Abstract
In this study, an optimum design for the combustion system of a genset diesel engine was conducted by using Design for Six Sigma (DFSS) methodology. As a result of this study, the best combination of design parameters to minimize the fuel consumption of the genset diesel engine was selected while meeting the requirements of NOx emission and peak firing pressure (PFP) limit. Compared to the initial design, the final design proposal has achieved 2.5 % and 1.6 % improvement in brake specific fuel consumption (BSFC) at switchable operating conditions, i.e., both 1500 and 1800 rpm. On the basis of this DFSS work, the design robustness was also enhanced. Hence, it is expected that the final design proposal would reduce the variability in fuel economy that could be caused by harsh environment and system aging. In this study, engine cycle simulation technique was employed to assess the effects of various design parameters on the performances of the genset diesel engine. The current optimum design work has considered four control factors such as turbocharger size, air temperature at charge air cooler (CAC) outlet, compression ratio, and fuel injection duration. Here, an L9 orthogonal array was used to efficiently choose the best design proposal among 81 design combinations (i.e., four independent control factors which individually have three different levels).
Similar content being viewed by others
Abbreviations
- μ :
-
mean value
- σ :
-
standard deviation
References
Baranescu, R. A., Desai, S. D. and Ginder, D. A. (1989). Optimization analysis of a diesel engine using cycle analysis and Taguchi methods. SAE Paper No. 891895.
Caton, J. A. (2015). An Introduction to Thermodynamic Cycle Simulations for Internal Combustion Engines. John Wiley & Sons. Chichester, UK.
Dober, G., Tullis, S., Greeves, G., Milovanovic, N., Hardy, M. and Zuelch, S. (2008). The impact of injection strategies on emissions reduction and power output of future diesel engines. SAE Paper No. 2008-01-0941.
Ghojel, J. I. (2010). Review of the development and applications of the Wiebe function: A tribute to the contribution of Ivan Wiebe to engine research. Int. J. Engine Research 11, 4, 297–312.
Gopalsamy, B. M., Mondal, B. and Ghosh, S. (2009). Taguchi method and ANOVA: An approach for process parameters optimization of hard machining while machining hardened steel. J. Scientific & Industrial Research, 68, 686–695.
Halsall, S., Luchansky, K., Zeng, Y., Davis, R. S. and Herrin, R. (2013). Development of the combustion system for the General Motors fifth generation “Small Block” engine family. SAE Paper No. 2013-01-1732.
Herrmann, H., Nielsen, B., Gropp, C. and Lehmann, J. (2012). Mercedes-Benz medium-duty commercial engines Part 1: Engine concept and exhaust aftertreatment. MTZ, 73, 4–11.
Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. McGraw-Hill. New York, USA.
Hu, M., Pieprzak, J. and Glowa, J. (2004). Essentials of design robustness in Design for Six Sigma (DFSS) methodology. SAE Paper No. 2004-01-0813.
Jääskeläinen, H. and Khair, M. K. (2018a). https://www.dieselnet.com/tech/air_cool.php
Jääskeläinen, H. and Khair, M. K. (2018b). https://www.dieselnet.com/tech/diesel-fundamentals.php
Jääskeläinen, H. and Khair, M. K. (2018c). https://www.dieselnet.com/tech/diesel_engines.php
Jensen, C., Quinlan, J. and Feiler, B. (2008). Robust engineering & DFSS: How to maximize user delight and function and minimize cost. SAE Paper No. 2008-01-0361.
Junior, H. M., Turrioni, J. B., Rosati, A. C., Neto, D. G., Goto, F. K., Mologni, J. F. and Fernandes, M. M. (2008). Application of design for Six Sigma (DFSS) on an automotive technology development process. SAE Paper No. 2008-36-0020.
Karnwal, A., Hasan, M. M., Kumar, N., Siddiquee, A. N. and Khan, Z. A. (2011). Multi-response optimization of diesel engine performance parameters using thumba biodiesel-diesel blends by applying the Taguchi method and grey relational analysis. Int. J. Automotive Technology 12, 4, 599–610.
Lee, K. W., Jang, K. I., Lee, J. J. and Hur, D. H. (2012). The new Hyundai/Kia 1.1-L three-cylinder diesel engine. MTZ, 73, 16–21.
Menacer, B. and Bouchetara, M. (2013). Numerical simulation and prediction of the performance of a direct injection turbocharged diesel engine. Simulation 89, 11, 1355–1368.
Moshat, S., Datta, S., Bandyopadhyay, A. and Pal, P. (2010). Optimization of CNC end milling process parameters using PCA-based Taguchi method. Int. J. Engineering, Science and Technology 2, 1, 95–102.
Reichert, E., Rompf, D. and Bick, W. (2005). Combustion engine design under use of Design for Six Sigma (DFSS). SAE Paper No. 2005-01-1611.
Reitz, R. D. and Rutland, C. J. (1995). Development and testing of diesel engine CFD models. Progress in Energy and Combustion Science 21, 2, 173–196.
Ricardo WAVE 8.2 Help System (2009). User Manual.
Roy, S., Das, A. K. and Banerjee, R. (2016). Grey-Fuzzy Taguchi approach for multi-objective optimization of performance and emission parameters of a single cylinder crdi engine coupled with EGR. Int. J. Automotive Technology 17, 1, 1–12.
Silva, M. B., Carneiro, L. M., Silva, J. P. A., Oliveira, I. S., Filho, H. J. I. and Almeida, C. R. O. (2014). An application of the Taguchi method (Robust design) to environmental engineering: Evaluating advanced oxidative processes in polyester-resin wastewater treatment. American J. Analytical Chemistry 5, 13, 828–837.
Taguchi, G., Chowdhury, S. and Taguchi, S. (2000). Robust Engineering. McGraw Hill. New York, USA.
Wang, T. J., Lee, J. Y., Hwang, S. K., Cho, J. Y., Park, J. K., Lee, W. G., Kim, T. S., Jeong, S. W. and Kim, T. K. (2017). Combustion system development of a new DX12 heavy-duty diesel engine with mechanical fuel injection equipment. SAE Paper No. 2017-01-0694.
Wang, T. J., Lee, J. Y., Shim, E. J., Kim, D. S. and Lee, D. I. (2011). Performance evaluation on the addition of low-pressure loop EGR in a commercial diesel engine. Trans. Korean Society of Automotive Engineers 19, 2, 105–110.
Xin, Q. (2011). Diesel Engine System Design. Woodhead Publishing Ltd. Cambridge, UK.
Yang, K. and El-Haik, B. (2003). Design for Six Sigma: A Roadmap for Product Development. McGraw-Hill. New York, USA.
Yoo, D., Song, J., Kim, Y., Jung, W. and Kim, D. (2015). Fuel consumption improvement of 2.4 L ULPC diesel engine by optimizing the combustion system; Nozzle, swirl ratio and piston bowl geometry. SAE Paper No. 2015-01-0785.
Acknowledgement
The authors would like to express special thanks to E.R. Choi and J.Y. Chang for their valuable supports and discussions regarding the use of DFSS methodology.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, T.J., Hwang, S.K. Combustion System Design of a Genset Diesel Engine by Using DFSS Methodology. Int.J Automot. Technol. 20, 539–547 (2019). https://doi.org/10.1007/s12239-019-0051-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-019-0051-6