Abstract
To overcome the current difficulties of high-precision machining and the high manufacturing and maintenance costs of spherical seals for deep-water drilling ball joints, a new spherical seal technique is proposed in this paper. The spherical seal is mainly composed of silicone rubber and polytetrafluoroethylene (PTFE). Rational structural design makes the seal independent from the ball and other components, making it easy to replace if leakage occurs at its surface. PTFE can elastically deform over a certain deformation range, which guarantees that two sealing surfaces fit tightly together. O-Ring and PTFE elasticity makes up for any lack of accuracy during spherical machining and decreases the machining precision requirements for spherical surfaces. Using a finite element technique and nonlinear theory, the performance of the spherical seal under the influence of various factors is determined. The results show that the spherical seal designed in this paper exhibits excellent sealing performance under low-temperature and high-pressure conditions. The spherical seal, a combination of an O-ring and PTFE, has the advantages of cheap manufacturing and maintenance costs and excellent sealing performance.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Akulichev AG, Alcock B, Echtermeyer AT (2017) Elastic recovery after compression in HNBR at low and moderate temperatures: experiment and modelling. Polym Test 61(2):46–56. https://doi.org/10.1016/j.polymertesting.2017.05.003
Babuska TF, Pitenis AA, Jones MR, Nation BL, Sawyer WG, Argibay N (2016) Temperature-dependent friction and wear behavior of PTFE and MoS2. Tribol Lett 63(2):15. https://doi.org/10.1007/s11249-016-0702-y
Batra RC, Ching HK (2002) Energy release rates in a constrained epoxy disc with Hookean and Mooney–Rivlin materials. Theor Appl Fract Mech 38(2):165–175. https://doi.org/10.1016/s0167-8442(02)00085-x
Bernard AO, Hawong JS, Shin DC, Dong B (2015) Contact behavior analysis of elastomeric x-ring under uniform squeeze rate and internal pressure before and after forcing-out using the photoelastic experimental hybrid method. J Mech Sci Technol 29(5):2157–2168. https://doi.org/10.1007/s12206-015-0436-z
Borst RD, Crisfield MA, Remmers JJC, Verhoosel CV, 1993. Non-linear finite element analysis of solids and structures. Wiley,31–32,91–96. DOI: https://doi.org/10.1002/9781118375938.ch2
Cornelius DJ, Monroe CM (2010) The unique properties of silicone and fluorosilicone elastomers. Polym Eng Sci 25(8):467–473. https://doi.org/10.1002/pen.760250807
Feng YL, Zhang WM, Feng FZ (2006) Design and strength analysis of a spherical connector for lifting subsystem in deep sea mining system. China Ocean Eng 20(4):605–613. https://doi.org/10.3321/j.issn:0890-5487.2006.04.008
Flitney B (2005) Extending the application of fluorosilicone elastomers. Seal Technol 2005(2):6–11. https://doi.org/10.1016/S1350-4789(05)00519-2
Fowler JR, Gardner TN (1980) Criterion for allowable lower ball joint angle in floating drilling. J Energy Resour Technol 102(4):242–250. https://doi.org/10.1115/1.3227884
HANES JWE, 1969. Flexible connectors. United States Patent, 3433504. March 18, 1969
Jahani K, Mahmoodzade H (2014) Predicting the dynamic material constants of Mooney-Rivlin model in broad frequency range for elastomeric components. Lat Am J Solids Struct 11(11):1983–1998. https://doi.org/10.1590/s1679-78252014001100005
Jaunich M, Stark W, Wolff D (2010) A new method to evaluate the low temperature function of rubber sealing materials. Polym Test 29(7):815–823. https://doi.org/10.1016/j.polymertesting.2010.07.006
Karimi A, Navidbakhsh M (2015) Mechanical properties of PVA material for tissue engineering applications. Mater Technol 29(2):90–100. https://doi.org/10.1179/1753555713y.0000000115
Kozik TJ, Lovell JE, Ertas A (1990) Upper ball joint force variations due to riser tensioner and vessel motions—part I: derivation of general equations. J Energy Resour Technol 112(3):200–207. https://doi.org/10.1115/1.2905757
Moog O, 2003. Simple flexible joint for high pressure and high temperature. United States Patent Application Publication, US 2003/0016925 A1. Jan. 30, 2003
Mooney MA (1940) Theory of large elastic deformation. J Appl Phys 11(9):582–592. https://doi.org/10.1063/1.1712836
Moses CJ, Hogan ME, Moses PS, Pottorff TM, Spicer CC, 2008. High temperature flexible pipe joint. United States Patent, US 7341283 B2. Mar. 11, 2008. DOI: https://doi.org/10.1016/S1003-6326(10)60274-9
Povloski Duy B, 2014. Freestanding hybrid riser system including a bottom configuration with a flexible pipe joint and a diverless pipe connector. International Application Published Under the Patent Cooperation Treaty (PCT), WO 2014/043126 A2. Mar. 20, 2014
SHI SX, 2006. Universal spherical connector. China Patent, CN 2851787 Y, 2006-12-27. (in Chinese)
Song XG, Wang L, ChulPARK Y (2009) Analysis and optimization of nitrile butadiene rubber sealing mechanism of ball valve. Chin J Nonferrous Met 19(s1):220–224
Tan Q, Yuan JL, Deng JG (2013) Study on the variation of corner and load on bottom ball joint of deep-water drilling riser. Int Conf Machinery 318:547–550. https://doi.org/10.4028/www.scientific.net/amm.318.547
WAN RN, 2014. Multi-direction spherical sealing rotary joint. China Patent, CN 103672244 A, 2014-03-26. (in Chinese)
Wang W, Deng T, Zhao SG, 2004. Determination of material constants in rubber Mooney-Rivlin model, Spec Rubber Products, 25(4):8–10. (in Chinese). DOI: https://doi.org/10.3969/j.issn.1005-4030.2004.04.003
Watkins BJ, Regan AM, Slota WP, 1976. Flexible supportive joint for sub-sea riser flotation means. United States Patent, 3952526. Apr. 27, 1976
Zhang RQ, Zhan YB, 1990. Nonlinear finite element analysis. Chongqing, China, Chongqing University Press, 101–107;190–196. (in Chinese)
Zuthem EV, DeBoer M, Walton SA, 2000. Flexible pipe joint and method of installing underwater pipes. United States Patent, 6109662. Aug. 29, 2000
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hou, Y., Tang, Q., Wu, Z. et al. Structural Design and Performance Analysis of a Deep-Water Ball Joint Seal. J. Marine. Sci. Appl. 17, 224–232 (2018). https://doi.org/10.1007/s11804-018-0030-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11804-018-0030-8