Functional Properties of Porous Ti-48.0 at.% Ni Shape Memory Alloy Produced by Self-Propagating High-Temperature Synthesis

Article
  • 9 Downloads

Abstract

The functional behavior of the porous shape memory alloy produced by self-propagating high-temperature synthesis from the Ti-48.0 at.% Ni powder mixture was studied. It was found that a large unelastic strain recovered on unloading and it was not attributed to the pseudoelasticity effect. A decrease in deformation temperatures did not influence the value of strain that recovered on unloading, while the effective modulus decreased from 1.9 to 1.44 GPa. It was found that the porous Ti-48.0 at.% Ni alloy revealed the one-way shape memory effect, where the maximum recoverable strain was 5%. The porous Ti-48.0 at.% Ni alloy demonstrated the transformation plasticity and the shape memory effects on cooling and heating under a stress. An increase in stress did not influence the shape memory effect value, which was equal to 1%. It was shown that the functional properties of the porous alloy were determined by the TiNi phase consisted of the two volumes Ti49.3Ni50.7 and Ti50Ni50 where the martensitic transformation occurred at different temperatures. The results of the study showed that the existence of the Ti49.3Ni50.7 volumes in the porous Ti-48.0 at.% Ni alloy improved the functional properties of the alloy.

Keywords

mechanical behavior porous TiNi shape memory alloy self-propagating high-temperature synthesis shape memory effects 

Notes

Acknowledgments

The study has been carried out through the financial support by Russian Foundation for Basic Research (Project Number 15-08-05021-a). Authors thank to Roman Badun for the participation in experiments.

