Abstract
This study applied two feed-forward type computational methods to estimate the Unconfined Compression Strength (UCS) of stabilized peat soil with natural filler and cement. For this purpose, experimental data was obtained via testing of 271 samples at different natural filler and cement mixture dosages. The input parameters for the developed UCS (output) model were: 1) binder dosage, 2) coefficient of compressibility, 3) filler dosage, and 4) curing time. The model estimated the UCS through two types of feed-forward Artificial Neural Network (ANN) models that were trained with Particle Swarm Optimization (ANN-PSO) and Back Propagation (ANN-BP) learning algorithms. As a means to validate the precision of the model two performance indices i.e., coefficient of correlation (R2) and Mean Square Error (MSE) were examined. Sensitivity analyses was also performed to investigate the influence of each input parameters and their contribution on estimating the output. Overall, the results showed that MSE(PSO) < MSE(BP) while R2(PSO) > R2(BP); suggesting that the ANN-PSO model better estimates the UCS compared to ANN-BP. In addition, on the account of sensitivity analysis, it is found that the binder and filler content were the two most influential factors whilst curing period was the least effective factor in predicting UCS.
Similar content being viewed by others
References
Abolfathi, S., Yeganeh-Bakhtiary, A., Hamze-Ziabari, S. M., and Borzooei, S. (2016). “Wave run up prediction using M5’ model tree algorithm.” Ocean Engineering, Vol. 112, pp. 76–81, DOI: 10.1016/j.oceaneng.2015.12.016.
Akbas, B., Shen, J., and Sabol, T. A. (2011). “Estimation of seismicinduced demands on column splices with a neural network model.” Applied Soft Computing, Vol. 11, No. 8, pp. 4820–4829, DOI: 10.1016/j.asoc.2011.06.019.
Aladag, C. H., Kayabasi, A., and Gokceoglu, C. (2013). “Estimation of pressuremeter modulus and limit pressure of clayey soils by various artificial neural network models.” Neural Computing and Applications Vol. 23, No. 2, pp. 333–339, DOI: 10.1007/s00521-012-0900-y.
ASTM (1992). Annual book of ASTM standards, American Society for Testing Materials (ASTM) International, Philadelphia, PA, USA.
ASTM (2000). Annual book of ASTM standards, American Society for Testing Materials (ASTM) International, Philadelphia, PA, USA.
BS (1990). Methods of test for soils for civil engineering purposes, British Standards Institute, London, UK.
Dehghanbanadaki, A., Arefnia, A., Keshtkarbanaeemoghadam, A., Ahmad, K., Motamedi, S., and Hashim, R. (2017). “Evaluating the compression index of fibrous peat treated with different binders.” Bulletin of Engineering Geology and the Environment, Vol. 76, No. 2, pp. 575–586, DOI: 10.1007/s10064-016-0890-6.
Edil, T. B. (2001). “Site characterization in peat and organic soils.” Proc. International Conference on in situ Measurement of Soil Properties and Case Histories, Bali, Indonesia, pp. 49–59.
Edil, T. B. (2003). “Recent advances in geotechnical characterization and construction over peats and organic soils.” Proceedings of the 2nd International Conferences in Soft Soil Engineering and Technology, Putrajaya, Malaysia, pp. 1–16.
EuroSoilStab (2002). “Development of design and construction methods to stabilize soft organic soils: Design guide soft soil stabilization.” CT97-0351. Industrial and Materials Technologies Program (Brite-EuRam III), European Commission.
Ferentinou, M. D. and Sakellariou, M. G. (2007). “Computational intelligence tools for the prediction of slope performance.” Computers and Geotechnics, Vol. 34, No. 5, pp. 362–384, DOI: 10.1016/j.compgeo.2007.06.004.
Garson, G. D. (1991). “Interpreting neural-network connection weights.” Artif Intell Expert, Vol. 6, No. 7, pp. 47–5.
Gevrey, M., Dimopoulos, I., and Lek, S. (2003). “Review and comparison of methods to study the contribution of variables in artificial neural network models.” Ecological modelling, Vol. 160, No. 3, pp. 249–264, DOI: 10.1016/S0304-3800(02)00257-0.
Goh, A. T. C. (1995). “Modeling soil correlations using neural networks.” J. Comput. Civil Engrg., ASCE, Vol. 9, No. 4, pp. 275–278. DOI: 10.1061/(ASCE)0887-3801(1995)9:4(275).
Gordan, B., Armaghani, D. J., Hajihassani, M., and Monjezi, M. (2016). “Prediction of seismic slope stability through combination of particle swarm optimization and neural network.” Engineering with Computers, Vol. 32, No. 1, pp. 85–97, DOI: 10.1007/s00366-015-0400-7.
Hashim, R. and Islam, S. (2008). “Engineering properties of peat soils in peninsular Malaysia.” Journal of Applied Sciences, Vol. 8, No. 22, pp. 4215–4219.
Head, K. H. and Epps, R. J. (2011). “Manual of soil laboratory testing.” Vol. 2, pp. 324–340.
