Abstract
Spray coating is a facile deposition process with numerous existing and emerging applications. However, spray coating is a stochastic process comprising impingement of many droplets which upon impact on a heated substrate may dry or solidify individually or coalesce first to form a thin liquid film and then dry to yield a thin solid film. There is very limited knowledge on how this process occurs; therefore in this work, high speed imaging is used to visualize the spray coating process. Two model solutions including food-dye with properties like those of water, and poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT:PSS), a polymeric solution, are sprayed onto permeable glossy paper and regular impermeable glass substrates. Substrates are kept at room temperature and 80 °C elevated temperature. In some cases, a vertical ultrasonic vibration is imposed on the substrate to study its effect on the coating process. It is observed that the spray coating process is highly random and stochastic. A higher substrate temperature results in a better coating process in that a more uniform and defect-free coating forms. Imposed vibration in the case of glossy paper substrates results in better droplet spreading and more uniform coating. The results also show that under the conditions of these experiments, impinged droplets dry individually or as islands of multiple coalesced droplets to form a coating. In other words, at used spray flow rate and spray droplet size, a continuous thin liquid film does not form prior to drying even at room temperature. Further systematic studies and high magnification lenses are required to visualize and understand the details of the process.
Similar content being viewed by others
References
ASHGRIZ N. Handbook of atomization and sprays: Theory and applications [M]. Berlin: Springer, 2011.
ESLAMIAN M. Spray-on thin film PV solar cells: Advances, potentials and challenges [J]. Coatings, 2014, 4: 60–84.
ESLAMIAN M. Inorganic and organic solutionprocessed thin film devices [J]. Nano-Micro Letters, 2017, 9: 3.
LI R, ASHGRIZ N, CHANDRA S. Droplet generation from pulsed micro-jets [J]. Experimental Thermal and Fluid Science, 2008, 32(8): 1679–1686.
YARIN A L. Drop impact dynamics: Splashing, spreading, receding, bouncing [J]. Annual Review of Fluid Mechanics, 2006, 38: 159–192.
ROISMAN I V, RIOBOO R, TROPEA C. Normal impact of a liquid drop on a dry surface: Model for spreading and receding [J]. Proceedings of the Royal Society A: Mathematical Physical and Engineering Sciences, 2002, 458: 1411–1430.
ALIZADEH PAHLAVAN A, CUETO-FELGUEROSO L, MCKINLEY G H, et al. Thin films in partial wetting: Internal selection of contact-line dynamics [J]. Physical Review Letters, 2015, 115: 034502.
BIRD J C, MANDRE S, STONE H A. Short-time dynamics of partial wetting [J]. Physical Review Letters, 2008, 100: 234501.
KOLINSKI J M, MAHADEVAN L, RUBINSTEIN S M. Drops can bounce from perfectly hydrophilic surfaces [J]. Europhysics Letters, 2014, 108: 24001.
IKEGAWA M, AZUMA H. Droplet behaviors on substrates in thin-film formation using ink-jet printing [J]. JSME International Journal, Series B, 2014, 47(3): 490–496.
PASANDIDEH-FARD M, QIAO Y M, CHANDRA S, et al. Capillary effects during droplet impact on a solid surface [J]. Physics of Fluids, 1996, 8(3): 650–658.
BERNARDIN J D, STEBBINS S J, MUDAWAR I. Mapping of impact and heat transfer regimes of water drops impinging on a polished surface [J]. International Journal of Heat and Mass Transfer, 1997, 40(2): 247–267.
RIOBOO R, MARENGO M, TROPEA C. Time evolution of liquid drop impact onto solid, dry surfaces [J]. Experiments in Fluids, 2002, 33(1): 112–124.
ŠIKALO Š, GANIC E N. Phenomena of dropletsurface interactions [J]. Experimental Thermal and Fluid Science, 2006, 31(2): 97–110.
