Abstract
Structural and system reliability of a typical jet vane (JV) thrust vector control (TVC) subsystem subjected to stochastic loadings is investigated. Jet vane TVC (JVTVC) is used in many aerospace liquid and solid propulsion systems. For the purpose of this work, JVTVC structural reliability of a solid rocket propulsion system is computed using an explicit closed-form limit state function. The JV structure is influenced by the internal ballistic loads emanating out of the solid rocket propulsion internal ballistic, whose performance is modeled via a one-dimensional uniform flow assumption at the engine steady operating condition. Subsequently, JV structural reliability is predicted using the methods of mean value first-order second-moment as well as the first- and second-order reliability methods. The reliability results of the analytical methods are compared with Monte Carlo simulation for verification purposes. Finally, a comprehensive sensitivity analysis is performed to identify the key JVTVC and solid rocket propulsion design parameters affecting the TVC total system reliability. The parameters considered for sensitivity analysis include the JV geometric and structural properties as well as the solid rocket propulsion ballistic and geometric features. It turned out that the vane support arm radius and the vane area are the most important strength and load design variables, respectively, that impact the JVTVC failure reliability.
Similar content being viewed by others
References
G.P. Sutton, Rocket propulsion elements, 6th edn. (Wiley, New York, 1992)
Q.C. Québec, R. Farinaccio, R.A. Stowe. Force measurements evaluating erosion effects on jet vanes for a thrust vector control system, in 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 20–23 July 2003, Huntsville, Alabama
Hong-Gye Sung, Yong-Seok Hwang, Thrust-vector characteristics of jet vanes arranged in x-formation within a shroud. J. Propul. Power 20(3), 501–508 (2004)
I.S. Raju, D.S. Lee, M. Mohaghegh. Negative stress margins are they real?, in 52nd AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2011-1808 (2011)
C.E. Larsen, I.S. Raju. Moving aerospace structural design practice to a load and resistance factor approach, in 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2016-0230 (2016)
E. Divo, A. Kassab, R. Cavalleri, Application of the DRBEM to model ablation characteristics of a thrust vector control vane. Eng. Anal. Boundary Elem. 23(8), 693–701 (1999)
A.O. Danielson. Inverse heat transfer studies and the effects of propellant aluminum on TVC jet vane heating and erosion, in AIAA, SAE, ASME, and ASEE, Joint Propulsion Conference, 26th, Orlando, FL (1990)
C.P. Rahaim, et al. Jet vane thrust vector control: a design effort, in AIAA paper (1996): 96-2904
N. Raouf, S.H. Pourtakdoust, Structural reliability analysis of a solid rocket motor with ellipsoidal cap. J. Spacecr. Rockets 53(2), 389–392 (2016)
N. Raouf, S.H. Pourtakdoust. Time varying structural reliability of launch vehicle via extreme response approach. J. Spacecr. Rockets 1–9 (2016)
J.D. Anderson, Modern compressible flow: with historical perspective (McGraw Hill, Boston, 2003)
N. Raouf, S.H. Pourtakdoust, launch vehicle multi-objective reliability-redundancy optimization using a hybrid genetic algorithm-particle swarm optimization. Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng. 229(10), 1785–1797 (2015)
Joseph E. Shigley, Charles R. Mischke, Richard G. Budynas, Mechanical engineering design (McGraw-Hill, New York, 2004)
Peter Bjerager, Probability integration by directional simulation. J. Eng. Mech. 114(8), 1285–1302 (1988)
Abraham M. Hasofer, Niels C. Lind, Exact and invariant second-moment code format. J. Eng. Mech. Div. 100(1), 111–121 (1974)
C.A. Cornell, A probability-based structural code. Am. Concr. Inst. J. Proc. 66(12), 974–985 (1969)
Rüdiger Rackwitz, Bernd Flessler, Structural reliability under combined random load sequences. Comput. Struct. 9(5), 489–494 (1978)
Y. Zhang, A. Der Kiureghian. Two improved algorithms for reliability analysis. In: R. Rackwitz, G. Augusti, A. Borr (eds.) Proceedings of the Sixth IFIP WG7.5 Reliability and optimization of structural systems (1995)
K. Breitung, Asymptotic approximations for multinormal integrals. J. Eng. Mech. 110(3), 357–366 (1984)
Der Kiureghian, Hong-Zong Lin Armen, Shyh-Jiann Hwang, Second-order reliability approximations. J. Eng. Mech. 113(8), 1208–1225 (1987)
S. Engelund, R. Rackwitz, A benchmark study on importance sampling techniques in structural reliability. Struct. Saf. 12(4), 255–276 (1993)
Behrooz Keshtegar, Mahmoud Miri, Reliability analysis of corroded pipes using conjugate HL–RF algorithm based on average shear stress yield criterion. Eng. Fail. Anal. 46, 104–117 (2014)
Hocine Dehmous, Hélène Welemane, Multi-scale reliability analysis of composite structures—application to the Laroin footbridge. Eng. Fail. Anal. 18(3), 988–998 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Raouf, N., Pourtakdoust, S.H. & Samiei Paghaleh, S. Reliability and Failure Analysis of Jet Vane TVC System. J Fail. Anal. and Preven. 18, 1635–1642 (2018). https://doi.org/10.1007/s11668-018-0563-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-018-0563-9