The potential of WHR/batch and cullet preheating for energy efficiency in the EU ETS glass industry and the related energy incentives
- 50 Downloads
The European Emissions Trading Scheme (EU ETS) covers approximately 45% of European greenhouse gases (GHGs), 11,000 stationary installations as well as aircraft operators. The EU ETS particularly affects the energy-intensive industries while it imposes a significant risk of “carbon leakage,” i.e., the risk of EU industry departing to countries with weaker restraints on GHG emissions. The EU glass industry, being capital intensive and also requiring long investment cycles, is the world’s largest glass producer with a market share close to one third of global production. Therefore, it is of significant importance to view the position of the EU ETS glass industry in terms of energy conservation possibilities. The present paper utilizes a vertical approach to provide information on both ETS market evolution and specific technical information to support technological innovation to the glass industry. EU ETS glass industry is analyzed regarding the balance between allocated European Union emission allowances (EUAs), verified CO2 emissions, and potential shortfall in allowances so as to determine the situation of glass industries and the extent of urge for energy-saving activities towards the strengthening of their position within the requirements of the EU ETS phase III. The replication potential of waste heat recovery (WHR) through batch preheating is specifically addressed since it is considered a promising technology according to the latest Best Available Techniques (BAT) reference document for the glass industry under Directive IED 2010/75/EU. A case study for a container glass furnace based on simulation results is presented investigating the impact of different operating and design configurations on specific energy consumption and CO2 emissions.
KeywordsEU emissions trading Glass industry Energy saving Waste heat recovery
The present work was conducted as part of the “CO2-Glass” project under the Competitiveness & Innovation Framework Programme (CIP) Entrepreneurship & Innovation Programme 2007-2013 (EIP) of the European Commission DG ENTERPRISE AND INDUSTRY Sustainable Industry Low Carbon Scheme Short term innovation measures – SILC I – Action 67/G/ENT/CIP/13/D/N03S02.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- Alexander J. C. (2009). Electrostatic batch preheating technology: E-Batch. 61st conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons 244, p 37.Google Scholar
- Barklage-Hilgefort, H. (2009). Batch preheating on container glass furnaces. In: 69th conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons, 30, p 133.Google Scholar
- Barrickman, L. et al. (2009). Experience with cullet filter/preheater. 67th conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons; 28, p 117.Google Scholar
- Beerkens, R. (2009a). Energy balances of glass furnaces: parameters determining energy consumption of glass melt processes. In: 67th conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons 28, p. 103.Google Scholar
- Beerkens R. (2009b). Energy saving options for glass furnaces and recovery of heat from their flue gases and experiences with batch and cullet pre-heaters applied in the glass industry. In: 69th conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons, 30 p 143.Google Scholar
- Beutin, E. et al. (2009). Long-term experience with Nienburger Glas batch preheating systems. In: 60th Conference on Glass Problems: Ceramic Engineering & Science Proceedings. John Wiley & Sons, 232, p 109.Google Scholar
- Carbon Finance – World Bank 2007, 2008, 2009, 2010, 2012 State and trends of the carbon market.Google Scholar
- Carbon Market Monitor. (2016). Review of global markets in 2015 and outlook for 2016–2018. Thomson Reuters Report.Google Scholar
- CEPS (2016). CEPS, ECOFYS, Economisti Associati, June 2016, Framework Contract NO 409/PP/2014/FC LOT 1 Final report composition and drivers of energy prices and costs: case studies in selected energy-intensive industries.Google Scholar
- Ceramic industry. (2016) Glass container market expected to see steady growth in Europe through 2020 (http://www.ceramicindustry.com/). Accessed March 2016.
- de Bruyn, S. et al. (2016). Study on calculation of additional profits of sectors and firms from the EU – ETS, Delft, CE Delft.Google Scholar
- DG for Climate Action. (2016a). European Commission, Directorate-General for Climate Action, Kyoto 1st commitment period 2008–2012 (http://ec.europa.eu/clima/policies/. Accessed March 2016).
- DG for Climate Action. (2016b) European Commission, Directorate-General for Climate Action, Free allocation based on benchmarks (http://ec.europa.eu/clima/policies/. Accessed March 2016).
- DG for Climate Action (2016c) Revision for phase 4 (2021–2030) (http://ec.europa.eu/clima/policies/. Accessed March 2016].
