Advertisement

Environmental Science and Pollution Research

, Volume 25, Issue 28, pp 27839–27857 | Cite as

A review on the direct effect of particulate atmospheric pollution on materials and its mitigation for sustainable cities and societies

  • Hanadi Al-Thani
  • Muammer Koç
  • Rima J. IsaifanEmail author
Review Article

Abstract

Particulate matter (PM) has gained significant attention due to the increasing concerns related to their effects on human health. Although several reviews have shed light on the effect of PM on human health, their critical adverse effect on material’s structure and sustainability was almost neglected. The current study is an attempt to fill this gap related to PM impact on structural materials under the overall consideration of sustainability. More specifically, this review highlights the existing knowledge by providing an overview on PM classification, composition, and sources in different locations around the world. Then, it focuses on PM soiling of surfaces such as solar panels due to an increasing need to mitigate the impact of soiling on reducing photovoltaic (PV) power output and financial competitiveness in dusty regions. This topic is of critical importance for sustainable deployment of solar energy in arid and desert areas around the world to help in reducing their impact on overall climate change and life quality. In addition, this review summarizes climate change phenomena driven by the increase of PM concentration in air such as radiative forcing and acid rain deposition due to their impact on human health, visibility and biodiversity. To this end, this work highlights the role of process management, choice of fuel, the implementation of clean technologies and urban vegetation as some possible sustainable mitigation policies to control PM pollution in cities and urban regions. This research is designed to conduct a comprehensive narrative literature review which targets broad spectrum of readers and new researchers in the field. Moreover, it provides a critical analysis highlighting the need to fill main research gaps in this domain. The findings of this review paper show that PM pollution imposes severe adverse impacts on materials, structures and climate which directly affect the sustainability of urban cities. The advantages of this review include the value of the extensive works that elaborate on the negative impacts of PM atmospheric pollution towards high level of public awareness, management flexibility, stakeholder’s involvements, and collaboration between academy, research, and industry to mitigate PM impact on materials and human welfare.

Keywords

Air quality Particulate matter Atmospheric pollution Materials Soiling Solar 

Notes

Author contributions

H. A., M. K., and R. I. contributed to writing the article.

Compliance with ethical standards

Competing interests

The authors declare no competing financial interests.

Supplementary material

11356_2018_2952_MOESM1_ESM.docx (637 kb)
ESM 1 (DOCX 636 kb)

