Abstract
Copolyamic acid (coPAA) based on 4,4′-oxydianiline (ODA), p-phenylenediamine (PDA) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) was synthesized in N,N-dimethylformamide (DMF). The preparation of continuous defect-free nanofibers from BPDA-PDA/ODA coPAA was achieved by electrospinning of its DMF solution. The average fiber diameter significantly increased from 385 to 590 nm on increasing the total polymer concentration of the spinning solutions from 5 to 7 wt%. The addition of dodecylethyldimethylammonium bromide (DEDAB) salt to the spinning solution resulted in the procurement of coPAA nanofibers with a much smaller (more than 3 times) average diameter. The coPAA imidization process was investigated through FTIR spectroscopy. The chemical composition and morphology of coPI nanofibers were assessed by X-ray photoelectron spectroscopy and scanning electron microscopy. Imidization under isothermal conditions proceeded faster in the first stage. Activation energies in the first and second imidization stages were similar when DEDAB had been added into the electrospinning solution. Cylindrical or crimped defect-free nanofibers of BPDA-PDA/ODA copolyimide (coPI) were obtained by the stepped thermal imidization of coPAA. The morphology of coPI nanofibers depends on the curing temperature. The crimped coPI nanofibers were most probably due to the relief of residual stress when the curing temperature was higher than the polymer glass transition temperature.
Similar content being viewed by others
References
Z. -M. Huang, Y.-Z. Zhang, M. Kotaki, and S. Ramakrishna, Composites Sci. Techn., 63, 2223 (2003).
P. Supaphol, O. Suwantong, P. Sangsanoh, S. Srinivasan, R. Jayakumar, and S. V. Nair, Adv. Polym. Sci., 246, 213 (2012).
V. Thavasi, G. Singh, and S. Ramakrisha, Energy Environ. Sci., 1, 205 (2008).
P. Zahedi, I. Rezaeian, S. O. Ranaei-Siadat, S. H. Jafari, and P. Supaphol, Polym. Adv. Technol., 21, 77 (2010).
D. Paneva, M. Ignatova, N. Manolova, and I. Rashkov, in Nanofibers: Fabrication, Performance, and Applications, W. N. Chang, Ed., Nova Science Publishers, New York, 2009, pp 73–151.
D. Paneva, R. Mincheva, E. Yancheva, N. Manolova, O. Stoilova, Ph. Dubois, and I. Rashkov, in Chitosan: Manufacture, Properties, and Usage, S. P. Davis, Ed., Nova Science Publishers, Inc., New York, 2011, pp 261–320.
M. Ignatova, O. Stoilova, N. Manolova, D. G. Mita, N. Diano, C. Nicolucci, and I. Rashkov, Eur. Polym. J., 45, 2494 (2009).
M. Ignatova, N. Manolova, N. Markova, and I. Rashkov, Macromol. Biosci., 9, 102 (2009).
P. M. Hergenrother, K. A. Watson, J. G. Smith, J. W. Connell, and R. Yokota, Polymer, 43, 5077 (2002).
H. Inoue, Y. Sasaki, and T. Ogawa, J. Appl. Polym. Sci., 62, 2303 (1996).
E. Mazoniene, J. Bendoraitiene, L. Peciulyte, A. Zemaitaitis, and S. Diliunas, Progress. Solid State Chem., 34, 201 (2006).
C. Huang, S. Chen, D. H. Reneker, C. Lai, and H. Hou, Adv. Mater., 18, 668 (2006).
F. Chen, X. Peng, T. Li, S. Chen, X. F. Wu, D. H. Reneker, and H. Hou, J. Phys. Appl. Phys., 41, 1810 (2008).
S. Chen, P. Hu, A. Greiner, C. Cheng, H. Cheng, F. Chen, and H. Hou, Nanotechnology, 19, 1 (2008).
C. Huang, S. Wang, H. Zhang, T. Li, S. Chen, C. Lai, and H. Hou, Eur. Polym. J., 42, 1099 (2006).
C. Cheng, J. Chen, F. Chen, P. Hu, X. F. Wu, D. H. Reneker, and H. Hou, J. Appl. Polym. Sci., 116, 1581 (2010).
A. V. Goponenko, H. Hou, and Y. A. Dzenis, Polymer, 52, 3776 (2011).
G. X. Xie, J. Electr. Insul. Mater., 5, 26 (1992).
Y. -K. Xu, M.-S. Zhan, and K. Wang, J. Polym. Sci. Part B: Polym. Phys., 42, 2490 (2004).
Y. Seo, S. M. Lee, D. Y. Kim, and K. U. Kim, Macromolecules, 30, 3747 (1997).
M. Spasova, R. Mincheva, D. Paneva, N. Manolova, and I. Rashkov, J. Bioact. Compat. Polym., 21, 465 2006).
W. S. Rasband, ImageJ, U.S. National Institute of Health, Bethesda, 1997–2006, http://rsb.info.nih.gov/ij/.
J. Zeng, H. Hou, V. J. H. Wendor, and A. Greiner, e-Polymers, Article No., 038 (2005).
J. Zeng, H. Hou, A. Schaper, V. J. H. Wendor, and A. Greiner, e-Polymers, Article No., 009 (2003).
M. Ignatova, N. Manolova, and I. Rashkov, Eur. Polym J., 43, 1112 (2007).
M. Ignatova, K. Starbova, N. Markova, N. Manolova, and I. Rashkov, Carbohydr. Res., 341, 2098 (2006).
C. K. Lee, S. I. Kim, and S. J. Kim, Synth. Met., 154, 209 (2005).
R. Mincheva, D. Paneva, N. Manolova, and I. Rashkov, J. Bioact. Compat. Polym., 20, 419 (2005).
M. Spasova, N. Manolova, D. Paneva, and I. Rashkov, e-Polymers, Article No., 056 (2004).
M. I. Bessonov, M. M. Koton, V. V. Kudryavtsev, and L. A. Laius, in Polyimides-Thermally Stable Polymers, Consultants Bureau, New York, 1987, p 318.
M. J. Brekner and C. Feger, J. Polym. Sci. Part A. Polym. Chem., 25, 2005 (1987).
D. C. Surrao, J. W. Hayami, S. D. Waldman, and B. G. Amsden, Biomacromolecules, 11, 3624 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
The image from this article is used as the cover image of Volume 21, Issue 4.
Rights and permissions
About this article
Cite this article
Peciulyte, L., Rutkaite, R., Zemaitaitis, A. et al. Thermal imidization peculiarities of electrospun BPDA-PDA/ODA copolyamic acid nanofibers. Macromol. Res. 21, 419–426 (2013). https://doi.org/10.1007/s13233-013-1032-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13233-013-1032-7