Abstract
Carrier sweepout is one of the many phenomena that limit critical performance metrics of mid-wave infrared (MWIR) photodetectors, such as the photoconductive gain (γ), photoresponsivity (η), specific detectivity (D*), and hence the overall performance of cameras built using these detectors. Preventing carrier sweepout in photoconductors at high applied bias and modulation frequencies can increase the electrical operating bias range and consequently expand the possible read-out integrated circuit design space and capabilities. Polycrystalline PbSe-based MWIR photodetectors have shown great potential for building integrated high-performance devices. We discuss herein the choice of metallic contacts for such detectors built by Northrop Grumman Systems Corp. under this program using the complex physics of carrier trapping and the interface of the contact metal with the photosensitive PbSe film that allows these detectors to be essentially free of carrier sweepout even at high applied electric fields.
Similar content being viewed by others
References
A. Rogalski, Infrared Phys. Technol. 43, 187 (2002).
B. Weng, J. Qiu, L. Zhaoa, Z. Yuana, C. Changa, and Z. Shi, Proc. SPIE 8993, 899311–1 (2014).
G. Roelkens, U. Dave, A. Gassenq, N. Hattasan, C. Hu, B. Kuyken, F. Leo, A. Malik, M. Muneeb, E. Ryckeboer, S. Uvin, Z. Hens, R. Baets, Y. Shimura, F. Gencarelli, B. Vincent, R. Loo, J.V. Campenhout, L. Cerutti, J.-B. Rodriguez, E. Tourni, X. Chen, M. Nedeljkovic, G. Mashanovich, L. Shen, N. Healy, A.C. Peacock, X. Liu, R. Osgood, and W. Green, Opt. Mater. Express 3, 1523 (2013).
A. Konczakowska and B.M. Wilamowski, Fundamentals of Industrial Electronics, ed. B.M. Wilamowski and J.D. Irwin (Taylor & Francis, 2011), p. 11–1.
A. Rogalski, Infrared Detectors (Boca Raton: CRC Press, 2010).
S. Ganguly, M. Jang, Y. Tan, S.-S. Yoo, M.C. Gupta, and A.W. Ghosh, A Multiscale Materials-to-Systems Modeling of Polycrystalline Pb-Salt Photodetectors. arXiv:1806.02933 [cond-mat], June 2018. arXiv: 1806.02933.
L. Zhao, J. Qiu, B. Weng, C. Chang, Z. Yuan, and Z. Shi, J. Appl. Phys. 115, 084502 (2014).
J.N. Humphrey and R.L. Petritz, Phys. Rev. 105, 1736 (1957).
B. Gaury and P.M. Haney, Phys. Rev. Appl. 8, 054026 (2017).
R.L. Petritz, Phys. Rev. 104, 1508 (1956).
P.C. Datskos and N.V. Lavrik, Expanding the Vision of Sensor Materials, ed. National Research Council (Washington, DC: National Academy Press, 2011).
D.L. Smith, J. Appl. Phys. 56, 1663 (1984).
V.L. Rideout, Solid State Electron. 18, 541 (1975).
D.K. Schroder, Semiconductor Material and Device Characterization, 3rd ed. (Hoboken: Wiley, 2006).
D.P. Kennedy and P.C. Murley, IBM J. Res. Dev. 12, 242 (1968).
T. Valet and A. Fert, Phys. Rev. B 48, 7099 (1993).
A. Goetzberger, J. Knobloch, and B. Vosch, The physics of solar cells, in Crystalline Silicon Solar Cells (Wiley, 2014), p. 67.
S.-S. Yoo, J. Lee, C. Kauffman, T.K. Steinbach, P. Martin, J. Tucek, and S. An, High-operating temperature MWIR photodetector development using polycrystalline PbSe technology, The US Workshop on the Physics & Chemistry of II–VI Materials (Chicago, IL, 2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ganguly, S., Yoo, SS. On the Choice of Metallic Contacts with Polycrystalline PbSe Films and Its Effect on Carrier Sweepout and Performance in Mid-wave Infrared (MWIR) Photodetectors. J. Electron. Mater. 48, 6169–6175 (2019). https://doi.org/10.1007/s11664-019-07557-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-019-07557-0