Abstract
A simplified nonlinear fiber-based finite element model of steel-concrete partially composite beams utilizing channel type mechanical shear connectors is developed in OpenSees framework. The interaction between steel beam and concrete slab is accounted for by introducing nonlinear zero length elements and rigid links. The channel shear connector response used in numerical models is based on the previously obtained experimental response from pushout tests. Accuracy of the numerical models in predicting the response of beams is verified with the results of the previously conducted composite beam tests. The numerically predicted response agrees well with the experimental results over the entire range of load-deflection curves for both the fully composite and partially composite beams. The numerical models are also able to accurately predict the interface slip between steel beam and concrete slab when compared to the experimentally determined slip values, as well as the closed form slip predictions. Analysis results allowed the investigation of how the influence of steel and concrete damage is reflected on the overall loaddeflection response of composite beams.
Similar content being viewed by others
References
ACI (2008). Building code requirement for reinforced concrete, ACI 318M–08, American Concrete Institute, Farmington Hills, MI, USA.
AISC (2010). Specification for structural steel buildings, ANSI/AISC 360–10, American Institute of Steel Construction, Chicago, IL, USA.
Baran, E. and Topkaya, C. (2012). “An experimental study on channel type shear connectors.” Journal of Constructional Steel Research, vol. 74, pp. 108–117, DOI: 10.1016/j.jcsr.2012.02.015.
Baran, E. and Topkaya, C. (2014). “Behavior of steel–concrete partially composite beams with channel type connectors.” Journal of Constructional Steel Research, vol. 97, pp. 69–78, DOI: 10.1016/j.jcsr.2014.01.017.
CSA (2001). CAN/CSA–S16–01 limit states design of steel structures, including CSA–S16S1–05, Canadian Standard Association Toronto, ON, Canada.
Chiorean, C. G. and Buru, S. M. (2016). “Practical nonlinear inelastic analysis method of composite steel–concrete beams with partial composite action.” Engineering Structures, vol. 134, pp. 74–106, DOI: 10.1016/j.engstruct.2016.12.017.
Colajanni, P., La Mendola, L., Latour, M., Monaco, A., and Rizzano, G. (2016). “Fem analysis of push–out test response of hybrid steel trussed concrete beams (hstbcs).” Journal of Constructional Steel Research, vol. 111, pp. 88–102, DOI: 10.1016/j.jcsr.2015.04. 011.
Colajanni, P., La Mendola, L., Latour, M., Monaco, A., and Rizzano, G. (2017). “Analytical prediction of the shear connection capacity in composite steel–concrete trussed beams.” Materials and Structures, Vol. 50, pp. 48, DOI: 10.1617/s11527–016–0931–4.
Dall’Asta, A. and Zona, A. (2002). “Non–linear analysis of composite beams by a displacement approach.” Computers and Structures, vol. 80, Nos. 27–30, pp. 2217–2228, DOI: 10.1016/S0045–7949(02)00268–.7.
Griffis, L. G. (1986). “Some design considerations for composite–frame structures.” Engineering Journal, vol. 23, no. 2, pp. 59–64.
Jurkiewiez, B., Maeud, C., and Ferrier, E. (2014). “Non–linear Models for steel–concrete epoxy–bonded beams.” Journal of Constructional Steel Research, vol. 100, pp. 108–121, DOI: 10.1016/j.jcsr.2014.04.005.
Lam, D. and Ellobody, E. (2005). “Behavior of headed stud shear connectors in composite beam.” Journal of Structural Engineering, ASCE, vol. 131, no. 1, pp. 96–107, DOI: 10.1061/(ASCE)0733–9445(2005)131:1(96).
Lin, W. and Yoda, T. (2014). “Numerical study on horizontally curved steel–concrete composite beams subjected to hogging moment.” International Journal of Steel Structures, vol. 14, no. 3, pp. 557–569, DOI: 10.1007/s13296–014–3013–x.
Majdi, Y., Hsu, C. T., and Zarei, M. (2014). “Finite element analysis of new composite floors having cold–formed steel and concrete slab.” Engineering Structures, vol. 77, pp. 65–83, DOI: 10.1016/j.engstruct. 2014.07.030.
