Advertisement

Multi-objective Optimization of Electrodeposition of Ni–Al2O3 Nano Composite Coating on Al6061 Substrate

  • C. R. Raghavendra
  • S. Basavarajappa
  • Irappa Sogalad
Technical Paper

Abstract

Response surface methodology based Grey relation analysis has been used to optimize the coating parameters of composite coating on aluminium based alloys. This approach gives the best combination of coating parameters to get maximum coating thickness, adhesive strength, microhardness, and minimum wear rate. For each response, the effect of coating parameters at different levels have been discussed. From Grey relation grade, the optimum parameters for better composite coating performance are found to be: temperature, 34 °C; current density, 1 A/dm2; and percentage of particle loading, 1.2 g/L. At 95% significance level, the Current density shows statistical significance on overall composite coating performance.

Keywords

Ni–Al2O3 nano-composite coating RSM GRA 

References

  1. 1.
    Surender M, Basu B Ã, Balasubramaniam R, Tribol Int 37 (2004) 743.CrossRefGoogle Scholar
  2. 2.
    Du L, Xu B, Dong S, Yang H, Tu W Wear 257 (2004) 1058.CrossRefGoogle Scholar
  3. 3.
    Zhao H, Liu L, Hu W, Shen B Mater Des 28 (2007) 1374.CrossRefGoogle Scholar
  4. 4.
    Xue Y, Jia X, Zhou Y, Ma W, Li J Surf Coat Technol 200 (2006) 5677.CrossRefGoogle Scholar
  5. 5.
    Zishan C, Hejun L, Qiangang F Surf Coat Technol 213 (2012) 207.CrossRefGoogle Scholar
  6. 6.
    Gyftou P, Stroumbouli M, Pavlatou E A, Asimidis P, Spyrellis N Electrochema Acta 50 (2005) 4544.CrossRefGoogle Scholar
  7. 7.
    Jiménez H, Gil L, Staia M H, Puchi-cabrera E S Surf Coat Technol 202 (2008) 2072.CrossRefGoogle Scholar
  8. 8.
    Chen L, Wang L, Zeng Z, Zhang J Mater Sci Eng 434 (2006) 319.CrossRefGoogle Scholar
  9. 9.
    Tamilarasan T R, Rajendran R, Siva M, Sanjith U, Rajagopal G, Sudagar J Wear 347 (2016) 148.CrossRefGoogle Scholar
  10. 10.
    Gül H, Kılıc F, Aslan S, Alp A, Akbulut H Wear 267 (2009) 976.CrossRefGoogle Scholar
  11. 11.
    Narasimman P, Pushpavanam M, Periasamy V M Wear 292–293 (2012) 197.CrossRefGoogle Scholar
  12. 12.
    Narasimman P, Pushpavanam M, Periasamy V M Appl Surf Sci 258 (2011) 590.CrossRefGoogle Scholar
  13. 13.
    Lee H, Lee H, Jeon J Surf Coat Technol 201 (2007) 4711.CrossRefGoogle Scholar
  14. 14.
    Jeyaraj S, Arulshri K P, Sivasankaran S Arch Civ Mech Eng 16 (2015) 168.CrossRefGoogle Scholar
  15. 15.
    Zimmerman A F, Palumbo G, Aust K T, Erb U Mater Sci Eng A 328 (2002) 137.CrossRefGoogle Scholar
  16. 16.
    Soleimani R, Mahboubi F, Arman S Y, Kazemi M, Maniee A J Ind Eng Chem 23 (2015) 328.CrossRefGoogle Scholar
  17. 17.
    Oraon B, Majumdar G, Ghosh B Mater Des 29 (2008) 1412.CrossRefGoogle Scholar
  18. 18.