References

  1. Azali: Afzali, A & Rashid, Mariyah & Baharun, Sabariah & Mat, Ramli. (2014). PM10 pollution: its prediction and meteorological influence in PasirGudang, Johor. IOP Conference Series: EESGoogle Scholar
  2. Agarwal A, Gupta T, Kothari A (2011) Particulate emissions from biodiesel vs diesel fuelled compression ignitions engine. Renew Sust Energ Rev 15:3278–3300CrossRefGoogle Scholar
  3. Aissa B, Isaifan RJ, Abdulla A, Madhavan V (2016) Structural and physical properties of the desert-dust particles and their influence on the PV panels performance in Qatar. Sci Rep 6:31467CrossRefGoogle Scholar
  4. Alharbi B, Shareef MM, Husain T (2015) Study of chemical characteristics of particulate matter concentrations in Riyadh, Saudi Arabia. Atmos Pollut Res 6:88–98CrossRefGoogle Scholar
  5. Anderson J, Thundiyil J, Stolbach A (2012) Clearing the air: a review of the effects of particulate matter air pollution on human health. J Med Toxicol 8:166–175CrossRefGoogle Scholar
  6. Arslan S, Aybek A (2012) Particulate Matter Exposure in Agriculture. IntechOpen 10:73–104Google Scholar
  7. Azarov V, Sergina N, Sidyakin P, Kovtunov I (2015) Seasonal variations in the content of dust particles PM10 and PM2.5 in the air of resort cities depending on intensity transport traffic and other conditions. IOP Conference Series: EES. 90:1–10Google Scholar
  8. Beattie NS, Moir RS, Chacko C, Buffoni G, Roberts SH, Pearsall NM (2012) Understanding the effects of sand and dust accumulation on photovoltaic modules. Renew Energy 48:448–452CrossRefGoogle Scholar
  9. Bell D, Jayne M (2009) Small cities? Towards a research agenda. Int J Urban Reg Res 33:683–699CrossRefGoogle Scholar
  10. Beloin NJ, Haynie FH (1975) Soiling of building materials. J Air Pollut Control Assoc 25:399–417CrossRefGoogle Scholar
  11. Bergin MH, Ghoroi C, Dixit D, Schauer JJ, Shindell DT (2017) Large reductions in solar energy production due to dust and particulate air pollution. Environ Sci Technol Lett 4:339–344CrossRefGoogle Scholar
  12. Bhattacharjee H, Drescher M, Good T, Hartley Z, Leza J, Lin B, Moss J, Massey R, Nishino T, Ryder S, Sachs N, Tozan Y, Taylor C, Wu D (1999) Particulate matter in New Jersey. Princeton, NJGoogle Scholar
  13. Blumberg KO, Walsh MP, Pera C (2003) Low sulfur gasoline and diesel: the key to lower vehicle emissions. California, USA, pages 1–66Google Scholar
  14. Bozbas K (2008) Biodiesel as an alternative motor fuel: production and policies in the European Union. Renew Sust Energ Rev 12:542–552CrossRefGoogle Scholar
  15. Bunnik T, De Clercq H, van Hees RPJ, Schellen HL, Schueremans L (eds). 2010. Effect of climate change on built heritage. WTA-Schriftenreihe; Pfaffenhofen: WTA-Publications 34:70–76Google Scholar
  16. Chow J, Watson J, Lowenthal D, Solomon P, Magliano K, Ziman S, Richard L (1992) PM10 source appointment in California’s San Joaquin Valley. Atmos Environ 26A:3335–3354CrossRefGoogle Scholar
  17. Cleaver JAS, Tyrrell JWG (2004) The influence of relative humidity on particle adhesion. KONA Powder Part J 22:9–22CrossRefGoogle Scholar
  18. Clements AL, Fraser MP, Upadhyay N, Herckes P, Sundblom M, Lantz J, Solomon PA, Fraser MP (2014) Chemical characterization of coarse particulate matter in the Desert Southwest—Pinal County Arizona, USA. Atmos Pollut Res 5:52–61CrossRefGoogle Scholar
  19. Dallmann TR, Onasch TB, Kirchstetter TW, Worton DR, Fortner EC, Herndon SC, Wood EC (2014) Characterization of particulate matter emissions from on-road gasoline and diesel vehicles using a soot particle aerosol mass spectrometer. Atmos Chem Phys 14:7585–7599CrossRefGoogle Scholar
  20. Davy P, Ancelet T, Trompetter W, Markwitz A, Weatherburn D (2012) Composition and source contributions of air particulate matter pollution in a New Zealand suburban town. Atmos Pollut Res 3:143–147CrossRefGoogle Scholar
