Abstract
Over the last four to five decades, applications of fiber-reinforced plastics (FRP) have seen tremendous growth. In spite of the complexity of their behavior, development of composite pressure chambers has significantly contributed to the continuing increase in the strength-to-weight ratio of a significant amount of hardware and testing techniques to evaluate that hardware are continually being developed. This article presents an overview of the developments toward burst pressure prediction of FRP pressure chambers using acoustic emission (AE) technique. Burst strength prediction methods and related research in this context are also briefly discussed. The historical background of FRP pressure chamber/vessel testing using AE is also covered in this review.
Similar content being viewed by others
References
Hamstad, M.A.: A review: acoustic emission, a tool for composite material studies. Exp. Mech. 3, 7–13 (1986)
Ondar, A.: First failure pressure of composite pressure vessels. M.S. thesis (2007)
Mazal, P.: Current possibilities of AE method application in selected areas of industrial practice. In: The 10th International Conference of the Slovenian Society for Non-Destructive Testing application of Contemporary Non-Destructive Testing in Engineering, Ljubljana, Slovenia, pp. 285–295, 1–3 September 2009
Schliessmann, J.A.: Pressure vessel proof test variables and flaw growth. J. Mater. JMLSA 7(4), 465–469 (1972)
Guang, D., Xu, Y.T., Wang, Y.L., Zhang, B.Q., Han, W.X.: AE monitoring and data analysis for large spherical tanks. NDT &E Int. 26(6), 287–290 (1993)
Gomera, V.P., Sokolov, V.L., Fedorov, V.P.: Implementation of AE method to the convent. NDT structure in oil refinery. J. AE 26, 279–289 (2008)
Hamstad, M.A.: Acoustic emission from filament wound pressure bottles. In: Nonmetallic Materials, vol. 4, p. 321. Society of Aerospace Material and Process Engineers, Azusa, CA (1972)
Hamstad, M.A., Chiao, T.T.: Acoustic emission produced during burst tests of filament wound bottles. J. Compos. Mater. 7(3), 320–332 (1973)
Spanner, J.C.: Acoustic Emission—Application and Trends. Tech. Report Handford Eng. Development Laboratory, Richland, WA (1976)
Rao, A.K.: Acoustic emission concepts and applications. In: All India Symposium on Acoustic in Solids. Osmania University, Hyderabad (1979)
Fuwa, M., Bunsell, A.R., Harris, B.: Acoustic emission studies of filament-wound carbon fibre reinforced rings and pressure vessels. J. Strain Anal. 11(2), 97–101 (1976)
Fowler, T.J.: Acoustic emission testing of fiber reinforced plastics. In: ASCE Fall Convention and Exhibit, Preprint 3092, pp. 1–15, 17–21 October 1977
Hamstad, M.A., Patterson, R.G.: Considerations for acoustic emission monitoring of spherical Kevlar/epoxy composite pressure vessels. In: Kulkarni, S.V., Zweben, C.H. (eds.) Composites in Pressure Vessels and Piping, pp. 141–163. American Society of Mechanical Engineers, New York (1977)
Fowler, T.J., Gray, E.: Development of an acoustic emission test for FRP equipment. In: ASCE Convention and Exposition, Preprint No. 3583, Boston, MA, April 1979
Stone, D.E.W.: Non destructive inspection of composite materials for aircraft structural applications. Br. J. NDT 20(2), 65–75 (1978)
Lemonine, L.: Effects of geometric and material non-linear ties on the deflections of filament wound motor chambers. In: AIAA/SAE 14th Joint Propulsion Conference, Las Vegas, 78-1565, pp. 1–8, 25–27 Nov/July 1978
James, M.R.: Fundamentals of acoustic emission and application of an NDT tool for FRP. In: 34th Annual Technical Conference. Reinforced Plastics/Composite Institute, The Society of the Plastics Industry, Inc., section 3-F, pp. 1–3 (1979)
Hamstad, M.A.: Local Characterization of Fiber Composites by Acoustic Emission. Lawrence Livermore Natl. Lab., Livermore, CA, UCRL-85793 (NTIS), available in microfiche only, 23 March 1981
Mumford, N.A., Hopkins, P.C., Lloyd, B.A.: Matrix/fiber interface effects on Kevlar pressure vessel performance. Paper presented at the AIAA/SAE/ASME 18th joint propulsion conference, Cleveland, OH, June 1982
Gorman, M.R.: Acoustic emission from cut damaged six-inch diameter Kevlar/epoxy and graphite/epoxy pressure bottles. Paper presented at the JANNAF meeting, JHU-APL, Laurel, MD, November 1983