- Dolianitis, I., Giannakopoulos, D., Hatzilau, C. S., Karellas, S., Kakaras, E., Nikolova, E., Skarpetis, G., Christodoulou, N., Giannoulas, N., & Zitounis, T. (2016). Waste heat recovery at the glass industry with the intervention of batch and cullet preheating. Thermal Science, 20(4), 1245–1258. https://doi.org/10.2298/TSCI151127079D.CrossRefGoogle Scholar
- ECORYS. (2013), Carbon leakage evidence project, factsheets for selected sectors, 9/2013.Google Scholar
- EEA. (2015). Trends and projections in the EU ETS in 2015, European Environment Agency (EEA) Tech.Report 4/2015.Google Scholar
- EEA. (2017a). European Environment Agency EEA, 2016, ‘EU Emissions Trading System (ETS) data viewer’ (http://www.eea.europa.eu/data-and-maps/ accessed January 2017).
- EEA. (2017b) European Environment Agency EEA, 2016, GHG data viewer (http://www.eea.europa.eu/data-and-maps/data/data-viewers/greenhouse-gases-viewer. Accessed October 2017).
- Ellerman and Joskow, (2008). The European Union’s Emissions Trading System in perspective, IT, Pew Center Global Climate Change.Google Scholar
- EU Commission (2017). DG Clima. The EU ETS. Phases 1 and 2 (2005–2012). Evolution of the EU Carbon Market. (https://ec.europa.eu/clima/. Accessed March 2017).
- EU Commission. (2010). Commission Decision 2010/2/EU of 24 Dec. 2009 determining, pursuant to Directive 2003/87/EC, a list of sectors and subsectors which are deemed to be exposed to a significant risk of carbon leakage.Google Scholar
- EU Commission. (2011) Commission Decision 2011/278/EC determining transitional union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council.Google Scholar
- EU Commission. (2012). Commission Decision 2012/498/EC amending decisions 2010/2/EU and 2011/278/EU as regards the sectors and subsectors which are deemed to be exposed to a significant risk of carbon leakage.Google Scholar
- EU Commission. (2014). Commission Decision 2014/746/EC determining, pursuant to Directive 2003/87/EC of the European Parliament and of the Council, a list of sectors and subsectors which are deemed to be exposed to a significant risk of carbon leakage, for the period 2015 to 2019 (EU Commission, Climate Action - Evolution of the European carbon market 2017).Google Scholar
- EU Commission. (2015) SWD(2015)135 final, impact assessment, commission staff working document accompanying the document proposal for a directive of the EU parliament and of the council amending Directive 2003/87/EC to enhance cost-effective emission reductions and low carbon investments.Google Scholar
- EU Council (2014). European council conclusions. 23/24 Oct 2014.Google Scholar
- EU Council. (2017). Outcome of proceedings, 6841/17, 1st March 2017.Google Scholar
- EU Economic and Social Committee. (2015). Opinion of the European economic and social committee on an industrial policy for the European glass sector, 22/4/2015, CCMI/127 – EESC-2014-04990-00-00-AC-TRA (EN) 1/9.Google Scholar
- EU Parliament. (2017). Report on the proposal for a directive of the European Parliament and of the Council amending Directive 2003/87/EC to enhance cost-effective emission reductions and low-carbon investments (COM(2015)0337 – C8-0190/2015 – 2015/0148(COD)), Committee on the Environment, Public Health and Food Safety, Plenary sitting 13/1/2017.Google Scholar
- European Commission. (2009). Methodology for the free allocation of emission allowances in the EU ETS post 2012, Sector report for the glass industry, Study Contract: 07.0307/2008/515770/ETU/C2 ordered by the European Commission, 11/2009.Google Scholar
- EUTL. (2016). European Union transaction log (http://ec.europa.eu/environment/ets/. Accessed 5/2016).
- FEVE. (2016). Federation of European manufacturers of glass containers and machine-made glass tableware, information gathered through direct communication.Google Scholar
- Frassine C., Rohde C., & Hirzel S. (2016). Energy saving options for industrial furnaces—the example of the glass industry, ECEEE Industrial Summer Study Proceedings.Google Scholar
- FTI Consulting. (2015). Energy Flash, The EU Emission Trading System, FTI Consulting LLP.Google Scholar
- GAE. (2016). Glass Alliance Europe, the European Alliance of Glass Industries. http://www.glassallianceeurope.eu, Accessed April 2016.
