Abstract
In this study, palm oil mill sludge was used as a precursor to prepare biochar using conventional pyrolysis. Palm oil mill sludge biochar (POSB) was prepared at different preparation variables, i.e., heating temperature (300–800 °C), heating rate (10–20 °C/min) and holding time (60–120 min). The prepared biochars were tested for sulfur dioxide (SO2) adsorption in a fixed bed reactor using 300 ppm of SO2 gas at 300 ml/min (with N2 gas as balance). Response surface central composite experimental design was used to optimize the production of biochar versus SO2 removal. A quadratic model was developed in order to correlate the effect of variable parameters on the optimum adsorption capacity of SO2 gas. The experimental values and the predicted results of the model were found to show satisfactory agreement. The optimum conditions for biochar preparation to yield the best SO2 removal was found to be at 405 °C of heating temperature, 20 °C/min of heating rate and 88 min of holding time. At these conditions, the average yield of biochar and adsorption capacity for SO2 gas was reported as 54.25 g and 9.75 mg/g, respectively. The structure of biochar and their roles in SO2 adsorption were investigated by surface area, morphology images, infrared spectra, and proximate analysis, respectively. The characterization findings suggested that POSB adsorbs SO2 mainly by the functional groups.
Similar content being viewed by others
References
Agrafioti E, Bouras G, Kalderis D, Diamadopoulos E (2013) Biochar production by sewage sludge pyrolysis. J Anal Appl Pyrolysis 101:72–78
Akbar RS, Christopher MKC, Nurhazwani I, Padmesh TVN (2013) Adsorption of gaseous pollutants (SO2 & CO) onto palm shell activated carbon. EURECA 2013:123–124
Anis M, Astimar AA, Loh SK, Nasrin AB, Lim WS & Choo YM. (2010). Oil palm biomass products and commercialization (2015). Retrieved from http://biomass-sp.net/downloads/sdhfsd65sda23fsdf234/D4 Malaysian Palm Oil Board.pdf
Azmi NB, Bashir MJK, Sumathi S, Wei LJ (2015) Stabilized landfill leachate treatment by sugarcane bagasse derived activated carbon for removal of color, COD and NH3-N—optimization of preparation conditions by RSM. JECE 3:1287–1294
Cha JS, Park SH, Jung S-C, Ryu C, Jeon J-K (2016) Production and utilization of biochar: a review. J Ind Eng Chem 40:1–15
Chen T, Zhang Y, Wang H, Lu W, Zhou Z, Zhang Y, Ren L (2014) Influence of pyrolysis temperature on characteristics and heavy metal adsorptive performance of biochar derived from municipal sewage sludge. Bioresour Technol 164:47–54
Department of Environment, Malaysia (2000) A guide to air pollutant index in Malaysia. Retrieved from Portal Rasmi Jabatan Alam Sekitar: https://www.doe.gov.my/portalv1/wp-content/uploads/2015/09/API-Guideline.pdf
Department of Statistics, Malaysia. (2016). Compendium of Environment Statistic 2016. Retrieved from Department of Statistic Malaysia. https://newss.statistics.gov.my/newss-portalx/ep/epFreeDownloadContentSearch.seam?cid=7611https://newss.statistics.gov.my/newss-portalx/ep/epFreeDownloadContentSearch.seam?cid=7611
Devi P, Saroha AK (2013) Effect of temperature on biochar properties during paper mill sludge pyrolysis. Int J ChemTech Res 5(2):682-687
Fu P, Yi W, Bai X, Li Z, Hu S, Xiang J (2011) Effect of temperature on gas composition and char structural features of pyrolyzed agricultural residues. Bioresour Technol 102(17):8211-8219
Gai X, Wang H, Liu J, Zhai L, Liu S, Ren T (2014) Effects of feedstock and pyrolysis temperature on Biochar adsorption of ammonium and nitrate. PLoS One 9(12):e113888. doi:10.1371/journal.pone.0113888
Gwenzi W, Muzava M, Mapanda F, Tauro TP (2016) Comparative short-term effects of sewage sludge and its Biochar on soil properties, maize growth and uptake of nutrients on a tropical clay soil in Zimbabwe. J Integr Agr 2016 15(6):1395–1406
Hossain MK, Strezov V, Chan KY, Ziolkowski A, Nelson PF (2011) Influence of pyrolysis temperature on production and nutrient properties of wastewater sludge biochar. J Environ Manag 92:223–228
IBI (2012) “Standardized product definition and product testing guidelines for biochar that is used in soil”. Retrieved from International Biochar Initiative: http://www.biochar-international.org/characterizationstandard
Jiang X, Liu Y, Gu M (2011) Absorption of sulphur dioxide with sodium citrate buffer solution in a rotating packed bed. Chin J Chem Eng 19(4):687–692
Karatepe N, Orbak I, Yavuz R, Özyug˘Uran A (2008) Sulfur dioxide adsorption by activated carbons having different textural and chemical properties. Fuel 87:3207–3215
Lau LC, Nor NM, Lee KT, Mohamed AR (2015) Selection of better synthesis route of CeO2/NaOH/PSAC for hydrogen Sulphide removal from biogas. JECE 3:1522–1529
Lehmann J, Pereira da Silva J, Steiner C, Nehls T, Zech W, Glaser B (2003) Nutrient availability and leaching in an archaeological Anthrosol and a Ferralsol of the Central Amazon basin: fertilizer manure charcoal amendments. Plant Soil 249:343–357
Liu Z-S (2008) Adsorption of SO2 and NO from incineration flue gas onto activated carbon. Waste Manag 28:2329–2335
Lua AC, Yang T (2009) Theoretical and experimental SO2 adsorption onto pistachio-nut-shell activated carbon for a fixed-bed column. Chem Eng J 155:175–183
Maˇsek O, Budarinb V, Gronnowb M, Crombiea K, Brownsorta P (2013) Microwave and slow pyrolysis biochar—comparison of physical and functional properties. J Anal Appl Pyrol 100:41–48
Macias-Perez MC, Lillo-Rodenas MA, Bueno-Lopez A, de Lecea CSM, Linares-Solano A (2008) SO2 retention on CaO/Activated carbon sorbents. Part II: effect of the activated carbon support. Fuel 87:2544–2550.