Russell, J.C., Gorman, M.R.: Acoustic emission prediction of burst pressures in twenty-inch diameter filament wound graphite/epoxy bottles. In: Proceedings of the First International Symposium on Acoustic Emission from Reinforced Composites, San Francisco, CA, SPI, New York, NY, pp. 1–4, 19–21 July 1983
Gorman, M.R., Retting, T.H.: Long duration AE events in filament wound graphite/epoxy in the 100-300 KHz bank pass region. In: International Symposium on Acoustic Emission from Reinforces composites, San Francisco, CA, July 1983
Hill, E.v.K., Lewis, T.J.: Acoustic emission monitoring of a filament wound composite rocket motor case during hydro proof. J. Mater. Eval. 43, 859–863 (1985)
Chaudhuri, R.A., Balaram, K., Kunukkasseri, V.X.: Arbitrarily laminated anisotropic cylindrical shell under internal pressure. AIAA J. 24(11), 1851–1858 (1986)
Annual Book of ASTM Standard, 1987, vol. 03.03, Nondestructive Testing
Kalloo, F.R.: Predicting burst pressure in filament wound composite vessels using acoustic emission data. MS. thesis, Embry-Riddle Aeronautical University (1988)
Lefloch, C., Beziers, S.: Acoustic Emission Conditions for Failure Prediction of Winding Carbon Structures. Aerospatiale, France, N90-24374/2/GAR, p. 7, July 1989
Gorman, M.R.: Burst prediction by acoustic emission in filament wound pressure vessels. J. Acoust. Emiss. 9(2), 131–139 (1990)
Hill, E.v.K.: Burst Pressure Prediction in 45.7 cm (18 inch) Diameter Graphite/Epoxy Pressure Vessels Using Acoustic Emission Data. San Diego, CA, pp. 272–283 (1991)
Hill, E.v.K.: Predicting burst pressure in filament wound composite pressure vessels by acoustic emission data. Mater. Eval. 50(12), 1439–1445 (1992)
Hill, E.v.K., Walker, J.L., Rowell, R.H.: Burst pressure prediction in graphite/epoxy vessels using neural networks and acoustic emission amplitude data. Mater. Eval. 54(6), 744–748 (1996)
Walker, J.L., Russell, S.S., Workman, G., Hill, E.v.K.: Neural network burst pressure prediction in impact damaged Kevlar/epoxy bottles from acoustic emission amplitude data. In: International Conference on Nonlinear Problems in Aviation and Aerospace, USA, pp. 673–678, 9–11 May 1996
Walker, J.L., Russell, S.S., Workman, G., Hill, E.v.K.: Neural network/acoustic emission burst pressure prediction for impact damaged composite pressure vessels. Mater. Eval. 55(8), 903–907 (1997)
Fisher, M.E., Hill, E.v.K.: Neural network burst pressure prediction in fiber glass epoxy pressure vessels using acoustic emission. In: International Conference on Nonlinear Problems in Aviation and Aerospace, USA, pp. 203–208, 9–11 May 1996
Fisher, M.E., Hill, E.v.K.: Burst pressure prediction of filament wound composite pressure vessels using acoustic emission. Mater. Eval. 56(12), 1395–1401 (1998)
Johnson, E.C., Nokes, J.P.: Non Destructive Evaluation (NDE) Techniques Assessment for Graphite Epoxy (Gr/Ep) Composite Overwrapped Pressure Vessel. Air Force Report, Los Angeles, No. TR-98(8504)-3 (1998)
Song, S.-J., Choe, J.-U., Bae, D.-H.: An experimental study on elastic wave propagation in a filament-wound composite motor case for acoustic emission during hydroproof testing. JSME Int. J. Ser. A 44(2), 267–275 (2001)
Dion, S.A.T.: MSAE thesis, Embry-Riddle Aeronautical University, Daytona Beach (2006)
Hill, E.v.K., Dion, S.-A.T., Karl, J.O., Spivey, N., Walker II, J.L.: Neural network burst pressure prediction in composite over wrapped pressure vessels. In: Advances in Acoustic Emission, ICAE-6 (2007)
Hill, E.v.K., Dion, S.-A.T., Karl, J.O., Spivey, N.S., Walker II, J.L.: Neural network burst pressure prediction in composite overwrapped pressure vessels. J. Acoust. Emiss. 25, 187–193 (2008)
STP-PT-021 Book: Nondestructive Testing and Evaluation Methods for Composite Hydrogen Tanks (2008)
Raj, B., Jayakumar, T., Mukhopadhyay, C.K.: NDE—a few challenging problems and solutions. J. Non-Destr. Test. Eval. 7, 20–29 (2009)
Bunsella, A.R., Thionnetab, A.: Life prediction for carbon fibre filament wound composite structures. Philos. Mag. 90(31–32), 4129–4146 (2010)
