Avoid common mistakes on your manuscript.
Correction to: Journal of Remanufacturing
This article was initially published with incorrect copyright information.
Upon publication of this Correction, the copyright of this article changed to “The Author(s)”.
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/10.1007/s13243-018-0063-9
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Foster, J., Cullen, C., Fitzpatrick, S. et al. Correction to: Remanufacture of hot forging tools and dies using laser metal deposition with powder and a hard-facing alloy Stellite 21®. Jnl Remanufactur 9, 205 (2019). https://doi.org/10.1007/s13243-019-00072-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13243-019-00072-9