Journal of Failure Analysis and Prevention

, Volume 13, Issue 1, pp 80–89 | Cite as

Life Prediction of Thin Organic Films by a Combination of Digital Shearography and Electrochemical Impedance Spectroscopy

Technical Article---Peer-Reviewed
  • 131 Downloads

Abstract

A critical (steady state) value of the conductivity of different organic coatings was determined by a combination of digital shearography and electrochemical impedance spectroscopy (EIS). The behavior of organic coatings, i.e., ACE premium-gray enamel, white enamel, beige enamel (spray coatings), a yellow acrylic lacquer, and a gold nail polish on a metallic alloy, i.e., a carbon steel, was investigated over a temperature range of 20–60 °C. The value of the conductivity of coatings was determined by correlating the in-plan displacement of the coating (by shearography over a temperature range 20–60 °C) and the value of the alternating current impedance of the coating by EIS in 3% NaCl solution. The integrity of the coatings with respect to time was assessed by comparing the measured value of conductivity to the critical (steady state) or asymptotic value of conductivity. In other words, by shearography, measurement of coating properties could be performed independent of parameters such as UV exposure, humidity, presence of chemical species, and other parameters which may normally interfere with conventional methods of the assessing of the integrity of coatings. Therefore, one may measure the conductivity of coatings, regardless of the history of the coating, in order to assess the integrity of coatings. Also, the obtained shearography data were found to be in a reasonable trend with the data of EIS in 3% NaCl solution.

Keywords

Carbon steel Organic coatings Digital shearography EIS 

References

  1. 1.
    Robert, K., Sneppit, E.: Speckle Metrology, Chap. 2. Academic Press, New York (1978)Google Scholar
  2. 2.
    Habib, K.: Thermally induced deformations measured by shearography. Opt. Laser Technol. 37(7), 83–86 (2005)Google Scholar
  3. 3.
    Habib, K.: Measurement of thermal expansion coefficients of thin film of different organic coatings by shearography. Key Eng. Mater. 67, 321–323 (2006)Google Scholar
  4. 4.
    Habib, K.: Measurement of thermal expansion coefficients of thin film of different ceramic coatings by shearography. Key Eng. Mater. 529, 334–335 (2007)Google Scholar
  5. 5.
    Lambourne, R.: Paint and Surface Coatings: Theory and Practice. Wiley, New York (1987)Google Scholar
  6. 6.
    Schweitzer, P.: Mechanical and Corrosion Resistance Properties of Plastics and Elastomers. Marcel Dekker, New York (2000)Google Scholar
  7. 7.
    Zhang, H., Ke, J.: Determination of residual stress by laser speckle shearing interferometry and hole drilling method. J. Exp. Mech. 1, 181–188 (1986)Google Scholar
  8. 8.
    Shigley, J.: Mechanical Engineering Design, 3rd edn, p. 67. McGraw-Hill, New York (1978)Google Scholar
  9. 9.
    Habib, K.: Measurement of volume resistivity/conductivity of metallic alloy in inhibited seawater by optical interferometry techniques. Rev. Sci. Instrum. 82, 034103 (2011)CrossRefGoogle Scholar
  10. 10.
    ASTM: Annual Book of ASTM Standards, Report No. B457-67 (1994), p. 179Google Scholar
  11. 11.
    Bolz, R., George, T.: CRC Handbook of Tables for Applied Engineering and Science, 2nd edn. pp. 118, 144, 154. CRC Press, Cleveland, OH (1973)Google Scholar
  12. 12.

Copyright information

© ASM International 2012

Authors and Affiliations

  1. 1.Materials Science Laboratory, Department of Advanced SystemsKuwait Institute for Scientific Research (KISR)SafatKuwait

Personalised recommendations