Skip to main content

Advertisement

Log in

On the investigation of energy saving aspects of commercial lifts

  • Original Article
  • Published:
Energy Efficiency Aims and scope Submit manuscript

Abstract

This paper investigates energy efficiency issues in modern lifts, based on the VDI 4707 guidelines, in the context of “KLEEMANN-LESS” research project, funded by national resources and the EU. The above analysis is applied to various lift types manufactured by the Greek multinational company ΚLEEMAN HELLAS. The obtained results indicate the relationship between critical technical parameters, such as the elevator driving system type and the standby energy consumption, according to the aforementioned standard. Furthermore, in the current work, new techniques for energy savings are proposed, employing realistic scenarios, which significantly enhance energy efficiency. Experimental work shows that an energy saving of up to 40% can be achieved. The outputs of the current work are not limited to lift models manufactured by KLEEMAN HELLAS, but concern the majority of lift manufacturers as well.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

References

  • Almeida, A. D., Hirzel, S., Patrão, C., Fong, J., & Dütschke, E. (2012). Energy-efficient elevators and escalators in Europe: an analysis of energy efficiency potentials and policy measures. Energy and Buildings, Elsevier., 47, 151–158.

    Article  Google Scholar 

  • Azib, T., Bethoux, O., Remy, G., & Marchand, C. (2011). Saturation management of a controlled fuel-cell/ultracapacitor hybrid vehicle. IEEE Transactions on Vehicular Technology., 60(9), 4127–4138.

    Article  Google Scholar 

  • Barney, G. (2003). Vertical transportation in tall buildings. Elevator World, LI(5), 66–75.

    Google Scholar 

  • Ceuca, E., Tulbure, A., Risteiu, M. (2010). The evaluation of Regenerative Braking energy. 2010 I.E. 16th International Symposium for Design and Technology of Electronics Packages. art. no. 5653739, 65–68.

  • CIBSE (2005). Guide D Transportation systems in buildings.

  • E4 Project (2010). Energy efficient elevators and escalators.

  • Emadi, A., Lee, Y. J., & Rajashekara, K. (2008). Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles. IEEE Transactions on Industrial Electronics., 55(6), 2237–2245.

    Article  Google Scholar 

  • Goldstein, D. B., & Eley, C. (2014). A classification of building energy performance indices. Springer Energy Efficiency, 7, 353–375.

    Article  Google Scholar 

  • Howkins, R. (2006). Elevator ride quality—the human ride experience. Elevator Technology, 16 , 100–110.Proc. Of ELEVCON

    Google Scholar 

  • Inoue, K., Ogata, K., Kato, T. (2008). An efficient induction motor drive method with a regenerative power storage system driven by an optimal torque. PESC Record - IEEE Annual Power Electronics Specialists Conference. art. no. 4591955, 359–364.

  • ISO 18738 (2003). Lifts (Elevators)—Measurement of lift ride quality.

  • ISO 25745-2:2015 (2015). Energy performance of lifts, escalators and moving walks—Part 2: Energy calculation and classification for lifts (elevators).

  • Lu, L., Semail, E., Kobylanski, L., Kestelyn, X. (2011). Flux-weakening strategies for a five-phase PM synchronous machine. Proceedings of the 2011 14th European Conference on Power Electronics and Applications, EPE 2011, Conference CD-ROM Proceedings.

  • Marchesoni, M., & Vacca, C. (2007). New DC–DC converter for energy storage system interfacing in fuel cell hybrid electric vehicles. IEEE Transactions on Power Electronics., 22(1), 301–308.

    Article  Google Scholar 

  • Minav, T., Immonen, P., Laurila, L., Vtorov, V., Pyrhonen, J., & Niemela, M. (2011). Electric energy recovery system for a hydraulic forklift—theoretical and experimental evaluation. IET Electric Power Applications., 5(4), 377–385.

    Article  Google Scholar 

  • Mitronikas, Ε., Spyropoulos, D., Papanikolaou, N., Tatakis, E., & Spyropoulos, N. (2014). Energy saving during modern lift operation. Berlin, Germany: XXIth International Conference on Electrical Machines (ICEM 2014).

    Book  Google Scholar 

  • Mutoh, N., Hayano, Y., Yahagi, H., & Takita, K. (2007). Electric braking control methods for electric vehicles with independently driven front and rear wheels. IEEE Transactions on Industrial Electronics., 5(2), 1168–1176.

    Article  Google Scholar 

  • Nipkow, J. (2005). Electricity consumption and efficiency potentials of lifts. Report of Swiss agency for efficient energy use S.A.F.E. Zurich: HTW Chur University of Applied Sciences.

    Google Scholar 

  • Oliveira, J.G., Lundin, J., Bernhoff, H. (2011). Power balance control in an AC/DC/AC converter for regenerative braking in a two-voltage-level flywheel-based driveline. International Journal of Vehicular Technology. doi:10.1155/2011/934023.

  • Papanikolaou, N., Karatzaferis, J., Loupis, M., & Tatakis, E. (2013). Theoretical and experimental investigation of brake energy recovery in industrial loads. Energy and Power Engineering., 5, 459–473.

    Article  Google Scholar 

  • Shah, V. A., Mistry, D. J., Kundu, P., & Maheshwari, R. (2012). Single interrupt control and regenerative braking of PMBLDC motor for electric vehicles. International Journal of Vehicle Structures and Systems., 4(1), 10–17.

    Article  Google Scholar 

  • Spyropoulos, N., Asvestopoulos, L. (2008). Hydraulic vs. Traction Lifts: Environment Friendliness and Quality of Service to the User. Elevator Technology 17, Proc. of ELEVCON.

  • VDI 4707 (2007). Lifts – Energy efficiency.

  • Yang, H., Sun, W., & Xu, B. (2007). New investigation in energy regeneration of hydraulic elevators. IEEE/ASME Transactions on Mechatronics, 12(5), 519–526.

    Article  Google Scholar 

  • Yang, M., Jhou, H., Ma, B., & Shyu, K. (2009). A cost-effective method of electric brake with energy-regeneration for electric vehicles. IEEE Transactions on Industrial Electronics., 56(6), 2203–2212.

    Article  Google Scholar 

  • Zarikas, V., Papanikolaou, N., Loupis, M., & Spyropoulos, N. (2013). Intelligent decisions modeling for energy saving in lifts: an application for Kleemann Hellas elevators. Energy and Power Engineering., 5, 236–244.

    Article  Google Scholar 

  • Zhang, X., Dong, Z., & Crawford, C. (2011). Hybrid energy storage system for hybrid and electric vehicles: review and a new control strategy. ASME 2011 International Traction Engineering Congress and Exposition, 4 (PARTS A AND B), 91–101.

    Article  Google Scholar 

  • Zhou, N., Mcneil, M., & Levine, M. (2012). Assessment of building energy-saving policies and programs in China during the 11th five-year plan. Springer Energy Efficiency, 5, 51–64.

    Article  Google Scholar 

Download references

Acknowledgement

This work has been supported by the research program “Less energy consumption in elevators (LESS)”, Project Code 09SYN-32-829, within the Greek Research Activity “COOPERATION.” This is co-financed by the European Union (European Social Fund) and Greek national funds.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ν. Papanikolaou.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Papanikolaou, Ν., Loupis, M., Spiropoulos, Ν. et al. On the investigation of energy saving aspects of commercial lifts. Energy Efficiency 10, 945–956 (2017). https://doi.org/10.1007/s12053-016-9495-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12053-016-9495-y

Keywords

Navigation