Correction to: A Study on the Optimization of Joint Mandrel Shape for Manufacturing Long Type Elbow Using Push Bending Process

The Original Article is available

Correction to: International Journal of Precision Engineering and Manufacturing https://doi.org/10.1007/s12541-020-00443-4

During the correction process unfortunately the author photos in the biography section have been interchanged. The correction biographies should be as follows:

The original article has been corrected.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Choon-Man Lee.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Yang, YJ., Lee, CM. Correction to: A Study on the Optimization of Joint Mandrel Shape for Manufacturing Long Type Elbow Using Push Bending Process. Int. J. Precis. Eng. Manuf. 22, 509 (2021). https://doi.org/10.1007/s12541-021-00476-3

Download citation