  21. Davy P, Gunchin G, Markwitz A, Trompetter W, Barry B, Shagjjamba D, Lodoysamba S (2011) Air particulate matter pollution; determination of composition, source contribution and source locations in Ulaanbaatar, Mongolia. Atmos Pollut Res 2:126–137CrossRefGoogle Scholar
  22. Dickerson A, Benson A, Bukley B, Chan E (2017) Concentrations of individual fine particulate matter components in the USA around July 4th. Air Qual Atmos Health 10:349–358CrossRefGoogle Scholar
  23. Driussi C, Jansz J (2006) Technological options for waste minimisation in the mining industry. J Clean Prod 14:682–688CrossRefGoogle Scholar
  24. El-Nashar A (2009) Seasonal effect of dust deposition on a field of evacuated tube collectors on the performance of a solar desalination plant. Desalination 239:66–81CrossRefGoogle Scholar
  25. El-Shobokshy M, Hussein F (1993) Effect of dust with different physical properties on the performance of photovoltaic cells. Sol Energy 51:505–511.CrossRefGoogle Scholar
  26. Eras J, Gutiérrez A, Capote D, Hens L, Vandecasteele C (2013) Improving the environmental performance of an earthwork project using cleaner production strategies. J Clean Prod 47:368–376CrossRefGoogle Scholar
  27. Escobedo F, Kroeger T, Wagne J (2011) Urban forests and pollution mitigation: analyzing ecosystem services and disservices. Environ Pollut 159:2078–2087CrossRefGoogle Scholar
  28. Fajersztajn L, Saldiva P, Pereira L, Leite V, Buehler A (2017) Short term effects of particulate matter pollution on daily health events in Latin America: a systematic review and meta-analysis. Int J Public Health 62:729–738CrossRefGoogle Scholar
  29. Figgis B, Ennaoui A, Ahzi S, Rémond Y (2017) Review of PV soiling particle mechanics in desert environments. Renew Sust Energ Rev 76:872–881CrossRefGoogle Scholar
  30. Finlayson-Pitts BJ, Pitts JN (2000) Chemistry of the upper and lower atmosphere. Academic Press, Inc., San DiegoGoogle Scholar
  31. Fuzzi S, Baltensperger U, Carslaw K, Decesari S, Van Der Gon HD, Facchini MC, Fowler D, Nazionale C (2015) Particulate matter, air quality and climate: lessons learned and. Atmos Chem Phys 8217–8299Google Scholar
  32. Gawronska H, Bakera B (2015) Phytoremediation of particulate matter from indoor air by Chlorophytum comosum L. plants. Air Qual Atmos Heal 8:265–272CrossRefGoogle Scholar
  33. Gelencser A (2004) Carbonaceous Aerosol. Springer, DordrechtGoogle Scholar
  34. GhaffarianHoseini A, Nur Dalilah D, Umberto B, GhaffarianHoseinia A, Makaremia N, GhaffarianHoseinic M (2013) Sustainable energy performances of green buildings: a review of current theories, implementations and challenges. Renew Sust Energ Rev 25:1–17CrossRefGoogle Scholar
  35. Ginoux P, Prospero J, Gill T, Hsu N, Zhao M (2012) Global-scale attribution of anthropogenic and natural dust sources and their emission rates based on MODIS deep blue aerosol products. Rev Geophys 50:88CrossRefGoogle Scholar
  36. Gourdji S (2018) Review of plants to mitigate particulate matter, ozone as well as nitrogen dioxide air pollutants and applicable recommendations for green roofs in Montreal, Quebec. Environ Pollut 241:378–387CrossRefGoogle Scholar
  37. Grant M, Booth A (2009) A topology of reviews: an analysis of 14 review types and associated methodology. Health Inf Libr J 26:91–108CrossRefGoogle Scholar
  38. Grau-Bove J, Strlic M (2013) Fine particulate matter in indoor cultural heritage: a literature review. Herit Sci 1:1–17CrossRefGoogle Scholar
  39. Halvorsen R, Ruby M (1981) Benefit-cost analysis of air pollution control. Lexington, MassachusettsGoogle Scholar
  40. Haynie FH (1982) Deterioration of marble. Durab Build Mater 1:241–254Google Scholar
