Journal of Shanghai Jiaotong University (Science)

, Volume 23, Issue 1, pp 182–189 | Cite as

Non-Linearity of the Mirror Constant for Glasses Fractured in Flexure

  • Lingyue Ma (马凌越)
  • Roberto Dugnani
  • Anthony Moulins
Article
  • 1 Downloads

Abstract

Fractography relies on topographic features on the fracture surfaces to deduce the stress state of the failed component. Traditionally, fractographers assumed that the fracture strength of brittle materials was related to the reciprocal of the square root of the mirror radius linearly, in accordance with the empirical equation formally postulated by Orr in 1972. In this manuscript a novel analytical model to describe the dynamic behavior of elliptical cracks was derived on the basis of thermodynamic principles. Unlike Orr’s equation, the proposed model considered the effects of the plate thickness and it could be used to improve the strength prediction based on the plate’s geometry and material properties. To verify the validity of the model, 39 annealed, 2mm thick, soda-lime silicate glass plates were fractured by four-points bending test and the fracture surfaces were imaged by confocal laser microscope and carefully studied. Excellent agreement was observed between the experimental data and the proposed theoretical framework.

Key words

fractography flexural strength brittle soda-lime silicate glass mirror constant 

CLC number

O 346.1 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors would like to extend their gratitude to Pei Bai from University of Michigan - Shanghai Jiao Tong University Joint Institute for helping with glass annealing.