SOLTANI-KORDSHULI F, ESLAMIAN M. Impact dynamics and deposition of pristine and graphenedoped PEDOT: PSS polymeric droplets on stationary and vibrating substrates [J]. Experimental Thermal and Fluid Science, 2017, 89: 238–248.
ROISMAN I V, PRUNET-FOCH B, TROPEA C, et al. Multiple drop impact onto a dry solid substrate [J]. Journal of Colloid and Interface Science, 2002, 256(2): 396–410.
LI R, ASHGRIZ N, CHANDRA S, et al. Coalescence of two droplets impacting a solid surface [J]. Experiments in Fluids, 2010, 48(6): 1025–1035.
DALILI A, CHANDRA S, MOSTAGHIMI J, et al. Formation of liquid sheets by deposition of droplets on a surface [J]. Journal of Colloid and Interface Science, 2014, 418: 292–299.
WU J, HUANG J J, YAN W W. Lattice Boltzmann investigation of droplets impact behaviors onto a solid substrate [J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015, 484: 318–328.
RAMAN K A, JAIMAN R K, LEE T S, et al. Lattice Boltzmann study on the dynamics of successive droplets on a solid surface [J]. Chemical Engineering Science, 2016, 145: 181–195.
SAROJINI KG K, DHAR P, VARUGHESE A, et al. Coalescence dynamics of PEDOT: PSS droplets impacting at offset on substrates for inkjet printing [J]. Langmuir, 2016, 32(23): 5838–5851.
ESLAMIAN M, SOLTANI-KORDSHULI F. Development of multiple-droplet drop-casting method for the fabrication of coatings and thin solid films [J]. Journal of Coatings Technology and Research, 2017. https://doi.org/10.1007/s11998-017-9975-9 (published online).
LABERGUE A, GRADECK M, LEMOINE F. Experimental investigation of spray impingement hydrodynamic on a hot surface at high flow rates using phase Doppler analysis and infrared thermography [J]. International Journal of Heat and Mass Transfer, 2016, 100: 65–78.
KALANTARI D, TROPEA C. Spray impact onto flat and rigid walls: Empirical characterization and modelling [J]. International Journal of Multiphase Flow, 2007, 33(5): 525–544.
YOON S S, DESJARDIN P E, PRESSER C, et al. Numerical modeling and experimental measurements of water spray impact and transport over a cylinder [J]. International Journal of Multiphase Flow, 2006, 32(1): 132–157.
ZABIHI F, ESLAMIAN M. Characteristics of thin films fabricated by spray coating on rough and permeable paper substrates [J]. Journal of Coatings Technology and Research, 2015, 12: 489–503.
ZABIHI F, ESLAMIAN M. Substrate vibrationassisted spray coating (SVASC): Significant improvement in nano-structure, uniformity, and conductivity of PEDOT: PSS thin films for organic solar cells [J]. Journal of Coatings Technology and Research, 2015, 12: 711–719.
CHEN Q, ZABIHI F, ESLAMIAN M. Improved functionality of PEDOT:PSS thin films via graphene doping, fabricated by ultrasonic substrate vibrationassisted spray coating [J]. Synthetic Metals, 2016, 222: 309–317.
RAHIMZADEH A, ESLAMIAN M. Stability of thin liquid films subjected to ultrasonic vibration and characteristics of the resulting thin solid films [J]. Chemical Engineering Science, 2017, 158: 587–598.
ESLAMIAN M. Excitation by acoustic vibration as an effective tool for improving the characteristics of the solution-processed coatings and thin films [J]. Progress in Organic Coatings, 2017, 113: 60–73.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: the Oriental Scholar Fund Supported by Shanghai Municipal Education Commission, and the National Natural Science Foundation of China (No. 51550110229)
Rights and permissions
About this article
Cite this article
Huang, J., Yuan, Z., Gao, S. et al. Understanding Spray Coating Process: Visual Observation of Impingement of Multiple Droplets on a Substrate. J. Shanghai Jiaotong Univ. (Sci.) 23, 97–105 (2018). https://doi.org/10.1007/s12204-018-1914-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12204-018-1914-0