Advertisement

Practical failure analysis

, Volume 1, Issue 1, pp 55–64 | Cite as

Influence of Plasma Spray Parameters on the Cracking Behavior of Yttria Stabilized Zirconia Coatings

  • A. Kucuk
  • C.G. Dambra
  • C.C. Berndt
Article

Abstract

Thermal spray coatings enhance the material properties of substrates but this attribute may be negated if the coatings themselves fail. This paper investigates the performance of an important family of coatings as one step in improving the resistance of the coating/substrate system to mechanical failure. Thermal barrier coatings of yttria partially stabilized zirconia (YSZ) with a NiCrAlY bond coat were air plasma sprayed onto mild-steel substrates. The spray process parameters were varied according to top and bond coat thickness, stand off distance, and substrate temperature. These 17 groups of coating types, with six identical samples in each group, were four point bend tested while coupled with an in-situ acoustic emission transducer. Optical microscopy was then used to examine and map the resulting crack patterns. Measurements of the number of cracks, crack separation, delaminating length, and micro-crack density were also made. The combination of this information, along with properties obtained from the four point bend tests and acoustic emission signals, provided insight into the cracking and delaminating processes.

Keywords

Acoustic Emission Thermal Spray Bond Coat Thermal Barrier Coating Acoustic Emission Energy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© ASM International 2001

Authors and Affiliations

  1. 1.Department of Materials Science and Engineering, State University of New York at Stony Brook, 306 Old EngineeringStony Brook, NY 11794-2275USA

Personalised recommendations