Advertisement

Application of random set method in a deep excavation: based on a case study in Tehran cemented alluvium

  • Arash Sekhavatian
  • Asskar Janalizadeh Choobbasti
Research Article

Abstract

The design of high-rise buildings often necessitates ground excavation, where buildings are in close proximity to the construction, thus there is a potential for damage to these structures. This paper studies an efficient user-friendly framework for dealing with uncertainties in a deep excavation in layers of cemented coarse grained soil located in Tehran, Iran by non-deterministic Random Set (RS) method. In order to enhance the acceptability of the method among engineers, a pertinent code was written in FISH language of FLAC2D software which enables the designers to run all simulations simultaneously, without cumbersome procedure of changing input variables in every individual analysis. This could drastically decrease the computational effort and cost imposed to the project, which is of great importance especially to the owners. The results are presented in terms of probability of occurrence and most likely values of the horizontal displacement at top of the wall at every stage of construction. Moreover, a methodology for assessing the credibility of the uncertainty model is presented using a quality indicator. It was concluded that performing RS analysis before the beginning of every stage could cause great economical savings, while improving the safety of the project.

Keywords

uncertainty reliability analysis deep excavations random set method finite difference method 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Lacasse S, Nadim F. Uncertainties in characterizing soil properties. In: Shackelford C D, Nelson P P, Roth M J S, eds. Proceedings of Conference on Uncertainty in the Geologic Environment: From Theory to Practice (Uncertainty ‘96). American Society of Civil Engineers, 1996, 49–75Google Scholar
  2. 2.
    Griffiths D V, Fenton G A. Influence of soil strength spatial variability on the stability of an undrained clay slope by finite elements. Geo-Denver Conf. on Soil Stability, Denver, Colorado, United States, 2000, 184–193Google Scholar
  3. 3.
    Fenton G A, Griffiths D V. Bearing capacity of spatially random cφ soils. In: Proceedings of the International Conference on Computer Methods and Advances in Geomechanics, Rotterdam, Balkema, 2001, 1411–1415Google Scholar
  4. 4.
    Ang A H S, Tang W H. Probability Concepts in Engineering Planning and Design: Volume I-Basic Principles. New York: Wiley & Sons, 1975Google Scholar
  5. 5.
    Harr M E. Reliability Based Design in Civil Engineering. New York: Dover publications, 1996Google Scholar
  6. 6.
    Haldar A, Mahadevan S. Probability, Reliability, and Statistical Methods in Engineering Design. New York: Wiley & Sons, 2000Google Scholar
  7. 7.
    Vu-Bac N, Lahmer T, Keitel H, Zhao J, Zhuang X, Rabczuk T. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials, 2014a, 68: 70–84CrossRefGoogle Scholar
  8. 8.
    Vu-Bac N, Lahmer T, Zhang Y, Zhuang X, Rabczuk T. Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs). Composites. Part B, Engineering, 2014b, 59: 80–95Google Scholar
  9. 9.
    Vu-Bac N, Silani M, Lahmer T, Zhuang X, Rabczuk T. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science, 2015, 96: 520–535CrossRefGoogle Scholar
  10. 10.
    Rackwitz R. Reviewing probabilistic soils modeling. Computers and Geotechnics, 2000, 26(3–4): 199–223CrossRefGoogle Scholar
  11. 11.
    Phoon K, Kulhawy F H. Characterization of geotechnical variability. Canadian Geotechnical Journal, 1999, 36(4): 612–624CrossRefGoogle Scholar
  12. 12.
    Duncan J M. Factors of safety and reliability in geotechnical engineering. Journal of Geotechnical and Geoenvironmental Engineering, 2000, 126(4): 307–316CrossRefGoogle Scholar
  13. 13.
    Lee I K, White W, Ingles O G. Geotechnical Engineering. Boston: Pitman, 1983Google Scholar
  14. 14.
    Kulhway F H. On the evaluation of static soil properties. In: Proceedings of a Specialty ASCE Conference on Stability and Performance of Slopes and Embankments-II, Volume 1. Berkley, California, 1992, 95–115Google Scholar
  15. 15.
    Peschl G M, Schweiger H F. Reliability analysis in geotechnics with finite elements–comparison of probabilistic, stochastic and fuzzy set methods. In: Proceedings of the 3rd International Symposium on Imprecise Probabilities and Their Applications (ISIPTA_03). Canada: Carleton Scientific, 2003, 437–451Google Scholar
  16. 16.
    Ben-Haim Y, Elishakoff I. Convex Models of Uncertainty in Applied Mechanics. Amsterdam: Elsevier, 1990MATHGoogle Scholar
  17. 17.
    Oberguggenberger M, Fellin W. From probability to fuzzy sets: the struggle for meaning in geotechnical risk assessment. In: Proceedings of the International Conference on Probabilistics in Geotech-nics–Technical and Economical Risk Estimation, Essen: VGE, 2002, 29–38Google Scholar
  18. 18.
    Peschl G M. Reliability Analyses in Geotechnics with the Random Set Finite Element Method. Dissertation for PhD degree. Graz University of Technology, 2004Google Scholar
  19. 19.
    Dubois D, Prade H. Consonant approximation of belief functions. International Journal of Approximate Reasoning, 1990, 4(5–6): 419–449MathSciNetCrossRefMATHGoogle Scholar
  20. 20.
    Dubois D, Prade H. Random sets and fuzzy interval analysis. Fuzzy Sets and Systems, 1991, 42(1): 87–101MathSciNetCrossRefMATHGoogle Scholar
  21. 21.