Hebib, S. and Farrell, E. R. (1999). “Some experience of stabilizing Irish organic soils.” Proc. Int. Conf. on Dry Mix Methods for Deep Soil Stabilization, Stockholm, Sweden, pp. 81–84.
Hobbs, N. B. (1986). “Mire morphology and the properties and behavior of some british and foreign peats.” Quart. J. Eng. Geol., Vol. 19, No. 1, pp. 7–80, DOI: 10.1144/GSL.QJEG.1986.019.01.02.
Hornik, K., Stinchcombe, M., and White, H. (1989). “Multilayer feedforward networks are universal approximators.” Neural Networks, Vol. 2, No. 5, pp. 359–366, DOI: 10.1016/0893-6080(89)90020-8.
Huang, G. B., Chen, L., and Siew, C. K. (2006). “Universal approximation using incremental constructive feedforward networks with random hidden nodes.” IEEE Trans. Neural Networks, Vol. 17, No. 4, pp. 879–892.
Huat, B., Prasad, A., Asadi, A., and Kazemian, S. (2014). Geotechnics of organic soils and peat. CRC Press.
Hwang, J., Humphrey, A., Bobet, A., and Santagata, M. C. (2005). Stabilization and improvement of organic soils, JTRP Technical Report, Publication FHWA/IN/JTRP-2004/38, Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, IN, USA, DOI: 10.5703/1288284314216.
Jung, S. and Ghaboussi, J. (2006). “Neural network constitutive model for rate-dependent materials.” Comput. Struct., Vol. 84, Nos. 15–16, pp. 955–963, DOI: 10.1016/j.compstruc.2006.02.015.
Kalantari, B. and Prasad, A. (2014). “A study of the effect of various curing techniques on the strength of stabilized peat.” Transportation Geotechnics, Vol. 1, No. 3, pp. 119–128, DOI: 10.1016/j.trgeo.2014.06.002.
Kennedy, J. and Eberhart, R. C. (1995). “Particle swarm optimization.” Proceedings of IEEE international conference on neural networks, Piscataway, NJ, USA, pp. 1942–1948.
Kim, Y. S. and Kim, B. K. (2006) “Use of artificial neural networks in the prediction of liquefaction resistance of sands.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 132, No. 11, pp. 1502–1504. DOI: 10.1061/(ASCE)1090-0241(2006)132:11(1502).
Landva, A. O. and Pheeney, P. (1980). “Peat fabric and structure.” Canadian Geotechnical Journal, Vol. 17, No. 3, pp. 416–435, DOI: 10.1139/t80-048.
Larose, D. T. (2005). Discovering knowledge in data: An introduction to data mining, John Wiley & Sons, Inc., Hoboken, NJ, USA.
Long, M. and Boylan, N. (2012). “In-situ testing of peat - A review and update on recent developments.” Geotechnical Engineering Journal of the SEAGS and AGSSEA, Vol. 43, No. 4, pp. 41–45.
Maroufpoor, E., Sanikhani, H., Emamgholizadeh, S., and Kisi, Ö. (2017). “Estimation of wind drift and evaporation losses from sprinkler irrigation systems by different data-driven methods.” Irrigation and Drainage, Vol. 67, No. 2, pp. 222–232, DOI: 10.1002/ird.2182.
Matlab (2016). “The language of technical learning.” Matworks Version R2016a.
Mesri, G. and Ajlouni, M. (2007). “Engineering properties of fibrous peats.” J. Geotech. Geoenvironmental Eng. Vol. 133, No. 7, pp. 850–66, DOI: 10.1061.
Momeni, E., Armaghani, D. J., Hajihassani, M., and Amin, M. F. M. (2015). “Prediction of uniaxial compressive strength of rock samples using hybrid particle swarm optimization-based artificial neural networks.” Measurement, Vol. 60, pp. 50–63, DOI: 10.1016/j.measurement.2014.09.075.
Mozumder, R. A. and Laskar, A. I. (2015). “Prediction of unconfined compressive strength of geopolymer stabilized clayey soil using artificial neural network.” Computers and Geotechnics, Vol. 69, pp. 291–300, DOI: 10.1016/j.compgeo.2015.05.021.
Olden, J. D., Joy, M. K., and Death, R. G. (2004). “An accurate comparison of methods for quantifying variable importance in artificial neural networks using simulated data.” Ecological Modelling, Vol. 178, No. 3, pp. 389–397, DOI: 10.1016/j.ecolmodel.2004.03.013.
Olden, J. D. and Jackson, D. A. (2002). “Illuminating the black box: A randomization approach for understanding variable contributions in artificial neural networks.” Ecological Modelling, Vol. 154, Nos. 1–2, pp. 135–150, DOI: 10.1016/S0304-3800(02)00064-9.
Park, H. I. and Cho, C. H. (2010). “Neural network model for predicting the resistance of driven piles.” Mar. Georesour. Geotech., Vol. 28, No. 4. pp. 324–344, DOI: 10.1080/1064119X.2010.514232.