Hill, E.v.K., Walker II, J.L., Dorfman, M.D.: Acoustic emission data and neural network analysis. In: ASNT Industry Handbook: Aerospace NDT. American Society for Nondestructive Testing, Columbus, OH (accepted) (2010)
Hill, E.v.K., Karl, J.O., Dion, S.-A.T., Spivey, N.S., Walker II, J.L.: Neural network burst pressure predictions in composite overwrapped pressure vessels. In: ASNT Industry Handbook: Aerospace NDT. American Society for Nondestructive Testing, Columbus, OH (accepted) (2010)
Williams, J.H., Lee, S.S.: Acoustic emission monitoring of fibre composite materials and structures. J. Compos. Mater. 12, 348–370 (1978)
Mehan, R.L., Mullin, J.V.: Analysis of composite failure mechanisms using acoustic emission. J. Compos. Mater. 5, 266–269 (1971)
Rollins, F.R.: Acoustic Emission from Boron Aluminum Composite During Tensile Fracture and Fatigue. Report No. TR-6, Midwest Research Institute, October 1971
Hamstand, M.A., Chiao, T.T.: Acoustic emission term stress rapture and fatigue on an organic fiber composite. In: Composite Reliability. ASTM, PA, ASTM STP 580, pp. 191–201 (1975)
Hamstad, M.A., Chiao, T.T.: Structural integrity of fiber epoxy vessels by acoustic emission. SAMQA 8(1), 31–45 (1976)
Jesson, E.C., Spanhiemer, H.: Prediction of Composite Pressure Vessel Performance by Application of the Kaiser effect in Acoustic Emissions. AET Corporation, June 1975
Ono, K.: Amplitude distribution analysis of AE signals. Mater. Eval. 34, 177–181 (1976)
Bunsell, A.R.: Acoustic emission for proof testing of carbon fibre-reinforced plastics. In: NDT International, February 1977
Williams, J.H., Jr., Egan, D.M.: Spectral analysis of fibre composite failure mechanisms. Mater. Eval. 1, 43–47 (1979)
Brown, T.S., Mitchell, J.R.: Proceedings of the 35th Conference of the Reinforced Plastics and Composites Institute, USA, Paper 26-B (1980)
Stephens, R.W.B., Kim, H.C.: A study of the nuclear reactor safety. KAERI/RR-499/84, pp. 155–161 (1982)
Plen, W.M., et al.: Advanced method for damage analysis in graphite–epoxy composites. SAMPE Q. October 1982
Williams, J.H., Jr., Lee, S.S.: Acoustic emission characterization using AE (Parameter) delay. Mater. Eval. 7, 961–966 (1983)
Pollock, A.A.: Acoustic emission amplitude distributions. Int. Adv. Non-destructive Test. 7, 215–240 (1981)
McNally, D.J.: Inspection of rocket motor cases using acoustic emission. Mater. Eval. 5, 728–739 (1985)
Berthelot, J.M.: Fracture mechanisms characterization in discontinuous fibre composites using AE amplitudes. J. Acoust. Emiss. 2, 178 (1985)
Wevers, M., et al.: Analysis of fatigue damage in carbon fibre reinforced epoxy composites, by means of acoustic emission: setting up of a damage accumulation theory. J. Acoust. Emiss. 2/3, 186 (1985)
Humphrey, W.D., New House, N.L.: The standard test and evaluation bottle (STEB) five years later. SAMDE J. July/Aug, 19–23 (1986)
Rao, A.K., Murthy, C.R.L.: A Strategy for Reliability by Monitoring Acoustic Emission for Incipient Failures. Department of Aeronautical Engineering, IISC, Bangalore
Kam, T.Y., Liu, Y.W., Lee, E.T.: First-ply failure strength of laminated composite pressure vessels. Compos. Struct. 38(1–4), 65–70 (1997)
Navel Sea System: Acoustic Emission of Periodic Inspector of Composite Pressure Vessels. R and D Research Report, Report No. 120104
Hill, E.v.K., Lewis, T.J.: Acoustic emission burst pressure prediction in 5.75 inch diameter fiber glass epoxy pressure vessels. In: Proceedings at 35th International SAMPE Symposium and Exhibition. Society for the Advancement of Material and Process Engineering, Covina, CA, pp. 2189–2201 (1990)
Johansen, D., Sornette, D.: Critical ruptures. Eur. Phys. J. B 18(1), 163–181 (2000)
Chang, D.J., Katzman, H.A., Nokes, J.P., Adams, P.M., Amimoto, S.T., Valenzuela, P.R., Albright, T.V., Joseph, P.L., Pollock, P.B., Coulter, B.A., Ratner, J.K.: Burst Testing of Filament Wound Graphite Epoxy Cylindrical Tubes. Aerospace Corporation, Report No. TR. 2001(1413)-3, November 2002
Hill, E.v.K.: Acoustic emission prediction of burst pressures in fiberglass epoxy pressure vessels. In: Miller, R.K., Hill, E.v.K., (technical eds.), Moore, P.O. (ed.), Nondestructive Testing Handbook, 3rd edn., vol. 6, Acoustic Emission Testing, pp. 383–390. American Society for Nondestructive Testing, Columbus, OH (2005)
