Skip to main content
Log in

Coating of anatase titania on clinoptilolite by metal organic chemical vapor deposition method: enhanced mesoporosity and photocatalytic activity

  • Original Paper
  • Published:
Chemical Papers Aims and scope Submit manuscript

Abstract

Clinoptilolite-supported TiO2 (TiO2/CPMOCVD) has been synthesized by metal organic chemical vapor deposition method (MOCVD). Titanium precursor was evaporated at 110 °C under nitrogen flow rate to promote the surface interaction between titanium species and clinoptilolite. The effect of titanium precursor on the crystalline structure and the surface area of clinoptilolite were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), transformed infrared spectroscopy (FT-IR), Raman spectroscopy, and Brunauer–Emmett–Teller measurement. XRD and SEM results indicate that TiO2 precursor interacted with the support, decreasing the crystallinity of the clinoptilolite. The analysis by FT-IR spectroscopy further confirms that the titanium species were bound to clinoptilolite through Ti–O–Si bonds. The TiO2/CPMOCVD catalyst showed a mesoporous structure with the distribution of pores in several dimensions 3.7–7.1 nm, with high specific surface area (~ 471 m2/g). MOCVD improved the adsorption capacity of the catalyst surface towards the pollutants. TiO2/CPMOCVD particles turn yellow after adsorption of salicylic acid. The development of the yellow color is a clear indication of the formation of charge transfer titanium (IV) salicylate surface complex. Photocatalytic decomposition of SA in aqueous solution was carried out using TiO2/CPMOCVD. Experimental results revealed that TiO2/CPMOCVD required shorter irradiation time (120 min) for complete decomposition of SA than commercial P25 Degussa and TiO2/CPimp (clinoptilolite-supported TiO2 using impregnation method). The TiO2/CPMOCVD can be recycled at least four times without loss in activity, indicating their magnificent stability.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Kais Elghniji.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Elghniji, K., Elaloui, E. & Moussaoui, Y. Coating of anatase titania on clinoptilolite by metal organic chemical vapor deposition method: enhanced mesoporosity and photocatalytic activity. Chem. Pap. 72, 1159–1168 (2018). https://doi.org/10.1007/s11696-017-0350-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11696-017-0350-1

Keywords

Navigation