Skip to main content
Log in

Microstructural Characterisation of Ti Containing Fe-7Al-0.35C Based Low-Density Steel

  • Technical Paper
  • Published:
Transactions of the Indian Institute of Metals Aims and scope Submit manuscript

Abstract

In this paper, the role of Ti on the in-situ formation of carbides and its effect on the microstructure of Fe-7Al-0.35C alloy have been investigated. Initially, Thermo-Calc software was used to predict the phases present in the alloys which were validated by experimental work. Vacuum arc remelting process was used to make an alloy pancake of 10-mm thickness, which was hot-rolled to 2-mm thickness. The alloys were characterised by X-ray diffraction, optical, scanning electron microscope and electron probe micro-analysis. The results show that all the alloys exhibit two types of TiC precipitates, which are dark cuboidal as primary and dark acicular type as secondary precipitates along with grey-coloured needle-shaped κ-carbide precipitate in α(Fe–Al) matrix. The carbon present in the alloy is partitioned between TiC and κ-carbide precipitates. Addition of Ti has also resulted in grain refinement of all the alloys.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

References

  1. Frommeyer G, Drewes E J, Engl B, La Revue de Métallurgie-CIT 10 (2000)1245.

    Article  Google Scholar 

  2. Rana R, JOM 66 (2014) 1730.

    Article  Google Scholar 

  3. Rana R, Liu C, Ray R K, Scr Mater 68 (2013) 354.

    Article  CAS  Google Scholar 

  4. Han S Y, Shin S Y, et al, Metall Mater Trans A 42(2011)138.

    Article  CAS  Google Scholar 

  5. Satya Prasad V V, Khaple Shivkumar, Baligidad R G, JOM 66 (2014)1785.

    Article  CAS  Google Scholar 

  6. Khaple Shivkumar, Satya Prasad V V, Golla Brahma Raju, Baligidad R G, Gokhale A A, Mater Sci Eng A 697 (2017)167.

    Article  Google Scholar 

  7. Khaple Shivkumar, Satya Prasad V V, unpublished data.

  8. Ko S H, Hanada S, Intermetallics 7 (1999)947.

    Article  CAS  Google Scholar 

  9. Parashivamurthy K I, Sampatha Kumaran P, Seetharamu S, Cryst Res Technol, 43, (2008)674.

    Article  CAS  Google Scholar 

  10. Kant R, Selokar A, Agarwal V, Prakash U, Adv Mater Res 1043 (2014)17.

    Article  Google Scholar 

Download references

Acknowledgements

The authors are grateful to Director DMRL, for his keen interest and permission to publish this work.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Shivkumar Khaple.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Khaple, S., Satya Prasad, V.V. & Golla, B.R. Microstructural Characterisation of Ti Containing Fe-7Al-0.35C Based Low-Density Steel. Trans Indian Inst Met 71, 2713–2716 (2018). https://doi.org/10.1007/s12666-018-1434-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12666-018-1434-5

Keywords

Navigation