Advertisement

Journal of Failure Analysis and Prevention

, Volume 8, Issue 2, pp 183–187 | Cite as

Filter Debris Analysis for Aircraft Engine and Gearbox Health Management

  • Allison M. Toms
  • Karen Cassidy
Technical Article---Peer-Reviewed

Abstract

Oil filters capture a tremendous amount of tribology information about the operation of a machine. Removal and analysis of the filter debris has proved to be an effective tool for engine health management by determining wear modes and observing failure progression providing long lead times for maintenance remediation. The process of manual debris removal and analysis in a laboratory, however, is tedious. An automated filter debris analysis system provides a repeatable process for at-line or laboratory use. The filters are automatically cleaned; the particles are counted and sized utilizing a quantitative oil debris sensor; and the debris is deposited on a patch for automatic analysis by an integral energy dispersive X-ray fluorescence spectrometer. The XRF analysis procedure provides metallurgical analysis and an expert determination of engine condition. The system has been successfully applied to two operational aircraft fleets, the Canadian Forces S-61 Sea King helicopter fleet and the US Navy EA-6B Prowler aircraft fleet. In both applications, significant benefits have been realized.

Keywords

Condition based maintenance Debris sensor Engine health management Filter debris analysis Operational uptime Wear modes 

References

  1. 1.
    Bhachu, R., Sayles, R.: The Influence of Filtration on Rolling Element Bearing Life, pp. 326–347. MFPG/National Bureau of Standards Meeting, Washington (1984)Google Scholar
  2. 2.
    Veinot, D.E., Fisher, G.C.: Wear Debris Examination as a Condition Monitoring Technique for the Sikorsky Sea King Helicopter Main Gearbox, pp. 119–131. STLE Special Publication SP-27, May (1989)Google Scholar
  3. 3.
    Fisher, G.C.: Accuracy of Filter Debris Analysis in Assessing Wear Condition of Sea King Main Gearboxes, DREA Note DL/91/6, September (1996)Google Scholar
  4. 4.
    Mason, D.A.: Delaying Obsolescence. Keynote Address, Canadian Machinery Vibration association, AGM, Oct (2003)Google Scholar
  5. 5.
    Fisher, G.C., Rance, E.: Evaluation of the GasTOPs™ Deployable Filter Debris Analysis (DFDA) Prototype. QETE Project No. A027894, July (1997)Google Scholar
  6. 6.
    Muir, D.M., Howe, B.: In-line Oil Debris Monitor (ODM) for the Advanced Tactical Fighter Engine. SAE Paper 961308, May (1996)Google Scholar
  7. 7.
    Miller, J.L., Kitaljevich, D.: In-Line Oil Debris Monitor for Aircraft Engine Condition Assessment. IEEE, 0-7803-5846-5 (2000)Google Scholar
  8. 8.
    Donahue, A.: Filter Debris Analysis, A Reliable First Line Condition Monitoring Tool. Presented at the Canadian Machinery Vibration Association’s Annual Conference (2004)Google Scholar
  9. 9.
    Humphrey, G.R.: Characterization of Debris from F404 Engine Oil Filters by Energy Dispersive X-ray Fluorescence. JOAP-TSC-TR-96-02 (1996)Google Scholar
  10. 10.
    Humphrey, G.R., Rojas, J., Churchill, D.C., Gorzen, D., Cross, B.: Prototype Instruments Built for PRAM. In: Humphrey, G. (ed.) Proc. 2002 JOAP International Condition Monitoring Conference. JOAP-TSC, Pensacola, FL, Apr (2002)Google Scholar
  11. 11.
    Humphrey, G.R. et al.: Filter Debris Analysis of J52-P-408 Engines, Part I. In: Humphrey, G. (ed.) Proc. 2002 JOAP International Condition Monitoring Conference. JOAP-TSC, Pensacola, FL, Apr (2002)Google Scholar
  12. 12.
    Toms, A.M., Humphrey, G.R., Jordan, E.: The Success of Filter Debris Analysis for J52 Engine Condition Based Maintenance. 41st AIAA-ASME-SAE-ASEE, Joint Propulsion Conference, AIAA-2005-4338, Tucson, AZ, July (2005)Google Scholar
  13. 13.
    Lastinger, W., Overman, R., Yates, L.: Finding bearing failure through filter debris analysis. RIAC J., 1st Qtr 14(1), 8–12 (2006)Google Scholar

Copyright information

© Society for Machinery Failure Prevention Technology 2007

Authors and Affiliations

  1. 1.GasTOPS Inc.PensacolaUSA

Personalised recommendations