Advertisement

Wireless Personal Communications

, Volume 101, Issue 3, pp 1295–1305 | Cite as

Adaptive Filtering Algorithm in Clock Calibration System

  • Zan Liu
  • Xiaopeng Liu
  • Xihong Chen
Article

Abstract

Clock bias is a vital element in clock calibration system. Aiming at effectively eliminating noises contained in clock bias and improving accuracy of time synchronization, we propose an adaptive algorithm. In this adaptive algorithm, ensemble empirical mode decomposition (EEMD) is employed to decompose original data to different intrinsic mode functions (IMFs). For accurately abandoning IMFs which contain plentiful noises, principal components analysis (PCA) is proposed. Eigenvalues of all IMFs are ascertained on the bias of PCA. Then, bias between adjacent eigenvalues is used to evaluate level of noises contained in each IMF. Finally, residual IMFs are used to reconstruct the signal. Clean signal with adding noises is used to evaluate this improved algorithm. Consequence indicates that this improved algorithm is effective. We design a clock calibration experiment, where the time signal is transferred through a  wireless channel. The adaptive algorithm is used to dispose bias, which is acquired in clock calibration experiment. Consequence also demonstrates that this algorithm can effectively and adaptively eliminate noises contained in actual data.

Keywords

Clock calibration Clock bias Empirical mode decomposition (EEMD) Principal components analysis (PCA) 

Notes

Acknowledgements

This work was supported by the National Natural Science Fund of China under Grant No. 61671468.

References

  1. 1.
    Xiang, W., Xu, B., Mou, W., & Wang, F. (2013). A clock error calibration algorithm based on phase lock loop in GNSS time synchronization receiver. Journal of National University of Defense Technology, 35(2), 115–119.Google Scholar
  2. 2.
    Wan, H., Diouris, J. F., & Andrieux, G. (2012). Time synchronization for cooperative communication in wireless sensor networks. Wireless Personal Communications, 35(4), 977–993.CrossRefGoogle Scholar
  3. 3.
    Maitra, S., & Newman, K. (2010). Time synchronization protocol with minimum message communication for high latency networks. Wireless Personal Communications, 55(4), 525–537.CrossRefGoogle Scholar
  4. 4.
    Arceo-Miquel, L., Shmaliy, Y. S., & Ibarra-Manzano, O. (2009). Optimal synchronization of local clocks by GPS 1PPS signals using predictive FIR filters. IEEE Transactions on Instrumentation and Measurement, 58(6), 1833–1840.CrossRefGoogle Scholar
  5. 5.
    Dinc, E., & Akan, O. B. (2015). A nonuniform spatial rain attenuation model for troposcatter communication links. IEEE Wireless Communications Letters, 4(4), 441–444.CrossRefGoogle Scholar
  6. 6.
    Huang, W., & Defraigne, P. (2016). BeiDou time transfer with the standard CGGTTS. IEEE Transactions on Ultrasonics, Ferrolectrics, and Frequency Control, 63(7), 1005–1012.CrossRefGoogle Scholar
  7. 7.
    Shmaliy, Y. S., Manzano, O. I., Arceo-Miquel, L., & Munoz-Diaz, J. (2008). A thinning algorithm for GPS-based unbiased FIR estimation of a clock TIE model. Measurement, 41(5), 538–550.CrossRefGoogle Scholar
  8. 8.
    Zhao, S., Shmaliy, Y. S., & Liu, F. (2016). Fast Kalman-like optimal unbiased FIR filtering with applications. IEEE Transactions on Signal Processing, 64(9), 2284–2297.MathSciNetCrossRefGoogle Scholar
  9. 9.
    Lin, S. G. (2015). Assisted adaptive extended Kalman filter for low-cost single-frequency GPS/SBAS kinematic positioning. GPS Solutions, 19(2), 215–223.CrossRefGoogle Scholar
  10. 10.
    Lei, Y., He, Z., & Zi, Y. (2011). EEMD method and WNN for fault diagnosis of locomotive roller bearings. Expert Systems with Applications, 38(6), 7334–7341.CrossRefGoogle Scholar
  11. 11.
    Jia, R. S., Zhao, T. B., Sun, H. M., & Yan, X. H. (2015). Micro-seismic signal denoising method based on empirical mode decomposition and independent component analysis. Chinese Journal of Geophysics, 58(3), 1013–1023.Google Scholar
  12. 12.
    Jiang, H., Li, C., & Li, H. (2013). An improved EEMD with multiwavelet packet for rotating machinery multi-fault diagnosis. Mechanical Systems and Signal Processing, 36(2), 225–239.CrossRefGoogle Scholar
  13. 13.
    Shi, X., Zhou, F., Tao, M., & Zhang, Z. (2016). Human movements separation based on principle component analysis. IEEE Sensors Journal, 16(7), 2017–2027.CrossRefGoogle Scholar
  14. 14.
    Shokri, S., Sadeghi, M. T., Marvast, M. A., & Narasimhan, S. (2015). Soft sensor design for hydrodesulfurization process using support vector regression based on WT and PCA. Journal of Central South University, 22(2), 511–521.CrossRefGoogle Scholar
  15. 15.
    Pyatykh, S., Hesser, J., & Zheng, L. (2013). Image noise level estimation by principal component analysis. IEEE Transactions on Image Processing, 22(2), 687–699.MathSciNetCrossRefzbMATHGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Air and Missile Defense CollegeAir Force Engineering UniversityXi’anChina

Personalised recommendations