Mehrara H, Shishesaz MR, Rouzbehani B (2013) A novel selective flue gas SO2 removal with an amine absorbent. Int J Sci Emerging Tech 6(1):216–221
Melo LCA, Coscione AR, Abreu CA, Puga AP, Camargo OA (2013) Influence of pyrolysis temperature on cadmium and zinc sorption capacity of sugar cane straw-derived biochar. Bioresources 8(4):4992–5004
Novak JM, Busscher WJ, Laird DL, Ahmedna M, Watts DW, Niandou MAS (2009) Impact of biochar amendment on fertility of a southeastern coastal plain. Soil Sci 174:105–112
Özçimen D (2013) An approach to the characterization of biochar and bio-oil. In Renewable energy for sustainable future. ISBN:978–1–477554-890. (pp. 41–58). iConcept Press
Özçimen D, Ersoy-Meriçboyu A (2010) Characterization of biochar and bio-oil samples obtained from carbonization of various biomass materials. Renew Energ 35:1319–1324
Panahi PN, Salari D, Niaei A, Mousavi SM (2013) NO reduction over nanostructure M-Cu/ZSM-5 (M: Cr, Mn, Co and Fe) bimetallic catalysts and optimization of catalyst preparation by RSM. J Ind Eng Chem 19:1793–1799
Park HJ, Park Y-K, Kim JS (2008) Influence of reaction conditions and the char separation system on the production of bio-oil from radiata pine sawdust by fast pyrolysis. Fuel Process Technol 89:797–802
Parveen FR, Rajeev PS, Ibrahim MH, Norizan E (2010) Review of current palm oil mill effluent (POME) treatment methods: vermicomposting as a sustainable practice. World Appl Sci J 11(1):70–81
Peterson SC, Jackson MA (2014) Simplifying pyrolysis: using gasification to produce corn stover and wheat straw biochar for sorptive and horticultural media. Ind Crop Prod 53:228–235
Srinivasan P, Sarmah AK, Smernik R, Das O, Mohammed F, Gao W (2015) A feasibility study of agricultural and sewage biomass as biochar, bioenergy and biocomposite feedstock: production, characterization and potential applications. Sci Total Eviron 512-513:495–505
Srivastave RK, Jozewicz W (2001) Flue gas desulfurization: the state of the art. J Air Waste Manage Assoc 51:1676–1688
Sumathi S, Bhatia S, Lee KT, Mohamed AR (2009a) Performance of an activated carbon made from waste palm shell in simultaneous adsorption of SOx and NOx of flue gas at low temperature. Sci China Technol Sc 52:198–203
Sumathi S, Bhatia S, Lee KT, Mohamed AR (2009b) Optimization of microporous palm Shell activated carbon production for flue gas desulphurization: experimental and statistical studies. Bioresour Technol 100:1614–1621
Thangalazhy-Gopakumar S, Adhikari S, Ravindran H, Gupta RB, Fasina O, Tu M, Fernando SD (2010) Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactor. Bioresour Technol 101(21):8389-8395
Thangalazhy-Gopakumar S, Al-Nadheri WMA, Jegarajan D, Sahu JN, Mubarak NM, Nizamuddin S (2015) Utilization of palm oil sludge through pyrolysis for bio-oil and bio-char production. Bioresour Technol 178:65–69
Yahaya SM, Lau S (2013) Palm oil effluent (POME) from Malaysia palm oil Mills: waste or resource. IJEST 2(6):1138–1155
Yanli W, Zhanggen H, Zhenyu L, Qingya L (2004) A novel activated carbon honeycomb catalyst for simultaneous SO2 and NO removal at low temperatures. Letters to the Editor, Carbon 42:423–460
Yuan H, Lua T, Wanga Y, Huanga H, Chena Y (2014) Influence of pyrolysis temperature and holding time on properties of biochar derived from medicinal herb (Radix Isatidis) residue and its effect on soil CO2 emission. J Anal and Appl Pyrol 110:277–284
Zell H, Quarcoo D, Scutaru C, Vitzthum K, Uibel S, Schöffel N (2010) Air pollution research: visualization of research activity using density-equalizing mapping and Scientometric benchmarking procedures. J Occup Med Toxicol 5(5):1–9
Zhang J, Liu L, Liu R (2015) Effects of pyrolysis temperature and heating time on Biochar obtained from the pyrolysis of Straw and lignosulfonate. Bioresour Technol 176:288–291
Acknowledgements
The authors wish to acknowledge the Universiti Tunku Abdul Rahman (UTAR) for the research grant provided for this project (UTARRF/C2-10/S6) and Kementerian Pendidikan Tinggi (KPT) on MyBrain15 program for the student’s financial support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Guilherme L. Dotto
Rights and permissions
About this article
Cite this article
Iberahim, N., Sethupathi, S. & Bashir, M.J.K. Optimization of palm oil mill sludge biochar preparation for sulfur dioxide removal. Environ Sci Pollut Res 25, 25702–25714 (2018). https://doi.org/10.1007/s11356-017-9180-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-017-9180-5