References

  1. 1.
    A. Bansiddhi, T.D. Sargeant, S.I. Stupp, and D.C. Dunand, Porous NiTi for Bone Implants: A Review, Acta Biomater., 2008, 4, p 773–782CrossRefGoogle Scholar
  2. 2.
    C.E. Wen, J.Y. Xiong, Y.C. Li, and P.D. Hodgson, Porous Shape Memory Alloy Scaffolds for Biomedical Applications: A Review, Phys. Scr., 2010,  https://doi.org/10.1088/0031-8949/2010/t139/014070 Google Scholar
  3. 3.
    A. Kennedy, Porous Metals and Metal Foams Made from Powders, Powder Metallurgy, K. Kohdoh, Ed., InTech, Croatia, 2012. https://www.intechopen.com/books/powder-metallurgy
  4. 4.
    B. Yuan, X.P. Zhang, M. Zhu, M.Q. Zeng, and C.Y. Chung, A Comparative Study of the Porous TiNi Shape-Memory Alloys Fabricated by Three Different Processes, Met. Mater. Trans. A, 2006, 37, p 755–761CrossRefGoogle Scholar
  5. 5.
    J.Y. Xiong, Y.C. Li, X.J. Wang, P.D. Hodgson, and C.E. Wen, Titanium-Nickel Shape Memory Alloy Foams for Bone Tissue Engineering, J. Mech. Behav. Biomed. Mater., 2008, 1, p 269–273CrossRefGoogle Scholar
  6. 6.
    V. Brailovski, S. Prokoshkin, M. Gauthier, K. Inaekyan, S. Dubinskiy, M. Petrzhik, and M. Filonov, Bulk and Porous Metastable Beta Ti-Nb-Zr(Ta) Alloys for Biomedical Applications, Mater. Sci. Eng., C, 2011, 31, p b643–657CrossRefGoogle Scholar
  7. 7.
    V. Brailovski, S. Prokoshkin, M. Gautheir, K. Inaekyan, and S. Dubinskiy, Mechanical Properties of Porous Metastable Beta Ti-Nb-Zr Alloy for Biomedical Applications, J. Alloys Compd., 2013, 557S, p S413–S417CrossRefGoogle Scholar
  8. 8.
    P. Mossino, Some Aspects in Self-Propagating High-Temperature Synthesis, Ceram. Int., 2004, 30, p 311–332CrossRefGoogle Scholar
  9. 9.
    V.I. Itin, V.N. Khachin, A.D. Bratchikov, V.E. Gyunter, E.F. Dudarev, T.V. Monasevich, D.B. Chernov, G.D. Timonin, and A.P. Paperskii, Structure and Properties of Titanium Nickelide Materials made by Self-Propagating High-Temperature Synthesis, Sov. Phys. J., 1977, 20, p 1631–1633CrossRefGoogle Scholar
  10. 10.
    A.D. Bratchikov, A.G. Merzhanov, V.I. Itin, V.N. Khachin, E.F. Dudarev, V.E. Gyunter, V.M. Maslov, and D.B. Chernov, Self-Propagating High-Temperature Synthesis of Titanium Nickelide, Sov. Powder Metall. Met. Ceram., 1980, 19, p 5–8Google Scholar
  11. 11.
    V.I. Itin, V.N. Khachin, V.E. Gyunter, A.D. Bratchikov, and D.B. Chernov, Production of Titanium Nickelide by Self-Propagating High-Temperature Synthesis, Sov. Powder Metall. Met. Ceram., 1983, 22, p 156–157Google Scholar
  12. 12.
    K. Otsuka and X. Ren, Physical Metallurgy of Ti-Ni Based Shape Memory Alloys, Progress Mater. Sci., 2005, 50, p 511–678CrossRefGoogle Scholar
  13. 13.
    V.E. Gyunter, YuF Yasenchuk, A.A. Klopotov, and V.N. Khodorenko, The Physicomechanical Properties and Structure of Superelastic Porous Titanium Nickelide-Based Alloys, Tech. Phys. Lett., 2000, 26, p 35–39CrossRefGoogle Scholar
  14. 14.
    B.Y. Li, L.J. Rong, Y.Y. Li, and V.E. Gjunter, Synthesis of Porous Ni-Ti Shape Memory Alloys by Self-Propagating High-Temperature Synthesis: Reaction Mechanism and Anisotropy in Pore Structure, Acta Mater., 2000, 48, p 3895–3904CrossRefGoogle Scholar
  15. 15.
    C.Y. Chung, C.L. Chu, and S.D. Wang, Porous TiNi Shape Memory Alloy with High Strength Fabricated by Self-Propagating High-Temperature Synthesis, Mater. Lett., 2004, 58, p 1683–1686CrossRefGoogle Scholar
  16. 16.
    C.L. Chu, J.C.Y. Chung, and P.K. Chu, Effects of Heat Treatment on Characteristics of Porous Ni-Rich NiTi SMA Prepared by SHS Technique, Trans. Nonferrous Met. Soc. China, 2006, 16, p 49–53CrossRefGoogle Scholar
  17. 17.
    G. Tosun, L. Ozler, M. Kay, and N. Orhan, A Study on Microstructure and Porosity of NiTi Alloy Implants Produced by SHS, J. Alloys Compd., 2009, 487, p 605–611CrossRefGoogle Scholar
  18. 18.
    S. Wisutmethangoon, N. Denmud, and L. Sikong, Characteristics and Compressive Properties of Porous NiTi Alloy Synthesized by SHS Technique, Mater. Sci. Eng., A, 2009, 515, p 93–97CrossRefGoogle Scholar
  19. 19.
    P. Bassani, P. Giuliani, A. Tuissi, and C. Zanotti, Thermomechanical Properties of Porous NiTi Alloy Produced by SHS, J. Mater. Eng. Perform., 2009, 18, p 594–599CrossRefGoogle Scholar
  20. 20.
    M. Kaya, N. Orhan, and G. Tosun, The Effect of the Combustion Channels on the Compressive Strength of Porous NiTi Shape Memory Alloy Fabricated by SHS as Implant Material, Curr. Opin. Solid State Mater. Sci., 2010, 14, p 21–25CrossRefGoogle Scholar
  21. 21.
    N. Resnina, S. Belyaev, A. Voronkov, A. Krivosheev, and I. Ostapov, Peculiarities of Mechanical Behaviour of Porous TiNi Alloy, Prepared by Self-Propagating High-Temperature Synthesis, Mater. Sci. Eng., A, 2010, 527, p 6364–6367CrossRefGoogle Scholar
  22. 22.
    N. Resnina, S. Belayev, and A. Voronkov, Influence of Chemical Composition and Pre-heating Temperature on the Structure and Martensitic Transformation in Porous TiNi-Based Shape Memory Alloys, Produced by self-Propagating High-Temperature Synthesis, Intermetallics, 2013, 32, p 81–89CrossRefGoogle Scholar
  23. 23.
    C.A. Biffi, P. Bassani, Z. Sajedi, P. Giuliani, and A. Tuissi, Laser ignition in Self-propagating High Temperature Synthesis of Porous NiTinol Shape Memory Alloy, Mater. Lett., 2017, 193, p 54–57CrossRefGoogle Scholar
  24. 24.
    M. Kaya and O. Cakmak, Shape Memory Behavior of Porous NiTi Alloy, Met. Mater. Trans. A, 2017, 48, p 1499–1503CrossRefGoogle Scholar
  25. 25.
    V.N. Khodorenko and V.E. Gyunter, Investigations of the Structure of Porous Titanium Nickelide After Thermal Treatment, Russ. Phys. J., 2008, 51, p 1090–1096CrossRefGoogle Scholar
  26. 26.
    C. Zanotti, P. Giuliani, P. Bassani, F. Passaretti, A. Tuissi, Characterization of Porous NiTi Alloys Produced by SHS, in Proceedings of the International Conference on Shape Memory and Superelastic Technologies (May 7–11, 2006, Pacific Grove, California, USA, Brian Berg, M.R. Mitchell, and Jim Proft, editors), (2008). p. 373–380Google Scholar
  27. 27.
    N. Resnina and S. Belyaev, Influence of Annealing on Martensitic Transformations in Porous TiNi-Based Alloys Produced by Self-Propagating High-Temperature Synthesis, J. Alloys Compd., 2013, 577S, p S159–S163CrossRefGoogle Scholar
  28. 28.
    N. Resnina, S. Belyaev, A. Voronkov, and A. Gracheva, Mechanical Behaviour and Functional Properties of Porous Ti-45 at.% Ni Alloy Produced by Self-Propagating High-Temperature Synthesis, Smart Mater. Struct., 2016, 25, p 055018CrossRefGoogle Scholar
  29. 29.
    N. Resnina, S. Belyaev, A. Voronkov, and R. Badun, Shape Memory Effects in Porous Ti-45.0at.% Ni Alloy Produced by Self-Propagating High-Temperature Synthesis, Mater. Today: Proc., 2017, 4, p 4690–4695CrossRefGoogle Scholar
  30. 30.
    K.N. Melton and O. Mercier, The Mechanical Properties of NiTi-Based Shape Memory Alloys, Acta Metall., 1981, 29, p 393–398CrossRefGoogle Scholar
  31. 31.
    Y. Liu and D. Favier, Stabilisation of Martensite Due to Shear Deformation Via Variant Reorientation in Polycrystalline NiTi, Acta Mater., 2000, 48, p 3489–3499CrossRefGoogle Scholar

Copyright information

© ASM International 2018

Authors and Affiliations

  • Natalia Resnina
    • 1
  • Sergey Belyaev
    • 1
  • Andrew Voronkov
    • 2
  1. 1.Saint Petersburg State UniversitySt. PetersburgRussia
  2. 2.OOO “Alfa Technology”St. PetersburgRussia

Personalised recommendations