  41. Haywood JM, Boucher O (2000) Estimates of the direct and indirect radiative forcing due to tropospheric aerosols. Rev Geophys 38:513–543CrossRefGoogle Scholar
  42. Imhof D, Weingarter E, Ordonez C, Gehrigt R, Hill N, Buchmann B, Baltensperger U (2005) Real world emission factors of fine and ultrafine aerosol particles for different traffic situations. Environ Sci Technol 39:8341–8350CrossRefGoogle Scholar
  43. Isaifan RJ, Al-Thani H, Ayoub M, Aissa B, Koc M (2018) The economic value of common urban trees in the State of Qatar from an air quality control perspective. J Environ Sci Pollut Res 4:285–288CrossRefGoogle Scholar
  44. Isaifan RJ, Baranova EA (2013) Catalytic electrooxidation of volatile organic compounds by oxygen-ion conducting ceramics in oxygen-free gas environment. Electrochem Commun 27:164–167CrossRefGoogle Scholar
  45. Isaifan RJ, Johnson D, Mansour S, Samara A, Suwaileh W, Kakosimos K (2018) Theoretical and experimental characterization of efficient anti-dust coatings under desert conditions. J Thin Film Res 2:25–29CrossRefGoogle Scholar
  46. Isaifan RJ, Ntais S, Couillard M, Baranova EA (2015) Size-dependent activity of Pt/yttria-stabilized zirconia catalyst for ethylene and carbon monoxide oxidation in oxygen-free gas environment. J Catal 324:32–40CrossRefGoogle Scholar
  47. Isaifan RJ, Samara A, Suwaileh W, Johnson D, Yiming W, Abdallah AA, Aïssa B (2017) Improved self-cleaning properties of an efficient and easy to scale up TiO2 thin films prepared by adsorptive self-assembly. Sci Rep 7:9466CrossRefGoogle Scholar
  48. Jacobson MZ (2008) Short-term effects of agriculture on air pollution and climate in California. J Geophys Res 113:1–18CrossRefGoogle Scholar
  49. Janhäll S (2015) Review on urban vegetation and particle air pollution—deposition and dispersion. Atmos Environ 105:130–137CrossRefGoogle Scholar
  50. Jaszczur M, Teneta J, Styszko K, Hassan Q, Burzynska P, Marcinek E, Lopain N (2018) The field experiments and model of the natural dust deposition effects on photovoltaic module efficiency. Environ Sci Pollut Res 25:1–16Google Scholar
  51. Jeng H (2010) Chemical composition of ambient particulate matter and redox activity. Environ Monit Assess 169:597–606CrossRefGoogle Scholar
  52. Jimoda L (2012) Effects of particulate matter on human health, the ecosystem, climate and materials: a review. Facta Univ 9:27–44Google Scholar
  53. Kampa M, Castanas E (2008) Human health of air pollution. Environ Pollut 151:362–367CrossRefGoogle Scholar
  54. Karagulian F, Belis CA, Francisco C, Dora C, Prüss-ustün AM, Bonjour S, Adair-rohani H, Amann M (2015) Contributions to cities’ ambient particulate matter (PM): a systematic review of local source contributions at global level. Atmos Environ 120:475–483CrossRefGoogle Scholar
  55. Kazem AA, Chaichan MT, Kazem HA (2014) Dust effect on photovoltaic utilization in Iraq: review article. Renew Sust Energ Rev 37:734–749CrossRefGoogle Scholar
  56. Khanum F, Chaudhry MN, Kumar P (2017) Characterization of five-year observation data of fine particulate matter in the metropolitan area of Lahore. Air Qual Atmos Heal 10:725–736CrossRefGoogle Scholar
  57. Khodeir M, Shamy M, Costa M, Chen L, Maciejczyk P (2012) Source apportionment and elemntal composition of PM2.5 and PM10 in Jeddah city, Saudi Arabia. Atmos Pollut Res 3:331–340CrossRefGoogle Scholar
  58. Kim B, Bae C, Cheol H, Kim E, Kim S (2017) Spatially and chemically resolved source apportionment analysis: case study of high particulate matter event. Atmos Environ 162:55–70CrossRefGoogle Scholar
  59. Koç M, Ni J, Lee J, Bandyopadyay P (2004) Introduction to e-manufacturing in the industrial information technology handbook. CRC Press LLC, Boca RatonGoogle Scholar
