Advertisement

Machining Characteristics and Corrosion Behavior of Grain Refined AZ91 Mg Alloy Produced by Friction Stir Processing: Role of Tool Pin Profile

  • Hemendra Patle
  • Ravikumar Dumpala
  • B. Ratna Sunil
Technical Paper
  • 135 Downloads

Abstract

In the present study, influence of friction stir processing (FSP) tool pin profile on the microstructure evolution, corrosion and machining characteristics of the AZ91 magnesium alloy was investigated. Three different pin profiles namely simple taper, threaded taper and square taper were selected and FSP was carried out at 1400 rpm and 25 mm/min tool travel speed. Microstructural observations indicated grain refinement from a starting grain size of 166.5–7.9, 22.1 and 4.08 µm for FSPed samples processed by simple taper, threaded taper and square taper pins, respectively. In all the FSPed samples, decreased amount of secondary phase (Mg17Al12) was observed compared with that of the unprocessed sample. From the X-ray diffraction analysis, it was observed that the square taper pin tool had induced higher texture effect compared with the other two FSP tools. From the electrochemical studies, the corrosion resistance of the sample processed with square taper pin tool was observed to be more in comparison to that of the other samples; which could be attributed to the texture effect and decreased fraction of secondary phase. Machining behavior assessed by conducting drilling experiments showed a significant influence of grain refinement on the cutting forces.

Keywords

Magnesium Pin profile Machining Corrosion Texture Grain refinement 

References

  1. 1.
    Friedrich H E, and Mordike B L, Magnesium Technology, vol. 788, Springer, Berlin (2006).Google Scholar
  2. 2.
    Mordike B, and Ebert T, Mater Sci Eng A 302 (2001) 37.CrossRefGoogle Scholar
  3. 3.
    Avedesian M M, and Baker H, ASM Specialty Handbook: Magnesium and Magnesium Alloys. ASM international, Almere (1999).Google Scholar
  4. 4.
    Valiev R, Nat Mater 3 (2004) 511.CrossRefGoogle Scholar
  5. 5.
    Dieter G E, Mechanical Metallurgy, 3 ed, McGraw Hill Education, New York (2013).Google Scholar
  6. 6.
    Mishra R S, and Ma Z, Mater Sci Eng R Rep 50 (2005) 1.CrossRefGoogle Scholar
  7. 7.
    Thomas W, Nicholas E, Needham J, Murch M, Templesmith P, and Dawes C, International Patent Application No. PCT/GB92/02203 (1991).Google Scholar
  8. 8.
    Chowdhury S, Chen D, Bhole S, and Cao X, Proc Eng 2 (2010) 825.CrossRefGoogle Scholar
  9. 9.
    Freeney T, and Mishra R, Metall Mater Trans A 41 (2010) 73.CrossRefGoogle Scholar
  10. 10.
    Park S H C, Sato Y S, and Kokawa H, Scripta Mater 49 (2003) 161.CrossRefGoogle Scholar
  11. 11.
    Afrin N, Chen D, Cao X, and Jahazi M, Mater Sci Eng A 472 (2008) 179.CrossRefGoogle Scholar
  12. 12.
    Fairman M, Afrin N, Chen D, Cao X, and Jahazi M, Can Metall Quart 46 (2007) 425.CrossRefGoogle Scholar
  13. 13.
    Lee W-B, Kim J-W, Yeon Y-M, and Jung S-B, Mater Trans 44 (2003) 917.CrossRefGoogle Scholar
  14. 14.
    Del Valle J, Rey P, Gesto D, Verdera D, Jiménez J, and Ruano O, Mater Sci Eng A 628 (2015) 198.CrossRefGoogle Scholar
  15. 15.
    Groover M P, Fundamentals of Manufacuring Enginereing, 4 ed, Weily, New York (2010).Google Scholar
  16. 16.
    Fang F, Lee L, and Liu X, J Mater Process Technol 167 (2005) 119.CrossRefGoogle Scholar
  17. 17.
    Friemuth T, and Winkler J, Adv Eng Mater 1 (1999) 183.CrossRefGoogle Scholar
  18. 18.
    Arai M, Sato S, Ogawa M, and Shikata H, J Mater Process Technol 62 (1996) 341.CrossRefGoogle Scholar
  19. 19.
    Sunil B R, Ganesh K, Pavan P, Vadapalli G, Swarnalatha C, Swapna P, Bindukumar P, and Reddy G P K, J Magnes Alloys 4 (2016) 15.CrossRefGoogle Scholar
  20. 20.
    Lapovok R, Molotnikov A, Levin Y, Bandaranayake A, and Estrin Y, J Mater Sci 47 (2012) 4589.CrossRefGoogle Scholar
  21. 21.
    Kiran G S, Krishna K H, Sameer S, Bhargavi M, Kumar B S, Rao G M, Naidubabu Y, Dumpala R, and Sunil B R, Trans Nonferrous Met Soc China 27 (2017) 804.CrossRefGoogle Scholar
  22. 22.
    Mansfeld F, Advances in Corrosion Science and Technology, 6 ed, Plenum Press, New York (1976) p 163.CrossRefGoogle Scholar
  23. 23.
    Zhang Y, Cao X, Larose S, and Wanjara P, Can Metall Quart 51 (2012) 250.CrossRefGoogle Scholar
  24. 24.
    Thomas W M, Staines D, Norris I, and De Frias R, Weld World 47 (2003) 10.CrossRefGoogle Scholar
  25. 25.
    Park S H C, Sato Y S, and Kokawa H, Metall Mater Trans A 34 (2003) 987.CrossRefGoogle Scholar
  26. 26.
    Pelleg J, Mechanical Properties of Materials, vo1. 190, Springer, New York (2012).Google Scholar
  27. 27.
    Pezeshkian M, Ebrahimzadeh I, and Gharavi F, J Tribol 140 (2017) 011607.CrossRefGoogle Scholar
  28. 28.
    Miyamoto H, Harada K, Mimaki T, Vinogradov A, and Hashimoto S, Corros Sci 50 (2008) 1215.CrossRefGoogle Scholar
  29. 29.
    Ralston K, and Birbilis N, Corrosion 66 (2010) 075005.CrossRefGoogle Scholar
  30. 30.
    Singh I, Singh M, and Das S, J Magnes Alloys 3 (2015) 142.CrossRefGoogle Scholar
  31. 31.
    Song G, Atrens A, and Dargusch M, Corros Sci 41 (1999) 249.CrossRefGoogle Scholar
  32. 32.
    Kawai T, and Takano N, Key Eng Mater 713 (2016) 284.CrossRefGoogle Scholar
  33. 33.
    Guo Y, Sealy M P, and Guo C, CIRP Ann Manuf Technol 61 (2012) 583.CrossRefGoogle Scholar
  34. 34.
    Saikrishna N, Reddy G P K, Munirathinam B, and Sunil B R, J Magnes Alloys 4 (2016) 68.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2017

Authors and Affiliations

  • Hemendra Patle
    • 1
  • Ravikumar Dumpala
    • 1
  • B. Ratna Sunil
    • 2
  1. 1.Department of Mechanical EngineeringVisvesvaraya National Institute of TechnologyNagpurIndia
  2. 2.Department of Mechanical EngineeringRajiv Gandhi University of Knowledge Technologies (AP-IIIT)NuzvidIndia

Personalised recommendations