    Walley P. Statistical Reasoning with Imprecise Probabilities. London: Chapman and Hall, 1991CrossRefMATHGoogle Scholar
  22. 22.
    Dempster A P. Upper and lower probabilities induced by a multivalued mapping. Annals of Mathematical Statistics, 1967, 38(2): 325–339MathSciNetCrossRefMATHGoogle Scholar
  23. 23.
    Shafer G. A Mathematical Theory of Evidence. Princeton: Princeton University Press, 1976MATHGoogle Scholar
  24. 24.
    Tonon F, Bernardini A, Mammino A. Determination of parameters range in rock engineering by means of Random Ret Theory. Reliability Engineering & System Safety, 2000, 70(3): 241–261CrossRefGoogle Scholar
  25. 25.
    Dong W, Shah H C. Vertex method for computing functions of fuzzy variables. Fuzzy Sets and Systems, 1987, 24(1): 65–78MathSciNetCrossRefMATHGoogle Scholar
  26. 26.
    Cornell C A. First-order uncertainty analysis of soils deformation and stability. In: Proceedings of the International Conference on Applications of Statistics and Probability (ICASP1), 1971, 129–144Google Scholar
  27. 27.
    Alonso E E, Krizek R J. Stochastic formulation of soil profiles. In: Proceedings of the International Conference on Applications of Statistics and Probability (ICASP2). Aachen, Germany, 1975, 9–32Google Scholar
  28. 28.
    Lumb P. Spatial variability of soil properties. In: Proceedings of the 2nd International Conference on the Application of Statistics and Probability to Soil and Structural Engineering (ICASP). Aachen, Germany, 1975, 397–421Google Scholar
  29. 29.
    Vanmarcke E H. Probabilistic modeling of soil profiles. Journal of the Geotechnical Engineering Division, ASCE, 1977, 103: 1227–1246Google Scholar
  30. 30.
    Vanmarcke E H. Random Fields–Analysis and Synthesis. Cambridge, MA: MIT-Press, 1983MATHGoogle Scholar
  31. 31.
    Itasca. FLAC2D (Fast Lagrangian Analysis of Continua) version 7.0 user’s manual. Minneapolis, MN, USA: Itasca Consulting Group, 2011Google Scholar
  32. 32.
    Christian J T, Ladd C C, Baecher G B. Reliability applied to slope stability analysis. Journal of Geotechnical Engineering 1994, 120 (12): 2180–2207CrossRefGoogle Scholar
  33. 33.
    Rieben E H. Geological observation on alluvial deposits in northern Iran. Geological Organization of Iran, Report 9, 1966 (in French)Google Scholar
  34. 34.
    Duncan J M, Byrne P M, Wong K S, Marby P. Strength, stress-strain and bulk modulus parameters for finite element analysis of stresses and movements in soil mass. Rep. No. UCB/GT/80-01, University of California, Berkeley, California, 1980Google Scholar
  35. 35.
    Seed R B, Duncan J M. SSCOMP: a finite element analysis program for evaluation of soil structure interaction and compaction effects. Report No. UCB/GT/84-02, University of California, Berkeley, California, 1984Google Scholar
  36. 36.
    Briaud J L, Lim Y. Tieback walls in sand: numerical simulations and design implications. Journal of Geotechnical and Geoenvironmental Engineering, 1999, 125(2): 101–110CrossRefGoogle Scholar
  37. 37.
    Lim Y, Briaud J L. Three dimensional nonlinear finite element analysis of tieback walls and of soil nailed walls under piled bridge abutment. Report to the Federal Highway Administration and the Texas Department of Transportation, Department of Civil Engineering, Texas A&M University, College Station, Texas, 1996Google Scholar
  38. 38.
    Dunlop P, Duncan J M. Development of failure around excavated slopes. Journal of the Soil Mechanics and Foundations Division, ASCE, 1970, 96: 471–493Google Scholar
  39. 39.
    Finno R J, Blackburn J T, Roboski J F. Three dimensional effects for supported excavations in clay. Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133(1): 30–36CrossRefGoogle Scholar
  40. 40.
    U.S. EPA. TRIM FaTE Technical Support Document Volume I: Description of Module. EPA/43/D-99/002A, Office of Air Quality Planning and Standards, 1999Google Scholar
  41. 41.
    Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites. Part B, Engineering, 2015, 68: 446–464CrossRefGoogle Scholar
  42. 42.
    Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100: 19–31CrossRefGoogle Scholar
  43. 43.
    Baecher G B. Geotechnical Error Analysis. Special Summer Course 1.60s. Cambridge: Massachusetts Institute of Technology, 1985Google Scholar
  44. 44.
    Kulhawy F H, Birgisson B, Grigoriu M D. Reliability based foundation design for transmission line structures: transformation models for in situ tests. Electric Power Research Institute, Palo Alto, California: Report EL-5507(4), 1992Google Scholar
  45. 45.
    Li K S, White W. Reliability index of slopes. In: Proceedings of 5th International Conference on Application of Statistics and Probability in Soil and Structural Engineering, 1987, (2): 755–762Google Scholar
  46. 46.
    Federal Highway Administration (FHWA). Soil nail walls reference manual. U.S. Department of Transportation Federal Highway Administration, 2015Google Scholar
  47. 47.
    US Army Corps of Engineers (USACE). Introduction to probability and reliability methods for use in geotechnical engineering. Engineering Technical Letter No. 1110–2-547, 1997Google Scholar
  48. 48.
    Long M. Database for retaining wall and ground movements due to deep excavations. Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127(3): 203–224CrossRefGoogle Scholar

Copyright information

© Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Arash Sekhavatian
    • 1
  • Asskar Janalizadeh Choobbasti
    • 1
  1. 1.Department of Civil EngineeringBabol Noshirvani University of TechnologyBabolIran

Personalised recommendations