- Glass Alliance Europe. (2016). the European Alliance of Glass Industries. http://www.glassallianceeurope.eu. Accessed 4/2016.
- Glass for Europe. (2016). Glass for Europe Trade Association. http://www.glassforeurope.com. Accessed 3/2016).
- Glass Market. (2015). Glass Market in Europe 2015–2019, October 2015 Report (http://www.researchandmarkets.com/, accessed 3/ 2016).
- Glüsing, A. K. (2009). Preheating devices for future glass making, a 2nd generation approach. In: 67th conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons, 28, p 149–164.Google Scholar
- Herzog, J., & Settimio, R. J. (2008). Cullet preheating: the realistic solution for all glass furnaces with cullet addition. Proceedings of the 52nd conference on glass problems: ceramic engineering and science proceedings, John Wiley & Sons 2008, 13, pp 82–90.Google Scholar
- Hibscher C., et al., (2009). The fluidized bed glass batch preheater. In: 46th conference on glass problems: ceramic engineering and science proceedings, Volume 7, John Wiley & Sons, p. 482.Google Scholar
- ICF. (2015). Study on energy efficiency and energy saving potential in industry from possible policy mechanisms, ICF Consulting Limited, 1/12/15.Google Scholar
- ILO. (2015). The glass industry: recent trends and changes in working conditions and employment relations. Geneva: © International Labour Organization.Google Scholar
- Infiniti Research, 2016. Europe Glass Market Report, Infiniti Research Ltd. (http://www.technavio.com, accessed 3/2016).
- JRC (2010) Energy efficiency and CO2 emissions: prospective scenarios for the cement industry, J.A. Moya, N. Pardo, A. Mercier, JRC Scientific and Technical Papers 2010.Google Scholar
- JRC (2013). Best Available Techniques (BAT) reference document for the manufacture of glass.Google Scholar
- Laing T. et al, (2013). Assessing the effectiveness of the EU Emissions Trading System, January 2013, Center for Climate Change Economics and Policy, Working Paper No 126, Grantham Research Institute on Climate Change and the Environment, Working Paper No 106.Google Scholar
- Official Journal of the European Union. 2009. Directive 2009/29/EC of the European Parliament and of the Council of 23 April 2009 amending Directive 2003/87/EC so as to improve and extend the greenhouse gas emission allowance trading scheme of the community.Google Scholar
- Packaging Today. (2016). Packaging Today e-Magazine Article “A toast to Glass Packaging” (http://www.packagingtoday.co.uk, accessed March 2016).
- POINTCARBON. (2012) (www.pointcarbon.com accessed in 2012).
- Research and Markets, 2015, Europe glass containers market-by countries and vendors-market trends and forecasts (2014–2020), (http://www.researchandmarkets.com/, accessed December 2015).
- Research and Markets. (2016). Global flat glass market 2015–2019, February 2015 Report (http://www.researchandmarkets.com/, accessed March 2016).
- Ross, C. P. (2009). Current glass furnace air emission compliance issues. Ceramic Engineering and Science Proceedings 2009, p. 215.Google Scholar
- Rue, D. et al. (2014). Thermochemical recuperation to increase glass furnace energy efficiency. In: 74th conference on glass problems. John Wiley & Sons, Inc., p. 81–92.Google Scholar
- Scalet, B. M., et al. (2013). Best Available Techniques reference document for the manufacture of glass.Google Scholar
- Van Limpt H., et al. (2013). Energy recovery from waste heat in the glass industry & thermo chemical recuperator. In: 73rd conference on glass problems: ceramic engineering and science proceedings, Volume 34, John Wiley & Sons, p. 37.Google Scholar
- Worrell E. et al., 2008. Energy efficiency improvement and cost saving opportunities for the glass industry. An energy star guide for energy and plant managers, Lawrence Berkeley National Laboratory.Google Scholar
- Zippe. (2011). Recent developments of batch and cullet preheating in Europe—practical experiences and implications. In: 71st conference on glass problems: ceramic engineering and science proceedings. John Wiley & Sons, 32, pp. 1–18.Google Scholar
- Zippe. 2016, 1st Batch preheater on the African continent, http://www.zippe.de/, accessed February 2016).
- Zourou, K., et al. (2013). Energetic and exergetic assessment of waste heat recovery systems in glass industry. In: ASME- ORC 2013. 2nd Int. Seminar on ORC Power Systems 10/ 2013, DeDoelen, Rotterdam, The Netherlands.Google Scholar