    Bose P S C, Rao C S P Grey Relational Analysis and Response Surface Methodology for Modeling, Analyzing and Optimization of machining parameters for turning Niobium C-103. Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering (2015) 107.Google Scholar
  19. 19.
    Sahoo A K, Sahoo B Meas J Int Meas Confed 46 (2013) 2854.CrossRefGoogle Scholar
  20. 20.
    Pawade R S, Joshi S S Int J Adv Manuf Technol 56 (2011) 47.CrossRefGoogle Scholar
  21. 21.
    Patel K M, Pandey P M, Rao P V Int J Adv Manuf Technol 47 (2010) 1137.CrossRefGoogle Scholar
  22. 22.
    Huang J T, Liao Y S Int J Prod Res 41 (2003) 1707.CrossRefGoogle Scholar
  23. 23.
    Raghavendra C R, Basavarajappa S, Sogalad I Electrodeposition of Ni–Al 2 O 3 Nano Composite Coating and Evaluation of Wear Characteristics IOP Sci 2016 1757-899X 149 012110.Google Scholar
  24. 24.
    Yang Y F, Gong Z Q, Deng L Y, Luo B P, Ma Y T, Yang Z H J. Cent. South Univ. Technol. (English Ed.) 13 (2006) 219.CrossRefGoogle Scholar
  25. 25.
    Lv B, Hu Z, Wang X, Xu B Surf Coat Technol 270 (2015) 123.CrossRefGoogle Scholar
  26. 26.
    Gyftou P, Pavlatou E A, Spyrellis N Appl Surf Sci 254 (2008) 5910.CrossRefGoogle Scholar
  27. 27.
    Socha R P, Nowak P, Laajalehto K, Väyrynen J Colloids Surf A Physicochem Eng Asp 235 (2004) 45.CrossRefGoogle Scholar
  28. 28.
    Lajevardi SA, Shahrabi T Appl Surf Sci 256 (2010) 6775.CrossRefGoogle Scholar
  29. 29.
    Shrestha N K, Kawai M, Saji T Surf Coat Technol 200 (2005) 2414.CrossRefGoogle Scholar
  30. 30.
    Zhao Y, Jiang C, Xu Z, Cai F, Zhang Z, Fu P Mater Des 85 (2015) 39.CrossRefGoogle Scholar
  31. 31.
    Deqing W, Ziyuan S, Tangshan K Surf Coat Technol 191 (2005) 324.CrossRefGoogle Scholar
  32. 32.
    Bull S J Tribol Int 30 (1997) 491.CrossRefGoogle Scholar
  33. 33.
    Góral A, Nowak M, Berent K, Kania B J Alloys Compd 615 (2014) 406.CrossRefGoogle Scholar
  34. 34.
    Azmmi N, Masripan B, Ohara K, Umehara N, Kousaka H, Tokoroyama T, Inami S, Zushi K, Fujita M Tribiol Int 65 (2013) 265.CrossRefGoogle Scholar
  35. 35.
    Krishnaveni K, Sankara Narayanan T S N, Seshadri S K Mater Chem Phys 99 (2006) 300.CrossRefGoogle Scholar
  36. 36.
    Feng Q, Li T, Yue H, Qi K, Bai F, Jin J Appl Surf Sci 254 (2008) 2262.CrossRefGoogle Scholar
  37. 37.
    Gül H, Kılıç F, Aslan S, Alp A, Akbulut H Wear 267 (2009) 976.CrossRefGoogle Scholar
  38. 38.
    Eslami M, Saghafian H, Golestani-fard F, Robin A Appl Surf Sci 300 (2014) 129.CrossRefGoogle Scholar
  39. 39.
    Garcia I, Fransaer J, Celis J Surf Coat Technol 148 (2001) 171.CrossRefGoogle Scholar
  40. 40.
    Vaezi M R, Sadrnezhaad S K, Nikzad L Colloids Surf A Physicochem Eng Asp 315 (2008) 176.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2018

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringGovernment Engineering CollegeHaveriIndia
  2. 2.Indian Institute of Information Technology, DharwadHubballiIndia
  3. 3.University BDT College of EngineeringDavanagereIndia

Personalised recommendations