263 (2017).  https://doi.org/10.1007/s40830-017-0115-2 CrossRefGoogle Scholar
  9. 9.
    Gall, K.; Juntunen, K.; Maier, H.J.; Sehitoglu, H.; Chumlyakov, Y.I.: Instrumented micro-indentation of NiTi shape-memory alloys. Acta Mater. 49, 3205–3217 (2001).  https://doi.org/10.1016/S1359-6454(01)00223-3 CrossRefGoogle Scholar
  10. 10.
    Pfetzing-Micklich, J.; Somsen, C.; Dlouhy, A.; Begau, C.; Hartmaier, A.; Wagner, M.F.-X.; Eggeler, G.: On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi. Acta Mater. 61(2), 602–616 (2013).  https://doi.org/10.1016/j.actamat.2012.09.081 CrossRefGoogle Scholar
  11. 11.
    Yan, W.; Sun, Q.; Liu, H.-Y.: Spherical indentation hardness of shape memory alloys. Mater. Sci. Eng. A 425(1–2), 278–285 (2006).  https://doi.org/10.1016/j.msea.2006.03.046 CrossRefGoogle Scholar
  12. 12.
    Yan, W.; Sun, Q.; Feng, X.-Q.; Qian, L.: Analysis of spherical indentation of superelastic shape memory alloys. Int. J. Solids Struct. 44(1), 1–17 (2007).  https://doi.org/10.1016/j.ijsolstr.2006.04.007 CrossRefMATHGoogle Scholar
  13. 13.
    Amini, A.; Cheng, C.: Nature of hardness evolution in nanocrystalline NiTi shape memory alloys during solid-state phase transition. Sci. Rep. 3, 2476 (2013).  https://doi.org/10.1038/srep02476 CrossRefGoogle Scholar
  14. 14.
    ASTM E606-/E606M-12: Test Method for Strain-Controlled Fatigue Testing. ASTM International, West Conshohocken (2012)Google Scholar
  15. 15.
    ASTM F2516-14: Standard Test Method for Tension Testing of Nickel–Titanium Superelastic Materials. ASTM International, West Conshohocken (2014)Google Scholar
  16. 16.
    Dieter, G.E.: Mechanical Metallurgy, 3rd edn. McGraw-Hill, New York (1986)Google Scholar
  17. 17.
    Aksöz, S.: Microstructural and mechanical investigation of NiTi intermetallics produced by hot deformation technique. Arab. J. Sci. Eng. 42(6), 2573–2581 (2017).  https://doi.org/10.1007/s13369-017-2567-2 CrossRefGoogle Scholar
  18. 18.
    Brockhurst, P.; Hsu, E.: Hardness and strength of endodontic instruments made from NiTi alloy. Aust. Endod. J. 24, 115–119 (1998).  https://doi.org/10.1111/j.1747-4477.1998.tb00034.x CrossRefGoogle Scholar

Copyright information

© King Fahd University of Petroleum & Minerals 2018

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringMississippi State UniversityMississippi StateUSA
  2. 2.Dynamic and Smart Systems Laboratory, Mechanical, Industrial and Manufacturing Engineering DepartmentThe University of ToledoToledoUSA
  3. 3.Center for Advanced Vehicular SystemsMississippi State UniversityMississippi StateUSA
  4. 4.Mechanical, Industrial and Manufacturing Engineering DepartmentThe University of ToledoToledoUnited States

Personalised recommendations