  60. Kolominskas C, Sullivan R (2004) Improving cleaner production through pollutant release and transfer register reporting processes. J Clean Prod 12:713–724CrossRefGoogle Scholar
  61. Lambert P, Valsamis J (2013) Axial capillary forces, In: surface tension in microscopy engineering below the capillary length. Microtechnology and MEMS. Springer, 1–27Google Scholar
  62. Liang D, Ma C, Wang YQ, Wang YJ, Chen-Xi Z (2016) Quantifying PM2.5 capture capability of greening trees based on leaf factors analyzing. Environ Sci Pollut Res 23:21176–21186CrossRefGoogle Scholar
  63. Ligocki M, Salmon L, Fall T, Jones M, Nazaroff W, Cass G (1993) Characteristics of airborne particles inside southern California museums. Atmos Environ 27:697–711CrossRefGoogle Scholar
  64. Lyu W, Li Y, Guan D, Zhao H, Zhang Q, Liu Z (2016) Driving forces of Chinese primary air pollution emissions: an index decomposition analysis. J Clean Prod 133:136–144CrossRefGoogle Scholar
  65. Maghami MR, Hizam H, Gomes C, Radzi MA, Rezadad MI, Hajighorbani S (2016) Power loss due to soiling on solar panel: a review. Renew Sust Energ Rev 59:1307–1316CrossRefGoogle Scholar
  66. Maher B, Ahmed I, Davison B, Karloukovski V, Clarke R (2013) Impact of roadside tree lines on indoor concentrations of traffic derived particulate matter. Environ Sci Technol 47:13737–13744CrossRefGoogle Scholar
  67. Martinez-plaza D, Abdallah A, Figgis BW, Mirza T (2015) Performance improvement techniques for PV strings in Qatar: results of first year of outdoor exposure. Energy Procedia:1–9Google Scholar
  68. McCarthy E, Stankunas A, Yocom J, Rae D (1984) Damage cost models for pollution effects on material. US Environmental Protection Agency 1–6Google Scholar
  69. Melcher M, Schreiner M, Kreislova K (2008) Artificial weathering of model glasses with medieval composition—an empirical study on the influence of particulates. Phys Chem Glasses Eur J Glass Sci Technol B 49:346–356Google Scholar
  70. Mell W, Manzello S, Maranghides A, Buty D, Rehm R (2010) The wildland urban interface fire problem—current approaches and research needs. Int J Urban Reg Res 19:238–251Google Scholar
  71. Meng X, Garay MJ, Diner DJ, Kalashnikova OV, Xu J, Liu Y (2018) Estimating PM2.5 speciation concentrations using prototype 4.4 km-resolution MISR aerosol properties over Southern California. Atmos Environ 181:70–81CrossRefGoogle Scholar
  72. Merkisz J, Pielecha J (2015) Methods of decreasing emissions of particulate matter in exhaust gas. Nanoparticle Emissions From Combustion Engines 8:109–130Google Scholar
  73. National Research Council (1980) Controlling airborne particles. Baltimore, MD, pp 1–112Google Scholar
  74. Neff JC, Ballantyne AP, Farmer GL, Mahowald NM, Conroy JL, Landry CC, Overpeck JT, Painter TH, Lawrence CR, Reynolds RL (2008) Increasing eolian dust deposition in the western United States linked to human activity. Nat Geosci 1:189–195CrossRefGoogle Scholar
  75. Newby P, Mansfield T, Hamilton R (1991) Sources and economic implications of building soiling in urban areas. Sci Total Environ 100:347–366CrossRefGoogle Scholar
  76. Nowak DJ (2000) The effects of urban trees on air quality. USDA Forest Service, Northeastern Research Station, pp 1–4Google Scholar
  77. Ofosu FG, Hopke PK, Aboh IJK, Bamford SA (2012) Atmospheric pollution research characterization of fine particulate sources at Ashaiman in Greater Accra, Ghana. Atmos Pollut Res 3:301–310CrossRefGoogle Scholar
  78. Paudyal B, Shakya S, Paudyal D, Mulmi D (2017) Soiling-induced transmittance losses in solar PV modules installed in Katmandu Valley. Renewables Wind Water Sol 3:1–8Google Scholar
  79. Penner J, Eddleman H, Novakov T (1993) Towards the development of a global inventory for black carbon emissions. Atmos Environ 27A:1277–1295CrossRefGoogle Scholar
