Conventional bored piling excavation technique in a rock formation is a time-consuming and costly operation due to excavation speed. Blasting can be a useful method for the reduction of rock strength before bored pile excavation by breaking the rock in an area as large as the bored pile diameter. In this way, the drawbacks of pile driving operation can be minimized in terms of project time and cost. In this study, the usability of blasting was investigated in order to increase the speed of conventional bored piling excavation. For this aim, an analytical method based on the airy stress function was established to determine the fragmentation zone that provides sufficient fragmentation to facilitate the bored pile excavation operation in a motorway cut and cover tunnel project. In the model, the detonation pressure, the tensile strength of rock, explosive properties, and drill hole diameter were taken into consideration. The developed model was tested by three different blasting designs and a non-blasting excavation to verify its applicability for the bored pile excavation in the site. As a result, the suggested blasting method can be used in rock-socketed bored pile driving studies to obtain a fragmentation zone as much as pile diameter in order to increase excavation speed and reduce cost and to provide expected excavation performance. This study introduced a first in the literature that the blasting technique was used as the first stage of bored pile excavation. In addition, the developed method can be applied by revising according to different rock conditions and it can be used as a basic pre-design approach.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
Aksoy S, Önem GM, Yardım CH, Önem AD, Mudun İ, Aydın Ş, Uluca B, Bahar E, Coşkun O, Murat E (2017) Northern Marmara Highway Project Habibler Junction - Hasdal Junction (7th Section) Km: 61 + 117 - 69 + 325 Geological-Geotechnical Evaluation Report. Geomed Geotechnical Consultancy Co. Inc., 95 pages (In Turkish)
Atlas Powder Co. (1987) Explosive and rock blasting. ISBN: 0961628405, 9780961628406
Brady BHG, Brown ET (1993) Rock mechanics for underground mining. ISBN: 978-1-4020-2116-9
Cho SC, Nishi M, Yamamoto M, Kato M, Kaneko K (2002) Estimation of rock fragmentation in bench blasting using numerical simulations. Proceedings of the conference on explosives and blasting technique, vol 1, p 187–196
Chu KT, Wu SZ, Zhu WC, Tang CA, Yu TX (2003) Dynamic fracture and fragmentation of spheres, 16th ASCE engineering mechanics conference. University of Washington, Seatle, July 16-18
Cho SH, Nishi M, Yamamoto M, Kaneko K (2003) Fragment size distribution in blasting. Mter Trans 44(5):951–956. https://doi.org/10.2320/matertrans.44.951
Dally JW, Riley WF (1991) Experimental stress analysis. McGRAW-HILL Inc., 639 p. ISBN: 8 :007100825X
Dao DH, Pham TA (2018) Investigation of performance of soil-cement pile in support of foundation systems for high-rise buildings. Civil Eng J. https://doi.org/10.28991/cej-030990
Donzé FV, Bouchex J, Magnier SA (1997) Modelling fracture in rock blasting. Int J Rock Mech Min Sci 34(8):1153–1163. https://doi.org/10.1016/S1365-1609(97)80068-8
Duval WI, Atchinson TC (1957) Rock breakage by explosives. US Bureau of Mines Rep. Invest., USBM RI 5356, Washington
Esen S, Onederra I, Bilgin HA (2003) Modelling the size of the crushed zone around a drill hole. Int J Rock Mech Min Sci 40:485–495. https://doi.org/10.1016/S1365-1609(03)00018-2
Gamil Y, Bakar I, Ahmed K (2017) Simulation and development of instrumental setup to be used for cement grouting of sand soil. Ital J Sci Eng 1(No. 1). ISBN: 2610–9182
Grady DE, Kipp ME (1987) Dynamic rock fragmentation. In: Atkinson BK (ed) Fracture mechanics of rock. Academic press, London, pp 429–475
Hustrulid W (1999) Blasting principles for open pit mining. 2 Vol., 1012 p. AA Balkema. ISBN 90 5410 4597
Kapur PC, Pande D, Fuerstenau DW (1997) Analysis of single-particle breakage by impact grinding. Int J Miner Process 49:223–236. https://doi.org/10.1016/S0301-7516(96)00008-7
King RP, Bourgeois F (1993) Measurement of rock fracture energy during single-particle impact fracture. Miner Eng 6(4):353–367. https://doi.org/10.1016/0892-6875(93)90015-F
