Improvement of Microstructure, Mechanical Properties and Corrosion Resistance of Cast Al–12Si Alloy by Friction Stir Processing

Technical Paper
  • 53 Downloads

Abstract

Friction stir processing (FSP) was applied to casting and non heat-treated strengthening of Al–12Si aluminum alloy in order to enhance the mechanical properties by improving the microstructure. Moreover, the corrosion resistance of FSPed Al–12Si alloy is also examined. The results indicate that intense plastic deformation during FSP effectively results in the grain refinement of Al–12Si alloy, uniform distribution of Si particles and elimination of cast porosities, and the microstructures of Al–12Si alloy are significantly improved. The microhardness, tensile strength and elongation are increased to 57.15 HV, 159.39 MPa and 9.87% after FSP, respectively, The surface fracture of the FSPed tensile specimen exhibits a typical ductile dimple-fracture. Grain-boundary strengthening and dispersion strengthening of Si particles play important roles in enhancing the mechanical properties. Meanwhile, compared with cast alloy, FSPed Al–12Si alloy has more excellent corrosion resistance.

Keywords

Friction stir processing Cast Al–Si alloy Non heat-treated strengthening Mechanical property Corrosion resistance 

Notes

Acknowledgements

The work was supported by Basic Science Research Project of Colleges and Universities in Liaoning Province in China (Project number: LG201714).

References

  1. 1.
    Rathod N R, and Manghani J V, Int J Emerg Trends Eng Dev 5 (2012) 574.Google Scholar
  2. 2.
    Sumit M, Khan M D F, Bahu S, Immanuel R J, Panigrahi S K, and Janaki Ram G D, Mater Charact 113 (2016) 134.CrossRefGoogle Scholar
  3. 3.
    Guru P R, Khan MD F, Panigrahi S K, and Janaki Ram G D, J Manuf Process 18 (2015) 67.CrossRefGoogle Scholar
  4. 4.
    Santella M L, Engstrom T, Storjohann D, and Pan T, Scr Mater 53 (2005) 201.CrossRefGoogle Scholar
  5. 5.
    Rao A G, Rao B R K, Deshmukh V P, Shah A K, and Kashyap B P, Mater Lett 63 (2009) 2628.CrossRefGoogle Scholar
  6. 6.
    Jana S, Mishra R S, Baumann J B, and Grant G, Acta Mater 58 (2010) 989.CrossRefGoogle Scholar
  7. 7.
    Tsai F Y, and Kao P W, Mater Lett 80 (2012) 40.CrossRefGoogle Scholar
  8. 8.
    Santella M L, Engstrom T, Storjohann D, and Pan T Y, Scr Mater 53 (2005) 201.CrossRefGoogle Scholar
  9. 9.
    Tajiri A, Uematsu Y, Kakiuchi T, TozakiY, Suzuki Y, and Afrinaldi A, Int J Fatigue 80 (2005) 192.CrossRefGoogle Scholar
  10. 10.
    Zhou W S, and Yao J S, Weld Alum Alum Alloy (2006) 5.Google Scholar
  11. 11.
    Ma Z Y, Pilchak A L, Juhas M C, and Williams J C, Scr Mater 58 (2008) 361.CrossRefGoogle Scholar
  12. 12.
    Sarkari M, Khorrami, M S, Kazeminezhad M, and Kokabi A H, Mater Des 80 (2015) 41.CrossRefGoogle Scholar
  13. 13.
    Guo W, Wang K S, Wang W, and Wang W L, Ordnance Mater Sci Eng 32 (2009) 15 (in Chinese).Google Scholar
  14. 14.
    Cui Z Q, Metallogr Heat Trea (1997) 192 (in Chinese).Google Scholar
  15. 15.
    Sun H H, Wang H W, Chen D, Ma N H, and Li X F, Surf Interface Anal 40 (2008) 1388.CrossRefGoogle Scholar

Copyright information

© The Indian Institute of Metals - IIM 2017

Authors and Affiliations

  1. 1.School of Materials Science and EngineeringShenyang Ligong UniversityShenyangChina
  2. 2.Beijing Hongshen EducationDalianChina
  3. 3.Casting and Melting PlantNanshan Light Alloy Co. LtdLongkouChina

Personalised recommendations