Abstract
The Prefabricated Cage System (PCS) has the advantages of high bearing capacity and good ductility. Meanwhile, it is convenient for factory production and it is beneficial to the cost savings, construction period shortening. Side joint is the weak region of PCS concrete frame and has great influence on seismic behavior of the whole structure. Thus systematically study on the seismic behavior of PCS concrete side joint is necessary. This paper presents a finite element study on behavior of the side joint under seismic loading. In the finite element model, PCS concrete and the reinforced concrete (RC) is modeled by the solid element and fiber-beam element, respectively. The numerical results is compared with the experimental results and it is found that the results of model based on fiber-beam element is in better agreement with the experimental results than solid element model. In addition, the overall seismic behavior of the side joints in PCS concrete is better than that of the RC with the same strength.
Similar content being viewed by others
References
Li Y, Li M, Su H. Experimental analysis of seismic behavior of interior joints with high-strength reinforcement and high-toughness concrete. Journal of Civil Architectural & Environmental Engineering, 2017, 39(1): 86–92
Sezen H, Shamsai M. Behavior of normal strength concrete columns reinforced with prefabricated cage system. American Society of Civil Engineers, 2006, 44(201): 89–100
Fisher M J. Experimental evaluation of reinforcement methods for concrete beam-column Joints. Thesis for the Master’s Degree. Ohio: Ohio state University, 2009
Zeng Z, Fei L, Liang Y. Experimenta research on concrete columns reinforced with prefabricated cage system under axial compression. Industrial Construction, 2014, 44(9): 51–55
Liang Y. Experimental Study on Flexural Performance of Prefabricated Cage System Reinforced Concrete Beam. Quanzhou: HuaQiao University, 2014
American Concrete Institute. Building Code Requirements for Structural Concrete and Commentary (ACI 318RM-05). American Concrete Institute, 2005
Rabczuk T, Akkermann J, Eibl J. A numerical model for reinforced concrete structures. International Journal of Solids and Structures, 2005, 42(5–6): 1327–1354
Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A geometrically nonlinear three-dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 2008, 75(16): 4740–4758
Rabczuk T, Belytschko T. Application of particle methods to static fracture of reinforced concrete structures. International Journal of Fracture, 2006, 137(1–4): 19–49
Scott B D. Stress-strain behavior of concrete by overlapping hoops at low and high strain rates. ACI Journal, 1982, 79(1): 13–27
Song S, Ye L. A Comparison of design methods for flexure strength of RC beams between Chinese and American design codes for RC structures. Building Science, 2007, 23(7): 28–33
Standards Press of China. Code for Design of Concrete Structures (GB 50010-2010). China Architecture & Building Press, 2010
Song M C. Study on Modeling Method of Reinforced Concrete Beam-Column Joint Core. Chongqing: Chongqing University, 2009
Mander J A B, Priestley M J N. Theoretical stress-strain model for confined concrete. Journal of the Structural Division, 1988, 114(8): 1804–1826
Acknowledgements
The authors appreciate the financial support from the National Key Research and Development Program of China (Nos. 2016YFC0701802, 2016YFC0701507) and Anhui Provincial Natural Science Foundation (No. 1908085ME144). In addition, thanks to Prof. Halil Sezen of Ohio State University for responding to the email and related experimental data.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, Y., Zhu, S. Finite element analysis on the seismic behavior of side joint of Prefabricated Cage System in prefabricated concrete frame. Front. Struct. Civ. Eng. 13, 1095–1104 (2019). https://doi.org/10.1007/s11709-019-0538-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-019-0538-2