References

  1. [1]
    ORR L. Practical analysis of fractures in glass windows [J]. Materials Research and Standards, 1972, 12(1): 21–23.MathSciNetGoogle Scholar
  2. [2]
    American Society for Testing and Materials. Standard practice for fractographic analysis of fracture mirror sizes in ceramics and glasses: ASTM C1678-10 [S]. West Conshohocken, PA: American Society for Testing and Materials, 2015.Google Scholar
  3. [3]
    QUINN G D. Guidelines for measuring fracture mirrors [J]. Fractography of Glasses and Ceramics V: Ceramic Transactions, 2007, 199: 163–187.Google Scholar
  4. [4]
    JOSEPH C C, JOHN J M. Use of crack branching data for measuring near-surface residual stresses in tempered glass [J]. Journal of the American Ceramic Society, 1989, 72(9): 1584–1587.CrossRefGoogle Scholar
  5. [5]
    QUINN G D. NIST recommended practice guide: fractography of ceramics and glasses: NIST SP-960-16 [S]. Gaithersburg, MD: Nat. Inst. of Stand. Technol., 2007.CrossRefGoogle Scholar
  6. [6]
    ABDEL-LATIF A, BRADT R, TRESSLER R. Dynamics of fracture mirror boundary formation in glass [J]. International Journal of Fracture, 1977, 13(3): 349–359.Google Scholar
  7. [7]
    AGNETTI S. Strength on cut edge and ground edge glass beams with the failure analysis method [J]. Frattura Ed Integrita trutturale, 2013, 7(26): 31–40 (in Italian).Google Scholar
  8. [8]
    ALARC´ON O E, MEDRANO R E, GILLIS P P. Fracture of glass in tensile and bending tests [J]. Metallurgical and Materials Transactions A, 1994, 25(5): 961–968.CrossRefGoogle Scholar
  9. [9]
    ANSELMI F, MERLO A, BRUSCO G. Methodologia di analisi frattografica dei parabrezza e caratterizzazione della costante di sepecchio [C]//Proceeding of Convegno IGF XIII Cassino 1997. 2008.Google Scholar
  10. [10]
    BALL M, LANDINI D, BRADT R, et al. Fracture mist region in a soda-lime-silica float glass [J]. Fractography of Ceramic and Metal Failures, 1984: 110–120.CrossRefGoogle Scholar
  11. [11]
    BRITTON M. Glass as an engineering material. II. Measuring breaking stresses [J]. Physics in Technology, 1981, 12(6): 258–268.CrossRefGoogle Scholar
  12. [12]
    CHOI S R, GYEKENYESI J P. Crack branching and fracture mirror data of glasses and advanced ceramics [J]. NASA/TM, 1998.Google Scholar
  13. [13]
    DUCKWORTH W, SHETTY D, ROSENFIELD A. Influence of stress gradients on the relationship between fracture stress and mirror size for float glass [J]. Glass Technology, 1983, 24(5): 263–273.Google Scholar
  14. [14]
    DUGNANI R, ZEDNIK R. Flexural strength by fractography in modern brittle materials [J]. Journal of the American Ceramic Society, 2013, 96(12): 3908–3914.CrossRefGoogle Scholar
  15. [15]
    GAUME O, PELLETIER S. Analysis of fracture features for uni-axial bent glass plates [J]. Saint-Gobain Recherche, Technical Document, 2013.Google Scholar
  16. [16]
    GULATI S, BAYNE J, POWELL W, et al. Mirror constant for AMLCD glass [J]. American Ceramic Society Bulletin, 2004, 83(5): 14–15.Google Scholar
  17. [17]
    HAN W T, TOMOZAWA M. Fractographic analysis of hydrothermally treated silica glass [J]. Journal of non-crystalline solids, 1993, 163(3): 309–314.CrossRefGoogle Scholar
  18. [18]
    KERPER M, SCUDERI T. Relation of fracture stress to fracture pattern for glass rods of various diameters [J]. American Ceramic Society Bulletin, 1966, 45(12): 1065–1066.Google Scholar
  19. [19]
    KIMS J, CHOI S J. AMLCD glass mirror constant and crack flaw size in non-crack LCD panels [J]. Journal of Information Display, 2017, 18(1): 19–24.CrossRefGoogle Scholar
  20. [20]
    KIRCHNER H P, CONWAY J. Comparison of the Stress-Intensity and Johnson-and-Holloway Criteria for Crack Branching in Rectangular Bars [J]. Journal of the American Ceramic Society, 1987, 70(8): 565–569.CrossRefGoogle Scholar
  21. [21]
    KIRCHNER H P, KIRCHNER J W. Fracture mechanics of fracture mirrors [J]. Journal of the American Ceramic Society, 1979, 62(3-4): 198–202.CrossRefGoogle Scholar
  22. [22]
    KULP A B. Analysis of strength variation in glass due to ion exchange [D]. Blacksburg: Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, 2012.Google Scholar
  23. [23]
    LIN M H, PAN W W, CHENG P J, et al. The mirror constant of glass substrates by 4PB test [J]. SID Symposium Digest of Technical Papers, 2014, 45(1): 697–700.CrossRefGoogle Scholar
  24. [24]
    LINDQVIST M, LEBET J P. Strength of glass determined by the relation of the critical flaw to the fracture mirror [J]. Engineering Fracture Mechanics, 2014, 119(3): 43–52.CrossRefGoogle Scholar
  25. [25]
    MECHOLSKY J, GONZALEZ A, FREIMAN S. Fractographic analysis of delayed failure in soda-lime glass [J]. Journal of the American Ceramic Society, 1979, 62(11-12): 577–580.CrossRefGoogle Scholar
  26. [26]
    MECHOLSKY J, RICE R. Fractographic analysis of biaxial failure in ceramics [J]. Fractography of Ceramic and Metal Failures, 1984, 185–193.CrossRefGoogle Scholar
  27. [27]
