Advertisement

Journal of Failure Analysis and Prevention

, Volume 18, Issue 2, pp 265–273 | Cite as

Buckling Analysis of Non-cementing Casing String in Borehole

  • Dongsheng He
  • Gehong Liu
  • Lingling Lu
  • Kang Zhao
  • Dong Guo
  • Yang Zhang
Technical Article---Peer-Reviewed
  • 83 Downloads

Abstract

This article is from the cooperation projects of Tarim Oilfield—the sidetracking feasibility analysis of lateral drilling. It analyzed the buckling behavior of non-cementing casing string in the borehole by means of theoretical analysis and modeling analysis. When free section of casing string occurs buckling, casing string bends along the sidewall, leads to additional force and additional bending moment. If casing string’s deformation is too large, it reduces the ability to resist broken of casing string. The study of non-cementing casing string buckling is important to the feasibility of lateral drilling. The free section of casing string is the research objective of this paper. Considering the factors such as self weight of casing string, fluid pressure inside and outside casing, downhole temperature and contact frictional force between casing and shaft lining, the differential equation of buckling is derived by the energy method. The solution of the buckling differential equation has been solved, and the analytical solution of the sinusoidal and spiral buckling of the casing string along the tube column has been obtained. This article analyzed the buckling behavior of non-cementing casing string in the borehole by means of theoretical analysis and finite element analysis. The results show that the difference of the analytical solution and simulation results of the buckling differential equation is <15%.

Keywords

Sinusoidal buckling Helical buckling Buckling differential equation Finite element analysis 

References

  1. 1.
    Lubinski, A. A study of the buckling of rotary strings. API Drill. Prod. Pract. 178–214 (1950)Google Scholar
  2. 2.
    A. Lubinski, K.A. Blenkarn, Buckling of tubing in pumping wells, its effects and means for controling It. Trans. AIME 210, 73–88 (1957)Google Scholar
  3. 3.
    A. Lubinski, W.S. Althouse, J.L. Logan, Helical buckling of tubing sealed in packers. J. Pet. Technol. 14(3), 655–670 (1962)CrossRefGoogle Scholar
  4. 4.
    R. Dawson, P.R. Paslay, Drillpipe buckling in inclined holes. J. Pet. Technol 36(5), 1119–1125 (1984)Google Scholar
  5. 5.
    R.C. Mccann, P.V.R. Suryanarayana, Experimental study of curvature and frictional effects on buckling. OTC7568, pp. 511–521, l994Google Scholar
  6. 6.
    R.F. Mitchell, Forces on curved tubular caused by fluid flow. SPE Prod. Facil. 11(2), 30–34 (1996)CrossRefGoogle Scholar
  7. 7.
    W. Gong, Bending problem of pipe string under hydraulic pressure. Oil Drill. Prod. Technol. 3, 11–22 (1988)Google Scholar
  8. 8.
    Z. Li, Geometrically nonlinear bending of a slender circular rod (tube) in a horizontal tube. Mech. Eng. 16(3), 16–18 (1994)Google Scholar
  9. 9.
    L. Zifeng, Basic equation of rod string dynamics in oil and gas wells. Mech. Eng. 17(1), 40–43 (1995)Google Scholar
  10. 10.
    G. Gao, Sine buckling of pipes in horizontal boreholes. J. Xi’an Pet. Inst. 9(2), 37–41 (1994)Google Scholar
  11. 11.
    G. Guohua, L. Tiantai et al., Analysis of frictional effect on the drill stem stability in horizontal wells. J. Xi’an Pet. Inst. 10(3), 31–35 (1995)Google Scholar
  12. 12.
    G. Guohua, L. Qi, Z. Jianren, Buckling analysis of pipe string in a vertical borehole. J. Xi’an Pet. Inst. 21(1), 46–57 (1996)Google Scholar
  13. 13.
    Z. Yonghong, L. En, H. Fujun et al., Study on the contact pressure of pipe string in spiral buckling. Acta Pet. Sinica 9(7), 24–31 (1998)Google Scholar
  14. 14.
    W. Danong, Z. Zhihong, Application of exact buckling solution of vertical well. Well Test. 14(2), 37–41 (2005)Google Scholar
  15. 15.
    L. Zifeng, Influence of internal and external pressure on equivalent axis force and stability of pipe string in oil wells. J. China Univ. Pet. 2(1), 31–35 (2011)Google Scholar
  16. 16.
    Z. Zengxin, G. Deli, Thermal buckling of high temperature inclined straight thermal recovery well tubular column. Drill. Prod. Technol. 11(6), 98–101 (2008)Google Scholar
  17. 17.
    L. Chen, J.B. Cheatham, Tubing and casing buckling in horizontal wells. J. Pet. Technol. 42, 140–141 (1990)CrossRefGoogle Scholar

Copyright information

© ASM International 2017

Authors and Affiliations

  • Dongsheng He
    • 1
  • Gehong Liu
    • 1
  • Lingling Lu
    • 2
  • Kang Zhao
    • 1
  • Dong Guo
    • 1
  • Yang Zhang
    • 1
  1. 1.Southwest Petroleum UniversityChengduChina
  2. 2.Guangxi Construction Engineering Group Construction Machinery Manufacturing Co., Ltd.NanningChina

Personalised recommendations