Correction to: Interlaboratory Reproducibility of Contour Method Data Analysis and Residual Stress Calculation

The original version of this article has been corrected to include authors middle initials in the author list. The details given in this correction are correct.

Author information

Authors and Affiliations

Department of Mechanical and Aerospace Engineering, University of California, One Shields Avenue, Davis, CA, 95616, USA
C. R. D’Elia & M. R. Hill
Mechanical Engineering, Aerospace Structures Section, Southwest Research Institute (SwRI), 6220 Culebra Rd, San Antonio, TX, 78238, USA
S. S. Carlson & M. L. Stanfield
Los Alamos National Laboratory, Los Alamos, NM, 87545, USA
M. B. Prime
StressMap, Engineering & Innovation, Open University, N2024, Venables Bldg. Walton Hall, Milton Keynes, MK7 6AA, UK
J. Araújo de Oliveira
United States Air Force, Air Force Research Laboratory, 2790 D. St. Wright-Patterson, AFB, Fairborn, OH, 45433, USA
T. J. Spradlin
Hydro-Québec Research Institute, 1800, Lionel-Boulet, Varennes, Québec, J3X 1S1, Canada
J. B. Lévesque

Authors

C. R. D’Elia
View author publications
You can also search for this author in PubMed Google Scholar
S. S. Carlson
View author publications
You can also search for this author in PubMed Google Scholar
M. L. Stanfield
View author publications
You can also search for this author in PubMed Google Scholar
M. B. Prime
View author publications
You can also search for this author in PubMed Google Scholar
J. Araújo de Oliveira
View author publications
You can also search for this author in PubMed Google Scholar
T. J. Spradlin
View author publications
You can also search for this author in PubMed Google Scholar
J. B. Lévesque
View author publications
You can also search for this author in PubMed Google Scholar
M. R. Hill
View author publications
You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. R. Hill.

Additional information

The online version of the original article can be found at https://doi.org/10.1007/s11340-020-00599-0

Rights and permissions

Reprints and permissions

About this article

Cite this article

D’Elia, C.R., Carlson, S.S., Stanfield, M.L. et al. Correction to: Interlaboratory Reproducibility of Contour Method Data Analysis and Residual Stress Calculation. Exp Mech 60, 1033 (2020). https://doi.org/10.1007/s11340-020-00616-2

Download citation

Published: 17 June 2020
Issue Date: September 2020
DOI: https://doi.org/10.1007/s11340-020-00616-2

Use our pre-submission checklist

Avoid common mistakes on your manuscript.