    MECHOLSKY J, RICE R, FREIMAN S. Prediction of fracture energy and flaw size in glasses from measurements of mirror size [J]. Journal of the American Ceramic Society, 1974, 57(10): 440–443.CrossRefGoogle Scholar
  28. [28]
    NORTON M, ATKINSON B. Stress-dependent morphological features on fracture surfaces of quartz and glass [J]. Tectonophysics, 1981, 77(3-4): 283–295.CrossRefGoogle Scholar
  29. [29]
    PISARENKO G, KOZUB Y I, SOLUYANOV V, et al. Determining the strength of brittle materials by means of fracture-surface studies [J]. Strength of Materials, 1975, 7(7): 793–797.CrossRefGoogle Scholar
  30. [30]
    QUINN J B. Extrapolation of fracture mirror and crack-branch sizes to large dimensions in biaxial strength tests of glass [J]. Journal of the American Ceramic Society, 1999, 82(8): 2126–2132.CrossRefGoogle Scholar
  31. [31]
    RUGGERO S A. Quantitative fracture analysis of etched soda-lime silica glass: Evaluation of the blunt crack hypothesis [D]. Gainesville: University of Florida, 2003.Google Scholar
  32. [32]
    SCHWARTZ T A. The fractography of inorganic glass [D]. Cambridge: Department of Materials Science and Engineering, Massachusetts Institute of Technology, 1977.Google Scholar
  33. [33]
    SHAND E. Breaking stress of glass determined from dimensions of fracture mirrors [J]. Journal of the American Ceramic Society, 1959, 42(10): 474–477.CrossRefGoogle Scholar
  34. [34]
    SHAND E B. Strength of glass—the Griffith method revised [J]. Journal of the American Ceramic Society, 1965, 48(1): 43–49.CrossRefGoogle Scholar
  35. [35]
    TERAO N. Sur une relation entre la résistance à la rupture et le foyer d’eclatement du verre [J]. Journal of the Physical Society of Japan, 1953, 8(4): 545–549 (in French).CrossRefGoogle Scholar
  36. [36]
    ZACCARIA M, OVEREND M. Validation of a simple relationship between the fracture pattern and the fracture stress of glass [C]//Proceedings of the Engineered Transparency International Conference at Glasstec. Düsseldorf, Germany: Mendeley, 2012: 1–9.Google Scholar
  37. [37]
    FREUND L B. Dynamic fracture mechanics [M]. Cambridge: Cambridge university press, 1998.Google Scholar
  38. [38]
    ABDEL-LATIF A I A, TRESSLER R E, BRADT R C. Fracture mirror formation in single crystal alumina [J]. Applications and Non-metals, 1977, 3: 933–939.Google Scholar
  39. [39]
    MOTT N. Fracture of metals: some theoretical considerations [J]. Engineering, 1948, 165: 16–18.Google Scholar
  40. [40]
    BANSAL G K. On fracture mirror formation in glass and polycrystalline ceramics [J]. Philosophical Magazine, 1977, 35(4): 935–944.CrossRefGoogle Scholar
  41. [41]
    American Society for Testing and Materials. Standard test methods for strength of glass by flexure (determination of modulus of rupture): ASTM C158-02 [S]. West Conshohocken, PA: American Society for Testing and Materials, 2012.Google Scholar
  42. [42]
    HULL D. Fractography: observing, measuring and interpreting fracture surface topography [M]. Cambridge: Cambridge University Press, 1999.Google Scholar
  43. [43]
    LOPEZ-CEPERO J, DE ARELLANO-LOPEZ A, QUISPE-CANCAPA J, et al. Confocal microscopy for fractographical surface characterization of ceramics [J]. Microscopy and Analysis, 2005, 19(5): 13–15.Google Scholar
  44. [44]
    DUGNANI R, ZEDNIK R J. Geometric description of fracture surface features in isotropic brittle solids [J]. Engineering Fracture Mechanics, 2016, 165: 87–97.CrossRefGoogle Scholar
  45. [45]
    NEWMAN J C, RAJU I S. Stress Intensity Factor Equations for Cracks in Three-Dimensional Finite Bodies Subjected to Tension and Bending Loads [J]. Astm Stp, 1983.Google Scholar
  46. [46]
    WIEDERHORN S M. Fracture surface energy of glass [J]. Journal of the American Ceramic Society, 2010, 52(2): 99–105.CrossRefGoogle Scholar
  47. [47]
    DWIVEDI P, GREEN D J. Indentation crack -shape evolution during subcritical crack growth [J]. Journal of the American Ceramic Society, 1995, 78(5): 1240–1246.CrossRefGoogle Scholar
  48. [48]
    SHERMAN D, BE’ERY I. Shape and energies of a dynamically propagating crack under bending [J]. Journal of Materials Research, 2003, 18(10): 2379–2386.CrossRefGoogle Scholar
  49. [49]
    SNEDDON I N. Fourier transformations [M]. New York: McGraw-Hill, 1951.Google Scholar
  50. [50]
    FINEBERG J, MARDER M. Instability in dynamic fracture [J]. Physical Review Letters, 1991, 67(4): 457–460.CrossRefGoogle Scholar
  51. [51]
    YOFFE E H. The moving Griffith crack [J]. The Philosophical Magazine, 1951, 42(7): 739–750.MathSciNetMATHGoogle Scholar
  52. [52]
    MECHOLSKY J J, FREIMAM SW, RICE RW. Fracture surface analysis of ceramics [J]. Journal of Materials Science, 1976, 11(7): 1310–1319.CrossRefGoogle Scholar

Copyright information

© Shanghai Jiaotong University and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Lingyue Ma (马凌越)
    • 1
  • Roberto Dugnani
    • 1
  • Anthony Moulins
    • 2
  1. 1.University of Michigan - Shanghai Jiao Tong University Joint InstituteShanghai Jiao Tong UniversityShanghaiChina
  2. 2.Ecole de Technologie SupérieureMontrealCanada

Personalised recommendations