  80. Police S, Sahu SK, Pandit GG (2016) Chemical characterization of atmospheric particulate matter and their source apportionment at an emerging industrial coastal city. Atmos Pollut Res 7:725–733CrossRefGoogle Scholar
  81. Pöschl U (2005) Atmospheric aerosols: composition , transformation, climate and health effects. Angew Chem 44:7520–7540CrossRefGoogle Scholar
  82. Poulakis E, Theodosi C, Bressi M, Sciare J, Ghersi V, Mihalopoulos N (2015) Airborne mineral components and trace metals in Paris region: spatial and temporal variability. Environ Sci Pollut Res 22:14663–14672CrossRefGoogle Scholar
  83. Rabl A, Curtiss P, Pons P (1998) Air pollution and buildings: estimation of damage costs in France. Environ Impact Assess RevGoogle Scholar
  84. Rajšić SF, Tasić MD, Novaković VT, Tomašević MN (2004) First assessment of the PM10 and PM2.5 particulate level in the ambient air of Belgrade city. Environ Sci Pollut Res 11:158–164CrossRefGoogle Scholar
  85. Rao A, Pillai R, Mani M, Ramamurthy P (2014) Influence of dust deposition on photovoltaic panel performance. Energy Procedia 54:690–700CrossRefGoogle Scholar
  86. Rao N, Rajasekhar M, Rao G (2014) Detrimental effect of air pollution, corrosion on building materials and historical structures. Am J Eng Res 03:359–364Google Scholar
  87. Rodriguez-Navarro C, Sebastian E (1996) Role of particulate matter from vehicle exhaust on porous building stones (limestone) sulfation. Sci Total Environ 187:79–91CrossRefGoogle Scholar
  88. Rogula-kozlowska W (2016) Size-segregated urban particulate matter: mass closure, chemical composition, and primary and secondary matter content. Air Qual Atmos Heal 9:533–550CrossRefGoogle Scholar
  89. Salim A, Huraib F, Eugenio N (1988) PV power-study of system options and optimization. The 8th EU PVSEC, Florence, ItalyGoogle Scholar
  90. Samek L, Stegowski Z, Furman L, Fiedor J (2017) Chemical content and estimated sources of fine fraction of particulate matter collected in Krakow. Air Qual Atmos Heal 5:47–52CrossRefGoogle Scholar
  91. Sarti E, Pasti L, Rossi M, Ascanelli M, Pagnoni A, Trombini M, Remelli M, Pasti L (2015) The composition of PM1 and PM2.5 samples, metals and their water soluble fractions in the Bologna area (Italy). Atmos Pollut Res 6:708–718CrossRefGoogle Scholar
  92. Sayigh A, Al-Jandal S, Ahmed H (1985) Dust effect on solar flat surfaces devices in Kuwait. Proceedings of the workshop on the physics of non-conventional energy sources and materials science for energy. Triest, Italy, pp 353–367Google Scholar
  93. Shindell D (2013) Radiative forcing in the AR5. Conference Proceeding in IPCC AR5 working group I, 1–11Google Scholar
  94. Slovic AD, de Oliveira MA, Biehl J, Ribeiro H (2016) How can urban policies improve air quality and help mitigate global climate change: a systematic mapping review. J Urban Heal 93:73–95CrossRefGoogle Scholar
  95. Squizzato S, Masiol M, Rich DQ, Hopke PK (2018) PM 2.5 and gaseous pollutants in New York State during 2005–2016: spatial variability, temporal trends, and economic influences. Atmos Environ 183:209–224CrossRefGoogle Scholar
  96. Stern A, Boubel R, Turner D (1984) Fundamental of air pollution, 2nd edn. Academic Press, Inc.Google Scholar
  97. Styszko K, Jaszczur M, Teneta J, Hassan Q, Burzynska P, Marcinek E, Lopain N, Samek L (2018) An analysis of the dust deposition on solar photovoltaic modules. Environ Sci Pollut Res 25:1–9Google Scholar
  98. Sulaiman SA, Singh AK, Mokhtar MMM, Bou-Rabee MA (2014) Influence of dirt accumulation on performance of PV panels. Energy Procedia 50:50–56CrossRefGoogle Scholar
  99. Tainio M, Juda-rezler K, Reizer M, Trapp W, Skotak K (2013) Future climate and adverse health effects caused by fine particulate matter air pollution: case study for Poland. Reg Environ Chang 705–715CrossRefGoogle Scholar
