Advertisement

Journal of Failure Analysis and Prevention

, Volume 18, Issue 1, pp 130–135 | Cite as

Designing an External Collar Torsional Damper Based on the Backlash Excitation Measurements and the Calculated Torsional Elastic Properties of the Engine Cold Test Driveline

  • Rauf Tailony
  • Efstratios Nikolaidis
Technical Article---Peer-Reviewed
  • 48 Downloads

Abstract

The elastic properties of the cold test driveline are essential in predicting the torsional dynamic behavior of the system. The occurrence of torsional vibrations compels designers to apply several approaches to shift the critical speeds away from the machine operating range. This study reviews existing conventional methods for reducing the torsions deformation caused by the compliance backlash. A systematic approach is proposed for the backlash calculation through the torque signatures differentiation and for designing an external collar dampener for the suppression of backlash periodic impact.

Keywords

Driveline Cold test Torsional vibration Backlash Torque analysis Torsional defects Torsional damping 

References

  1. 1.
    M. Corbo, S. Malanoski, Practical Design Against Torsional Vibration, 21st Annual Meeting of the Vibration Institute (1997)Google Scholar
  2. 2.
    E. Mohammed, Torsional Vibration Analysis of Automotive Drivelines (The University of Leeds, Leeds, 1997)Google Scholar
  3. 3.
    E. Swanson, C.D. Powell, S. Weisman, A practical review of rotating machinery critical speeds and modes. Sound Vib. J. 39, 10–17 (2005)Google Scholar
  4. 4.
    R.L. Eshleman, Torsional vibration of machine systems, in Proceedings of the Sixth Turbomachinery Symposium, pp. 13–22Google Scholar
  5. 5.
    K. Gul, D. Adams, Modeling and torsional vibration analysis of engine cold-test stand drivelines, in Proceedings of the ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (2007), pp. 1–10Google Scholar
  6. 6.
    P. Martin, S. Rothberg, Differential measurements using two laser rotational vibrometers: dynamic backlash, in Proceedings of SPIE—The International Society for Optical Engineering (2006), p. 6345Google Scholar
  7. 7.
    T. Tjahjowidodo, H. Brussel, Identification of backlash in mechanical systems, in Proceedings of the 2004 ISMA International Conference on Noise and Vibration Engineering (2004), pp. 2195–2210Google Scholar
  8. 8.
    S.S. Rao, Mechanical Vibrations (Prentice Hall, Englewood Cliffs, 2011), pp. 666–669Google Scholar
  9. 9.
    G. Scouters, Cold engine testing, U.S. Patent 5,355,713, 1994Google Scholar

Copyright information

© ASM International 2018

Authors and Affiliations

  1. 1.Mechanical, Industrial and Manufacturing EngineeringUniversity of ToledoToledoUSA

Personalised recommendations