Advertisement

Journal of Failure Analysis and Prevention

, Volume 12, Issue 4, pp 382–390 | Cite as

The Influence of Method and Environment in Torquing Screws Used in Bucket Wheel to Stacker-Reclaimer Machine

  • J. A. Martins
  • E. C. Romão
  • I. Ferreira
  • I. Kövesdy
Technical Article---Peer-Reviewed
  • 291 Downloads

Abstract

Mining machines are of heavy-duty and robust type, and at the same time, they are keys to mining performance and operation. It is well known that mining environment is dirty and dusty as a whole, and this scenario contributes detrimentally for machines and equipment maintenance. This article reveals quantitatively the effect of the environment and the method in tightening screws to clamp the wheel buckets of a Stacker Reclaimer Machine at an Iron Ore Mining. For this study, a statistical tool called Minitab was utilized. The data were collected in the field during an intervention in the machine and treated statistically afterward. The elongations of the screws were measured by ultrasound which revealed that, when only torques are used to tighten the screws, referenced on the theoretical torque (N m) value, the aimed elongation (elastic strain) of screws might not be reached, with the worst case being it may be widely spread; the values obtained by ultrasound revealed such differences. After knowing such discrepancy, the screws were tightened properly to insure that the bucket wheel was correctly clamped. This statistical study quantified the spread values of torque versus elongation condition (bell curves). The ultrasound measurement credited the method utilized.

Keywords

Screws Torque Elongation Ultrasound Stacker/Reclaimer 

References

  1. 1.
    Monaghan, J.M.: The influence of lubrication on the design of yield tightened joints. J. Strain Anal. 26(2), 124–129 (1991)CrossRefGoogle Scholar
  2. 2.
    Luo, G.-P., Xu, L.J., Zhang, J.-G.: Combination effect of fretting and corrosion on Bolt-type power connectors. In: Proceedings of the Forty-Sixth IEEE Holm Conference, Chicago, pp 60–66 (2000)Google Scholar
  3. 3.
    Bolt Science: Methods of tightening threads. http://www.boltscience.com/pages/tighten.htm. (2011)
  4. 4.
    Melkonian, S.: Elementos de Máquinas, 9ª Edição, (2009)Google Scholar
  5. 5.
    Shigley: Mechanical Engineering Design, McGraw-Hill Series in Mechanical Engineering, 9ª Edição. McGraw-Hill, New York (2010)Google Scholar
  6. 6.
    Minitab 15, User Manual (2009)Google Scholar
  7. 7.
    Catalogue—Metso Mining Products. http://www.metso.com
  8. 8.
    Catalogue—AVANTI—Torque/Tension Machine. http://www.hytorc.com/products/hydraulic/avanti
  9. 9.
    Catalogue—USM-3 Ultrasonic Stress Meter. http://www.ibt-usa.com/bolt_meter.html

Copyright information

© ASM International 2012

Authors and Affiliations

  • J. A. Martins
    • 1
  • E. C. Romão
    • 2
  • I. Ferreira
    • 3
  • I. Kövesdy
    • 1
  1. 1.Metso MineralsSorocabaBrazil
  2. 2.UNIFEI—ItabiraSão PauloBrazil
  3. 3.UNICAMP, DEMA/FEMCampinasBrazil

Personalised recommendations