Kutter HK, Fairhurst C (1968) The roles of stress waves and gas pressure in presplitting. in Status of Practical Rock Mechanics, Proc. 9th US Symp. Rock Mech., AIME, New York, pp 265–284
Larisch MD (2012) Comparison of different hard rock drilling methods for bored piles. 16th Australian Geomechanics Symposium, 2012
Li C, Richard P, Nordlund E (1998) The stress-strain behaviour of rock material related to fracture under compression. Eng Geol 49:293–302. https://doi.org/10.1016/S0013-7952(97)00061-6
Li G, Xu X (1993) Experimental investigation of the energy-size reduction relationship in comminution using fractal theory. Miner Eng 6(2):163–172
Liu H, Kou SQ, Lindqvist P-A (2002) Numerical simulation of the fracture process in cutting heterogeneous brittle material. Int J Numer Anal Methods Geomech 26:1253–1278. https://doi.org/10.1002/nag.243
Maddah A, Soroush A (2019) A comprehensive numerical study on building-excavation interaction. Civil Eng J 6(2). https://doi.org/10.28991/cej-2020-03091474
Pronozin YA, Stepanov MA, Rachkov DV, Davlatov DN, Chikishev VB (2019) Laboratory investigation on interaction of the pile foundation strengthening system with the rebuilt solid pile-slab foundation. Civil Eng J 6(2). https://doi.org/10.28991/cej-2020-03091468
Reddish DJ, Stace LR, Vanichkobchinda P, Whittles DN (2005) Numerical simulation of the dynamic impact testing of rock. Int J Rock Mech Min Sci 42(2):167–176. https://doi.org/10.1016/j.ijrmms.2004.06.004
Remli S, Benselhoub A, Rouaiguia I (2018) Experimentation of a blasting theory for the digging of an underground horizontal excavation from Boukhadra iron mine (eastern Algeria). Acta Technica Corviniensis – Bulletin of Engineering Tome XI. ISSN: 2067-3809
Rizk AME, El-Sagger HAA, Doheim MA (1994) Examination of single and repetitive impact breakage. Miner Eng 6(4):479–490. https://doi.org/10.1016/0892-6875(94)90160-0
Shockey DA, Curran DR, Seamen L, Rosenberg JT, Petersen C (1974) Fragmentation of rock under dynamic loads. Int J Rock Mech Min Sci Geomech Abstr 11:303–317. https://doi.org/10.1016/0148-9062(74)91760-4
Tamrock (1984) Handbook on surface drilling and blasting. Painofaktorit, Finland 310 p
Tang CA, Kaiser PK (1998) Numerical simulation of cumulative damage and seismic energy release during brittle rock failure-part I: fundamental. Int J Rock Mech Min Sci 35(2):113–121
Thomas A, Filippov LO (1999) Fractures, fractals and breakage energy of mineral particle. Int J Miner Process 57:285–301. https://doi.org/10.1016/S0301-7516(99)00029-0
Thornton DM, Kanchibotla SS, Esterle JS (2001) A fragmentation model to estimate ROM size distribution of soft rock types, Proceedings of the 27th Annual Conference on Explosives and Blasting Technique. 27th Annual Conference on Explosives and Blasting Techniques, Orlando, Florida, (41–53). 28–31
Xue F, Zhang M (2019) Failure mode and stability of excavation face on shield tunnel undercrossing existing tunnel. Civil. Eng J 5(9). https://doi.org/10.28991/cej-2019-03091394
Whittaker BN, Singh RN, Sun G (1992) Rock fracture mechanics principles, design and applications. Amsterdam, Elsvier, 568 p. ISBN-13: 978-0444896841
Zhang YQ, Hao H, Lu Y (2003) Anisotropic dynamic damage and fragmentation of rock materials under explosive loading. Int J Eng Sci 41:917–929. https://doi.org/10.1016/S0020-7225(02)00378-6
The authors would like to thank Istanbul University-Cerrahpasa Engineering Faculty, Executive Secretariat of Scientific Research Projects of Istanbul University-Cerrahpasa, and KRP Construction Company.
This work was financially supported by the Executive Secretariat of Scientific Research Projects of Istanbul University-Cerrahpasa (codes of projects 7023, 10296, 8765, 13293, 21628, 25573) and Engineering Faculty Revolving Fund (code of project, 18.01.2018/24470).
Conflict of interest
The authors declare that they have no conflict of interest.
Responsible Editor: Zeynal Abiddin Erguler
About this article
Cite this article
Ozer, U., Karadogan, A., Sahinoglu, U.K. et al. An analytical and applied blasting approach to facilitate rock-socketed bored pile excavation. Arab J Geosci 13, 497 (2020). https://doi.org/10.1007/s12517-020-05549-7
- Blast-supported pile driving
- Bored pile excavation
- Fragmentation zone
- Blasting design
- Analytical model