Maleki, S. and Bagheri, S. (2008a). “Behavior of channel shear connectors, Part I: Experimental study.” Journal of Construction Steel Research, vol. 64, no. 12, pp. 1333–1340, DOI: 10.1016/j.jcsr.2008.01.010.
Maleki, S. and Bagheri, S. (2008b). “Behavior of channel shear connectors, Part II: Analytical study.” Journal of Construction Steel Research, vol. 64, no. 12, pp. 1341–1348, DOI: 10.1016/j.jcsr.2008.01.006.
McKenna, F. T. (1997). Object–oriented finite element programming: Frameworks for analysis, algorithms and parallel computing, PhD Thesis, University of California, Berkeley, CA, USA.
Pan, W. H., Tao, M. X., and Nie, J. G. (2017). “Fiber beam–column element model considering reinforcement anchorage slip in the footing.” Bull Earthquake Engineering, vol. 15, no. 3, pp. 991–1018, DOI: 10.1007/s10518–016–9987–3.
Pashan, A. and Hosain, M. U. (2009). “New design equations for channel shear connectors in composite beams.” Canadian Journal of Civil Engineering, vol. 36, no. 9, pp. 1435–1443, DOI: 10.1139/L09–078.
Queiroza, F. D, Vellascob, P. C. G. S., and Nethercot, D. A. (2007). “Finite element modelling of composite beams with full and partial shear connection.” Journal of Constructional Steel Research, vol. 63, no. 4, pp. 505–521, DOI: 10.1016/j.jcsr.2006.06.003.
Ranzi, G. and Zonai A. (2007). “A steel–concrete composite beam model with partial interaction including the shear deformability of the steel component.” Engineering Structures, vol. 29, no. 11, pp. 3026–3041, DOI: 10.1016/j.engstruct.2007.02.007.
Rios, J. D., Cifuentes, H., Concha, A. M., and Reguera, F. M. (2017). “Numerical modelling of the shear–bond behaviour of composite slabs in four and six–point bending tests.” Engineering Structures, vol. 133, pp. 91–104, DOI: 10.1016/j.engstruct.2016.12.025.
Salari, M. R., Spacone, E., Shing, P. B., and Frangopol, D. M. (1998), “Nonlinear analysis of composite beams with deformable shear connectors.” ASCE Journal of Structural Engineering, vol. 124, no. 10, pp. 1148–1158.
Shariati, M., Sulong, N. H. R., M. M., Arabnejad, K. H., and Mahoutian, M. (2011). “Shear resistance of channel shear connectors in plain reinforced and lightweight concrete.” Scientific Research and Essays, vol. 6, no. 4, pp. 977–983, DOI: 10.5897/SRE10.1120.
Tao, M. X. and Nie, J. G. (2014). “Fiber beam–column model considering slab spatial composite effect for nonlinear analysis of composite frame systems.” ASCE Journal of Structural Engineering, vol. 140, no. 1, pp. 1–16, DOI: 10.1061/(ASCE)ST.1943–541X.0000815.
Viest, I. M., Colaco, J. P., Furlong, R. W., Griffis, L. G., Leon, R. T., and Wyllie, L. A. (1997). Composite construction design for buildings, McGraw–Hill New York, NY, USA.
Wang, Y. H., Nie, J. G., and Cai, C. S. (2013). “Numerical modeling on concrete structures and steel–concrete composite frame structures.” Composites: Part B, vol. 51, pp. 58–67, DOI: 10.1016/j.compositesb.2013.02.035.
Wang, S., Tong, G., and Zhang, L. (2017). “Reduced stiffness of composite beams considering slip and shear deformation of steel.” Journal of Constructional Steel Research, vol. 131, pp. 19–29, DOI: 10.1016/j.jcsr.2016.12.003.
Zsarnóczay, Á. (2013). Experimental and numerical investigation of buckling restrained braced frames for eurocode conform design procedure development, PhD Thesis, University of Technology and Economics, Budapest, Hungary.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ozturk, A., Baran, E. & Tort, C. Nonlinear Fiber Modeling of Steel-Concrete Partially Composite Beams with Channel Connectors. KSCE J Civ Eng 23, 2227–2242 (2019). https://doi.org/10.1007/s12205-019-1163-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-019-1163-2