  100. Tidblad J, Faller M, Grontoft T, Kreislova K, Varotsos C, de la Fuente D, Lombardo T, Doytchinov S, Bruggerhoff S, Yates T (2010) Economic assessment of corrosion and soiling of materials including cultural heritage. Proceedings in ICP materials workshop. Stockholm, SwedenGoogle Scholar
  101. Tong J, Liu X, Maghirang R, Wei K, Liu L, Wang C, Ma Y (2017) Investigation of the potential and mechanism of clove for mitigating airborne particulate matter emission from stationary sources. J Bionic Eng 14:390–400CrossRefGoogle Scholar
  102. United States Environmental Protection Agency (2009) Integrated science assessment for particulate matter. Washington DC, USAGoogle Scholar
  103. Watkiss P, Pye S, Forster D, Holland M, King K (2001) Quantification of the non-health effects of air pollution in the UK for PM10 objective analysis, pp 1–24Google Scholar
  104. Watson J, Chow J, Lu Z, Fujita E, Lowenthal D, Lawson D (1994) Chemical mass balance source appointment of PM10 during the southern California air quality study. Aerosol Sci Technol 21:1–36CrossRefGoogle Scholar
  105. Watt J, Tidblad J, Kucera V, Hamilton R, Watt J, Ab SK (2009) The effects of air pollution on cultural heritage. In: The effects of air pollution on cultural heritage. Springer, pp. 1–11Google Scholar
  106. Wiman B (1985) Aerosol depletion and deposition in forests, a model analysis. Atmos Environ 19:335–347CrossRefGoogle Scholar
  107. World Bank Group (1998) Airborne particulate matter: pollution prevention and control, pp 235–239Google Scholar
  108. World Health Organization (2003) Health aspects of air pollution with particulate matter, ozone and nitrogen dioxide. Bonn, Germany, pp 1–98Google Scholar
  109. Xu Y, Lamarque J (2018) Isolating the meteorological impact of 21st century GHG warming on the removal and atmospheric loading of anthropogenic fine particulate matter pollution at global scale. Earth’s Futur 6:428–440CrossRefGoogle Scholar
  110. Yan J, Koç M, Lee J (2004) Predictive algorithm for machine degradation detection using logistic regression. Int J Prod Plan Control 15:796–801CrossRefGoogle Scholar
  111. Yang H, Yang C, Wung C, Hseieh C, Mi H, Chi T (2001) Emission and dry deposition characteristics of metal elements from engineering constructive sites. Aerosol Air Qual Res 1:69–82CrossRefGoogle Scholar
  112. Yilbas BS, Ali H, Khaled MM, Al-Aqeeli N, Abu-Dheir N, Varanasi KK (2015) Influence of dust and mud on the optical, chemical, and mechanical properties of a PV protective glass. Sci Rep 5:15833CrossRefGoogle Scholar
  113. Yin S, Shen Z, Zhou P, Zou X, Wang W, Che S (2011) Quantifying air pollution attenuation within urban parks: an experimental approach in Shanghai, China. Environ Pollut 159:2155–2163CrossRefGoogle Scholar
  114. Zhang Q, Stanier C, Canagaratna M, Jayne J, Worsnop D, Pandis S, Jimenez J (2004) Insights into the chemistry of new particle formation and growth events in Pittsburgh based on aerosol mass spectroscopy. Environ Sci Technol 38:4797–4809CrossRefGoogle Scholar
  115. Zhao H, Che H, Zhang X, Ma Y, Wang Y, Wang H, Wang Y, Che H (2013) Characteristics of visibility and particulate matter (PM) in an urban area of Northeast China. Atmos Pollut Res 4:427–434CrossRefGoogle Scholar
  116. Zhuang BL, Wang TJ, Li S, Liu J, Talbot R, Mao HT, Yang XQ, Fu CB, Yin CQ, Zhu JL, Che HZ, Zhang XY (2014) Optical properties and radiative forcing of urban aerosols in Nanjing, China. Atmos Environ 83:43–52CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Division of Sustainable Development (DSD)Hamad Bin Khalifa University (HBKU)/Qatar Foundation (QF)DohaQatar
  2. 2.Qatar Environment and Energy Research Institute (QEERI)Hamad Bin Khalifa University (HBKU)/Qatar Foundation (QF)DohaQatar

Personalised recommendations