Advertisement

Journal of Mechanical Science and Technology

, Volume 33, Issue 6, pp 2617–2622 | Cite as

Investigation of the perception characteristics of multiple impact sounds occurring from the manipulation of electronic devices

  • Seongyoung Jeong
  • Buhm Park
  • Yunsang Kwak
  • Junhong ParkEmail author
Article
  • 28 Downloads

Abstract

Electronic devices must be quiet during manipulation for operations. In addition, the sounds need to show distinct impression to satisfy the user’s auditory experience and indicate the completion of an operation. The sounds occur in a short time from frictional contact and the consequent structural vibration when a user operates a device. In this study, the impact sound during printer cassette insertion is analyzed. The rail vibration during closure movement generates continuous sound. This movement ends with the impact sound from contact between the cassette and printer body. The sounds occur as clicking sounds with double impacts separated by a short interval. This clicking sound is important serving as an indicator of completed insertion. The user’s perception of this complex sound is investigated. A physical index to quantify the generated sound is proposed to assist comparisons between printers. Prony’s method was used to characterize the sound features including duration, double impact interval, magnitudes, and decay rates. From the extracted features, artificial clicking sounds were simulated for sound quality evaluations. Auditory experiments were performed to investigate the user’s preference for the separated rail and impact noises. The just noticeable difference was defined to classify the important factors influencing the perception characteristics.

Keywords

Impact sounds Sound quality evaluation Electronic devices Signal processing 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgments

This research was supported by Samsung Electronics Co., Ltd.

References

  1. [1]
    A. Fenko, H. N. J. Schifferstein and P. Hekkert, Shifts in sensory dominance between various stages of user-product interactions, Appl. Ergon., 41 (2010) 34–40, Doi: 10.1016/j.apergo. 2009.03.007.CrossRefGoogle Scholar
  2. [2]
    S. Namba, T. Hashimoto and C. G. Rice, The loudness of decaying impulsive sounds, J. Sound Vib., 116 (1987) 491–507, Doi: 10.1016/S0022-460X(87)81380-9.CrossRefGoogle Scholar
  3. [3]
    E. Parizet, E. Guyader and V. Nosulenko, Analysis of car door closing sound quality, Appl. Acoust., 69 (2008) 12–22, Doi: 10.1016/j.apacoust.2006.09.004.CrossRefGoogle Scholar
  4. [4]
    M. Hoechstetter, J. M. Sautter, U. Gabbert and J. L. Verhey, Role of the duration of sharpness in the perceived quality of impulsive vehicle sounds, Acta Acust. United with Acust., 102 (2016) 119–128, Doi: 10.3813/AAA.918929.CrossRefGoogle Scholar
  5. [5]
    H. Jo, W. Seong, H. Lee, S. Kim, D. Park and Y. June, A study on sound quality evaluation index of car door latch and improving sound quality by modifying door latch assembly design, Inter-Noise 2014 (2014) 1–8.Google Scholar
  6. [6]
    D. Hamilton, Sound quality of impulsive noises: An applied study of automotive door closing sounds, SAE Technical Paper 1999–01–1684 (1999) Doi: 10.4271/1999–01–1684.Google Scholar
  7. [7]
    D. Västfjäll, M.-A. Gulbol, M. Kleiner and T. Gärling, Affective evaluations of and reactions to exterior and interior vehicle auditory quality, J. Sound Vib., 255 (2002) 501–518, Doi: 10.1006/jsvi.2001.4166.CrossRefGoogle Scholar
  8. [8]
    S. H. Park and P. J. Lee, A qualitative study of annoyance caused by floor impact sounds in apartment buildings, Eu-roNoise 2015, 31 May — 3 June, Maastricht (2015).Google Scholar
  9. [9]
    B. Park, J. Y. Jeon and J. Park, Force generation characteristics of standard heavyweight impact sources used in the sound generation of building floors, J. Acoust. Soc. Am., 128 (2010) 3507–3512.CrossRefGoogle Scholar
  10. [10]
    S. Lee, D. Hwang, J.-Y. Jeon and J. Park, Cause and perception of amplitude modulation of heavy — weight impact sound in concrete wall structure, Build Environ., 94 (2015) 785–792.CrossRefGoogle Scholar
  11. [11]
    Y. Kwak, S. Lee, J. Park, D. Hwang, J. Y. Jeon and J. Park, Effect of the static compressive load on vibration propagation in multistory buildings and resulting heavy-weight floor impact sounds, J. Acoust. Soc. Am., 142 (2017) 308–316, https://doi.org/10.1121/1.4994290.CrossRefGoogle Scholar
  12. [12]
    J. R. Robertsa, R. Jonesa, N. J. Mansfieldb and S. J. Rothberga, Evaluation of impact sound of the ‘feel’ of a golf shot, J. Sound Vib., 287 (2005) 651–666.CrossRefGoogle Scholar
  13. [13]
    J. Gaspar, M. Fontul, E. Henriques, A. Ribeiro and N. Val-verde, Psychoacoustics of incar switch buttons: from feelings to engineering parameters, Appl. Acoust., 110 (2016) 280–296, Doi: 10.1016/j.apacoust.2016.03.037.CrossRefGoogle Scholar
  14. [14]
    T. Wellings, M. Williams and C. Tennant, Understanding customers’ holistic perception of switches in automotive human-machine interfaces, Appl. Ergon., 41 (2010) 8–17, Doi: 10.1016/j.apergo.2009.03.004.CrossRefGoogle Scholar
  15. [15]
    J. M. Doughty and W. R. Garner, Pitch characteristics of short tones. I. Two kinds of pitch threshold, J. Exp. Psychol., 37 (1947) 351–365, Doi: 10.1037/h0061516.CrossRefGoogle Scholar
  16. [16]
    E. Zwicker and H. Fastl, Psychoacoustics: Facts and Models, Springer-Verlag, Berlin, Germany (1999) 247–264.CrossRefGoogle Scholar
  17. [17]
    S. J. Hu, W. L. Yang and H. J. Li, Signal decomposition and reconstruction using complex exponential models, Mech. Syst. Signal Process., 40 (2013) 421–438.CrossRefGoogle Scholar

Copyright information

© KSME & Springer 2019

Authors and Affiliations

  • Seongyoung Jeong
    • 1
  • Buhm Park
    • 1
  • Yunsang Kwak
    • 1
  • Junhong Park
    • 1
    Email author
  1. 1.Department of Mechanical EngineeringHanyang UniversitySeoulKorea

Personalised recommendations