Advertisement

Journal of Failure Analysis and Prevention

, Volume 7, Issue 6, pp 381–385 | Cite as

The Importance of Sample Taking in Failure Analysis of Paints and Coatings

  • Dwight G. Weldon
Feature
  • 85 Downloads

Many expensive-sounding analytical tools help an experienced investigator determine the cause of a coating failure. For example, infrared spectroscopy can determine such things as coating type, contamination, and mix ratio; gas chromatography can detect residual solvents in paint chips and blister liquid; differential scanning calorimetry can measure relative degree of cure; and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) can detect and characterize inclusions, debris, and failure planes. However, the best-equipped laboratory is still limited by the type and quality of the samples that it has to work with. This article will discuss the type of samples needed for failure analysis, and give suggestions on how to obtain them.

Before Sampling

Because of the extreme variety of coating types, substrates, and environments, there is no “cookbook” method for conducting a failure analysis. Consequently, there is no cookbook procedure for sample taking. The...

Keywords

Attenuate Total Reflectance Sharp Knife Attenuate Total Reflectance Spectrum Paint Chip Liquid Paint 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Copyright information

© Technology Publishing/Paintsquare 2007

Authors and Affiliations

  • Dwight G. Weldon
    • 1
  1. 1.Weldon Laboratories Inc.ImperialUSA

Personalised recommendations