Lung, B.C.: A structural health monitoring system for composite Pressure vessels. M.S. thesis (2005)
Jessen, E.C., Spanheimen, H., De Herrera, A.J.: Prediction of Composite Pressure Vessel Performance by Application of the ‘Kaiser Effect’ in Acoustic Emissions. AET Corporation, USA (1974)
Lark, R.F., Moorhead, P.E.: Acoustic Emission Testing of Composite Vessels Under Sustained Loading. NASA TM-78981, NASA, Lewis Res. Ctr., Cleveland, OH (NTIS: n78-33150), October 1978
Narisawa, I., Oba, T.: An evaluation of acoustic emission from fiber reinforced composite. J. Mater. Sci. 20(32), 4527–4531 (1985)
Filho, P.H., Da Costa, L.E.V.L.: Non destructive testing on glass fibre pressure vessels using acoustic emission. In: The 10th International Acoustic Emission Symposium, Japan, pp. 273–279, 22–25 October 1990
Mouhamath, B., Bunsell, A.R.: Acoustic emission filament reinforced metallic-spherical pressure vessels. In: The 10th International Acoustic Emission Symposium, Japan, pp. 280–284, 22–25 October 1990
Cohen, D., Mantell, S.C., Zhao, L.: The effect of fiber volume fraction on filament wound composite pressure vessel strength. Composites B 32, 413–429 (2001)
Tsimogiannis, A., Nikolaidis,V., Anastassopoulos, A., Filho, P.: Hydrogen cylinder acoustic emission testing and data evaluation with supervised pattern recognition. NDT.net, September 2002, 7(9)
Kostreva, K.M., Hill, E.v.K.: Classification of acoustic emission data from graphite/epoxy failure mechanisms using neural networks. In: Fourth International Conference on Nonlinear Problems in Aviation and Aerospace, European Conference Publications, Cambridge, pp. 281–288 (2003)
Hill, E.v.K., Demeski, R.J.: Classification of failure mechanism data from fiberglass epoxy tensile specimens. In: Miller, R.K., Hill, E.v.K. (technical eds.), Moore, P.O. (ed.) Nondestructive Testing Handbook, 3rd edn., vol. 6. Acoustic Emission Testing, pp. 167–171. American Society for Nondestructive Testing, Columbus, OH (2005)
Phoenix, S.L. et al.: Reliability modeling of the stress-rupture performance of Kevlar® 49/epoxy pressure vessels: revisiting a large body stress rupture data to develop new insights. In: The 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI (to appear) (2006)
Grimes-Ledesma, L., et al.: Testing and analysis of carbon fiber composite overwrapped pressure vessel stress rupture lifetime. In: The 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI (to appear) (2006)
Thesken, J., et al.: A theoretical investigation of composite overwrapped pressure vessel mechanics applied to the shuttle transportation system full scale tests. In: Proceedings of the American Society for Composites-20th Technical Conference, September 2006
Yu, Y.H., Choi, J.H., Kweon, J.H., Kim, D.H.: A study on the failure detection of composite materials using acoustic emission. Compos. Struct. 75, 163–169 (2006)
Saulsberry, R., et al.: Nondestructive methods supporting NASA composite overwrapped pressure vessel assessment. In: The 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI (2006)
Greene, N., et al.: Experimental investigation of NASA composite overwrapped pressure vessels for stress rupture life. In: The 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI (to appear) (2006)
Tong, L.L., Wang, Z.Q., Chen, S.H., Sun, B.H.: Advances in fracture and damage mechanics VI: progressive failure analysis of composite pressure vessels by finite element method. Key Eng. Mater. 348–349, 133–136 (2007)
Tscheliesnig, P.: The European standardisation in the field of AE testing. In: Proceedings of the International Conference NDT for Safety, Prague, pp. 277–283 (2007)
Madhavi, M., Rao, K.V.J., Narayana Rao, K.: Design and analysis of filament wound composite pressure vessel with integrated end domes. Def. Sci. J. 59(1), 73–81 (2009)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Joselin, R., Chelladurai, T. Burst Pressure Prediction of Composite Pressure Chambers Using Acoustic Emission Technique: A Review. J Fail. Anal. and Preven. 11, 344–356 (2011). https://doi.org/10.1007/s11668-011-9459-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-011-9459-7