Failure Analysis of Seawater Inlet Pipe
- 180 Downloads
A seawater inlet pipe failed in service. The visual examination showed that the backing bar was present inside the pipe and the failure was characterized by leaks at approximately 4–8 o’clock position near that backing bar. The finite element analysis of fluid in the seawater inlet pipe showed that the eddy zone was formed near the backing bar. The leaks and crater-like surfaces were noticed on the inner pipe surface at which the finite element analysis modeled the possibility of the formation of eddy zone.
KeywordsCavitation erosion Failure analysis Corrosion
- 1.Schleich, W.: Typical failures of CuNi 90/10 seawater tubing systems and how to avoid them. In: EUROCORR 2004Google Scholar
- 2.Powell, C.A.: Review of seawater corrosion resistance and antifouling—a state of the art review. In: Corrosion 2000. NACE International, FIGoogle Scholar
- 3.Giazza, E., Pellufo, P.: A new design approach to reduce water cost in MSF evaporators. International Desalination Association BAH03-153Google Scholar
- 4.BSMA 18: Salt Water Piping System in ShipsGoogle Scholar