Advertisement

Journal of Failure Analysis and Prevention

, Volume 16, Issue 2, pp 189–196 | Cite as

Characterization of Corrosion Products in RTPF and All-Aluminum Microchannel Heat Exchangers

  • S. Nasrazadani
  • S. Nakka
Case History---Peer-Reviewed

Abstract

Phases and morphology of corrosion products formed on failed round tube and plate fin (RTPF) and all-aluminum microchannel heat exchangers are characterized. RTPF heat exchanger experiences formicary corrosion or ant nest corrosion due to interaction with carboxylic compounds. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FTIR) are used to determine different compounds formed on infinite loop copper RTPF heat exchanger. Complex compounds of zinc carbonate hydroxide, cupric oxide, cuprous oxides were also found on RTPF heat exchanger. SEM/EDS and FTIR analyses have been done on all-aluminum microchannel heat exchanger to document morphological and elemental analyses of corrosion products.

Keywords

Scanning electron microscopy (SEM) Energy-dispersive spectroscopy (EDS) Fourier-transform infrared spectroscopy (FTIR) Round tube plate fin (RTPF) heat exchanger All-aluminum microchannel heat exchanger 

References

  1. 1.
    The benefits of aluminium in HVAC&R heat exchangers: SAPA, http://www.sapagroup.com/pages/26202/Sapa_HVAC_White_Paper.pdf. Accessed 29 Dec 2015
  2. 2.
    H. Peltola, Failure analysis of copper tube in a finned heat exchanger. Eng. Fail. Anal. 51, 83–97 (2015)CrossRefGoogle Scholar
  3. 3.
    Corrosion failure analysis of copper tube of air conditioner parts, http://siamkaewkumsai.blogspot.com/2010/09/corrosion-failure-analysis-of-copper.html. Accessed 29 Dec 2015
  4. 4.
    S. Nasrazadani, Application of IR spectroscopy for study of phosphoric and tannic acids interactions with magnetite, goethite, and lepidocrocite. Corros. Sci. 39(10–11), 1845–1859 (1997)CrossRefGoogle Scholar
  5. 5.
    Y. Li, Synthesis of copper(II) oxide particle and detection of photoelectrochemically generated hydrogen, http://www.nnin.org/sites/default/files/files/2008NNINreuLI.pdf. Accessed 29 Dec 2015
  6. 6.
    M.R. Johan, Annealing effects on the properties of copper oxide thin films prepared by chemical deposition. Int. J. Electrochem. Sci. 6, 6094–6104 (2011)Google Scholar
  7. 7.
    M. Kooti, Fabrication of nanosized cuprous oxide using Fehling’s solution. Trans. F Nanotechnol. 17(1), 73–78 (2010)Google Scholar
  8. 8.
    G. Papadimitropoulos, Deposition and characterization of copper oxide thin films. J. Phys. Conf. Ser. 10, 182–185 (2005)CrossRefGoogle Scholar
  9. 9.
    R.J. Mortimer, Characterization and humidity sensing properties of aluminum(oxy)-hydroxide films prepared by cathodically induced precipitation. Sens. Actuat. B Chem. 128, 124–132 (2007)CrossRefGoogle Scholar
  10. 10.
    T.N. Ramesh, Polytypic transformations of aluminum hydroxide: a mechanistic investigation. Particuology 10, 359–364 (2012)CrossRefGoogle Scholar
  11. 11.
    J. Kasperek, Analysis of the corrosion products on galvanized steels. Mater. Chem. Phys. 56, 205–213 (1998)CrossRefGoogle Scholar

Copyright information

© ASM International 2016

Authors and Affiliations

  1. 1.Department of Engineering TechnologyUniversity of North TexasDentonUSA

Personalised recommendations