Advertisement

Journal of Failure Analysis and Prevention

, Volume 17, Issue 3, pp 571–580 | Cite as

Influence Analysis of Nonlinear Stress–Strain Behavior in Pulverizing Wheel of Fan Mill

  • Chao Liu
  • Dongxiang Jiang
Technical Article---Peer-Reviewed
  • 78 Downloads

Abstract

Recent failures of pulverizing wheels in fan mills of a steam turbine power plant show that the dovetail-groove area of the main components (the front disk and the back disk) is vulnerable. With the purpose of improving strength and optimizing design, this work analyzes different material sets used in components and compares various supporting strategies of the critical section to decrease maximum stress in the zone of vulnerability (ZoV). Finite element method is applied in modeling the pulverizing wheel, and nonlinear material property is formed based on bilinear kinematic hardening rule. Typical loading conditions in operation are applied to compare the nonlinear stress and strain distributions and the maximum. The results show that using an alternative material introduces a series of variations of the stress and strain in the assembly. Also, optimizing the supporting strategy can significantly decrease the maximum stress and strain, and the variation of the ZoV should also be considered to compare the enhancement of strength of the whole structure.

Keywords

Failure cause analysis Pulverizing wheel Fan mill Design optimization 

References

  1. 1.
    J. An, Q. Guo, Handbook of Metal Material (Chemical Industry Press, Beijing, 2013)Google Scholar
  2. 2.
    ANSYS Inc., ANSYS Release 13.0 documentation, Pittsburgh, PA (2011)Google Scholar
  3. 3.
    T.N. Chakherlou, M.J. Razavi, B. Abazadeh, Finite element investigations of bolt clamping force and friction coefficient effect on the fatigue behavior of aluminum alloy 2024-T3 in double shear lap joint. Eng. Fail. Anal. 29, 62–74 (2013)CrossRefGoogle Scholar
  4. 4.
    P. Chan, J. Thornley, Common features of fretting-fatigue cracking in steels. Pract. Fail. Anal. 2(6), 85–90 (2002)CrossRefGoogle Scholar
  5. 5.
    F. De Angelis, A comparative analysis of linear and nonlinear kinematic hardening rules in computational elastoplasticity. Tech. Mech. 32(2–5), 164–173 (2012)Google Scholar
  6. 6.
    X. Jiang, Y. Zhu, J. Hong, X. Chen, Y. Zhang, Investigation into the loosening mechanism of bolt in curvic coupling subjected to transverse loading. Eng. Fail. Anal. 32, 360–373 (2013)CrossRefGoogle Scholar
  7. 7.
    P. Lepikhin, Theoretical construction of initial and subsequent yield surfaces for isotropic strain-hardening elastoplastic materials of the differential type. Strength Mater. 42(5), 606–612 (2010)CrossRefGoogle Scholar
  8. 8.
    C. Liu, D. Jiang, J. Chen, J. Chen, Torsional vibration and fatigue evaluation in repairing the worn shafting of the steam turbine. Eng. Fail. Anal. 26, 1–11 (2012)CrossRefGoogle Scholar
  9. 9.
    C. Liu, D. Jiang, F. Chu, J. Chen, Crack cause analysis of pulverizing wheel in fan mill of 600 mw steam turbine unit. Eng. Fail. Anal. 42, 60–73 (2014)CrossRefGoogle Scholar
  10. 10.
    R. Pandey, Failure analysis of coal pulveriser gear box. Eng. Fail. Anal. 14(4), 541–547 (2007)CrossRefGoogle Scholar
  11. 11.
    N. Parida, S. Tarafder, S.K. Das, P. Kumar, G. Das, V. Ranganath, D. Bhattacharya, Failure analysis of coal pulverizer mill shaft. Eng. Fail. Anal. 10(6), 733–744 (2003)CrossRefGoogle Scholar
  12. 12.
    A. Pavan, K. Vikrant, M. Swamy, G. Jayaraman, Root cause analysis of bowl-mill pinion shaft failures. Case Stud. Eng. Fail. Anal. 1(2), 103–109 (2013)CrossRefGoogle Scholar
  13. 13.
    B. Ravi Kumar, D. Bhattacharya, S.K. Das, S.Ghosh Chowdhury, Premature fatigue failure of a spring due to quench cracks. Eng. Fail. Anal. 7(6), 377–384 (2000)CrossRefGoogle Scholar
  14. 14.
    A. Savaidis, G. Savaidis, C. Zhang, Elastic–plastic fe analysis of a notched cylinder under multiaxial nonproportional fatigue loading with variable amplitudes. Comput. Struct. 80(25), 1907–1918 (2002)CrossRefGoogle Scholar
  15. 15.
    Y. Shi, M. Wang, Y. Wang, Experimental and constitutive model study of structural steel under cyclic loading. J. Constr. Steel Res. 67(8), 1185–1197 (2011)CrossRefGoogle Scholar
  16. 16.
    B. Wen, Handbook of Metal Material (Publishing House of Electronics Industry, Beijing, 2013)Google Scholar
  17. 17.
    Z. Yao, G. Wang, L. Song, Y. Ma, X. Li, Failure investigation of the pulverizing fan of ventilation mill. Eng. Fail. Anal. 49, 11–19 (2015)CrossRefGoogle Scholar
  18. 18.
    R.G. Zalosh, Review of coal pulverizer fire and explosion incidents, in Industrial Dust Explosions: Symposium on Industrial Dust Explosions: Pittsburgh, Pennsylvania, 10–12 June 1986, vol. 958, ASTM International, 1987, p. 191Google Scholar

Copyright information

© ASM International 2017

Authors and Affiliations

  1. 1.State Key Laboratory of Control and Simulation of Power System and Generation Equipments, Department of Thermal EngineeringTsinghua UniversityBeijingPeople’s Republic of China
  2. 2.Department of Mechanical EngineeringIowa State UniversityAmesUSA

Personalised recommendations