Price, J. and Schlotzhauer, S. M. (1999). “Importance of shrinkage and compression in determining water storage changes in peat: The case of a mined peatland.” Hydrol. Process. Vol. 13, No. 16, pp. 2591–2601, DOI: 10.1002/(SICI)1099-1085(199911).
Rahgozar, M. A. and Saberian, M. (2016). “Geotechnical properties of peat soil stabilised with shredded waste tyre chips.” Mires and Peat 18, DOI: 10.19189/MaP.2015.OMB.205.
Rezanezhad, F., Price, J. S., Quinton, W. L., Lennartz, B., Milojevic, T., and Van Cappellen, P. (2016). “Structure of peat soils and implications for water storage, flow and solute transport: A review update for geochemists.” Chemical Geology, Vol. 429, pp. 75–84, DOI: 10.1016/j.chemgeo.2016.03.010.
Sinha, S. K. and Wang, M. C. (2008). “Artificial neural network prediction models for soil compaction and permeability.” Geotech Eng J., Vol. 26, No. 1, pp. 47–64, DOI: 10.1007/s10706-007-9146-3.
Shahin, M. A., Maier, H. R., and Jaksa, M. B. (2004). “Data division for developing neural networks applied to geotechnical engineering.” J. Comput. Civ. Eng., ASCE, Vol. 18, No. 2, pp. 105–14, DOI: 10.1061/(ASCE)0887-3801(2004)18:2(105).
Shahin, M. A., Jaksa, M. B., and Maier, H. R. (2005). “Stochastic simulation of settlement prediction of shallow foundations based on a deterministic artificial neural network model.” Proceedings of the International Congress on Modelling and Simulation, MODSIM 2005, Melbourne, Australia, pp. 73–78.
Shahin, M. A., Jaksa, M. B., and Maier, H. R. (2008). “State of the art of artificial neural networks in geotechnical engineering.” EJGE Special Volume Bouquet 08.
Shi, Y. and Eberhart, R. C. (1999). “Empirical study of particle swarm optimization.” Proceedings of the 1999 Congress on Evolutionary Computation, IEEE, Vol. 3, pp. 1945–1950.
Sun, W. and Xu, Y. (2016). “Using a back propagation neural network based on improved particle swarm optimization to study the influential factors of carbon dioxide emissions in Hebei Province, China.” Journal of Cleaner Production, Vol. 112, pp. 1282–1291, DOI: 10.1016/j.jclepro.2015.04.097.
Tarawneh, B. (2016). “Predicting standard penetration test N-value from cone penetration test data using artificial neural networks.” Geoscience Frontiers, Vol. 8, No. 1, pp. 199–204, DOI: 10.1016/j.gsf.2016.02.003.
Ulusay, R., Tuncay, E., and Hasancebi, N. (2010). “Geo-engineering properties and settlement of peaty soils at an industrial site (Turkey).” Bulletin of Engineering Geology and the Environment, Vol. 69, No. 3, pp. 397–410, DOI: 10.1007/s10064-010-0290-2.
Wehling, T. H., Boulanger, R. W., Arulnathan, R., Harder, L. F. J., and Driller, M. W. (2003). “Nonlinear dynamic properties of a fibrous organic soil.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 129, No. 10, pp. 929–939, DOI: 10.1061/(ASCE)1090-0241(2003)129:10(929).
Wong, L. S., Roslan, H. and Faisal, A. (2008). “Strength and permeability of stabilized peat soil.” J. Appl. Sci., Vol. 8, No. 21, pp. 3986–3990.
Wong, L. S. (2010). Stabilization of peat by chemical binders and siliceous sand, PhD Thesis, University of Malaya, Kuala Lumpur, Malaysia.
Yeganeh-Bakhtiary, A., Houshangi, H., Hajivalie, F., and Abolfathi, S. (2017). “A numerical study on hydrodynamics of standing waves in front of caisson breakwaters with WCSPH model.” Coastal Engineering Journal, Vo. 59, No. 1, pp. 1750005–1-1750005-31, DOI: 10.1142/S057856341750005X.
YTL product data sheet (2008). Chemical compositions of the cement. YTL Cement Marketing Sdn Bhd,Kuala Lumpur, Malaysia.
Zainorabidin, A. and Wijeyesekera, D. C. (2008). “Geotechnical characteristics of peat.” Advances in Computing and Technology. Proceedings of the AC&T 3 rd Annual Conference, University of East London, London, UK, pp. 71–78.
Zhang, J. R., Zhang, J., Lock, T. M., and Lyu, M. R. (2007). “A hybrid particle swarm optimization–backpropagation algorithm for feedforward neural network training.” Appl. Math. Comput. Vol. 185, No. 2, pp. 1026–103, DOI: 10.1016/j.amc.2006.07.025.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dehghanbanadaki, A., Khari, M., Arefnia, A. et al. A Study on UCS of Stabilized Peat with Natural Filler: A Computational Estimation Approach. KSCE J Civ Eng 23, 1560–1572 (2019). https://doi.org/10.1007/s12205-019-0343-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-019-0343-4