The improved effect of the bonding behavior of concrete and reinforcement is a critical indicator for estimating the validity of strengthening measures. The bonding behavior of unconfined or textile reinforced concrete (TRC)-confined concrete and a plain or deformed reinforcement was comparatively analyzed via the pull-out tests, and the influence of chloride wet-dry cycles also was considered on the bonding behavior. Moreover, the bonding behavior was further revealed from the view of energy. The study results indicated that the bonding failure of specimens with a deformed reinforcement was changed after TRC confinement, showing a certain ductile failure characteristic, and the integrity of the confined specimens was ensured at failure. The impact of chloride attack on the bonding behavior of concrete and a plain or deformed reinforcement was different under the unconfined or TRC-confined condition. The deterioration mechanism of the bonding behavior needs to be further investigated when the reinforcement is corroded seriously. The results from the energy analysis are consistent with the pull-out test results.
This is a preview of subscription content, access via your institution.
Buy single article
Instant access to the full article PDF.
Tax calculation will be finalised during checkout.
Abbas S, Soliman AM, Nehdi ML (2015) Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages. Construction & Building Materials 75:429–441, DOI: https://doi.org/10.1016/j.conbuildmat.2014.11.017
Awani O, El-Maaddawy T, Ismail N (2017) Fabric-reinforced cementitious matrix: A promising strengthening technique for concrete structures. Construction & Building Materials 132:94–111, DOI: https://doi.org/10.1016/j.conbuildmat.2016.11.125
Coccia S, Imperatore S, Rinaldi Z (2016) Influence of corrosion on the bond strength of steel rebars in concrete. Materials & Structures 49(1-2):537–551, DOI: https://doi.org/10.1617/s11527-014-0518-x
D’Antino T, Carloni C, Sneed LH, Pellegrino C (2014) Matrix-fiber bond behavior in PBO FRCM composites: A fracture mechanics approach. Engineering Fracture Mechanics 117(1):94–111, DOI: https://doi.org/10.1016/j.engfracmech.2014.01.011
Jayaprakash J, Pournasiri E, De’Nan F (2012) Effect of bond strength on fiber reinforced polymer enveloped concrete cylinders with rebars exposed to corrosion activity. Journal of Reinforced Plastics & Composites 31(12):845–854, DOI: https://doi.org/10.1177/0731684412448103
Lee DH, Han SJ, Kang SK, LaFave JM (2017) Shear strength of reinforced concrete beams strengthened in shear using externally-bonded FRP composites. Composite Structures 117(1):177–187, DOI: https://doi.org/10.1016/j.compstruct.2017.04.025
Papakonstantinou C G, Balaguru PN, Auyeung Y (2011) Influence of FRP confinement on bond behavior of corroded steel reinforcement. Cement & Concrete Composites 33(5):611–621, DOI: https://doi.org/10.1016/j.cemconcomp.2011.02.006
Seo H, Jiang H, Lee I (2017) Experimental investigation of salt fog effect on the CFRP laminates. Advanced Composite Materials 26(4):321–334, DOI: https://doi.org/10.1080/09243046.2016.1187822
Stewart MG, Wang X, Nguyen MN (2011) Climate change impact and risks of concrete infrastructure deterioration. Engineering Structures 33(4):1326–1337, DOI: https://doi.org/10.1016/j.engstruct.2011.01.010
Tondolo F (2015) Bond behaviour with reinforcement corrosion. Construction & Building Materials 93:926–932, DOI: https://doi.org/10.1016/j.conbuildmat.2015.05.067
Tsesarsky M, Katz A, Peled A, Sadot O (2015) Textile reinforced concrete (TRC) shells for strengthening and retrofitting of concrete elements: Influence of admixtures. Materials & Structures 48(1-2):471–484, DOI: https://doi.org/10.1617/s11527-013-0197-z
Woods JE, Lau DT, Cruz-Noguez CA (2016) In-plane seismic strengthening of nonductile reinforced concrete shear walls using externally bonded CFRP sheets. Journal of Composites for Construction 20(6):04016052, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000705
Yalciner H, Eren O, Sensoy S (2012) An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover, strength and corrosion level. Cement & Concrete Research 117(5):643–655, DOI: https://doi.org/10.1016/j.cemconres.2012.01.003
Yin SP, Jing L, Yin MT, Wang B (2019) Mechanical properties of textile reinforced concrete under chloride wet-dry and freeze-thaw cycle environments. Cement and Concrete Composites 96:118–127, DOI: https://doi.org/10.1016/j.cemconcomp.2018.11.020
Yin SP, Peng C, Jin ZY (2016) Research on mechanical properties of axial-compressive concrete columns strengthened with TRc under a conventional and chloride wet-dry cycle environment. Journal of Composites for Construction 117(1):04016061, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000725
Zhao YX, Lin HW, Wu K, Jin WL (2013) Bond behaviour of normal/recycled concrete and corroded steel bars. Construction & Building Materials 48(11):348–359, DOI: https://doi.org/10.1016/j.conbuildmat.2013.06.091
Zhou YW, Dang LJ, Sui LL, Li DW, Zhao XM, Xing F, Wu YF (2017) Experimental study on the bond behavior between corroded rebar and concrete under dual action of FRP confinement and sustained loading. Construction & Building Materials 155:605–616, DOI: https://doi.org/10.1016/j.conbuildmat.2017.08.049
Thanks for the support from Fundamental Research Funds for the Central Universities (2017XKQY053).
About this article
Cite this article
Jing, L., Yin, S. & Lv, H. Bonding Behavior of Textile Reinforced Concrete (TRC)-Confined Concrete and Reinforcement under Chloride Erosion Environment. KSCE J Civ Eng 24, 826–834 (2020). https://doi.org/10.1007/s12205-020-0711-0
- Textile-reinforced concrete
- Bonding behavior
- Pull-out test
- Wet-dry cycle
- Energy analysis